707307
11
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
11
Program Change Increment/Decrement
Using the Hammer 88 editor application, it is possible to configure the Pedal inputs or /+ buttons to send
an Increment (increase) or Decrement (decrease) Program Change message each time it is pressed. When
one pedal is configured to increment through sound Programs (such as, 1, 2, 3, etc.), and another to
decrement through them (such as, 127, 126, 125, etc.), the second pedal will not decrement from where the
first pedal left off (for example, 2, 1, 0). This is in contrast to the buttons. The + button will only increment
and the button will only decrement. Pressing + to increment to the value of 127 and then pressing the
button will decrement the value to 126. Furthermore, pressing the sends values such as 127, 126, 125,
etc, and will decrement from where the + button left off (for example, 125, 126, 127). When set to Program
Inc/Dec, each of the buttons will light up white briefly when pressed.
MMC
The and + buttons can be assigned to send a MMC (MIDI Machine Control) message. MMC is a transport
control protocol that is used to remotely control some recording hardware and DAWs. When set to MMC,
the button will send a Stop message and the + button will send a Play message. The and + buttons will
be lit red while stopped and green while playing.
Editing Controls Using the Editor Application
For full details on editing controls, see the separate Hammer 88 Preset Editor User Guide on m-audio.com.
Troubleshooting
General
Here are answers to common questions you may have when using your Hammer 88 keyboard:
Problem 1: My M-Audio hardware suddenly stopped working after having performed fine since
installation.
Solution 1: Switch off the unit and let it sit for 10 seconds. Then restart your computer and try again.
Problem 2: I have plugged a sustain pedal into my M-Audio keyboard, but it works opposite as to
what I'm expecting.
Solution 2: The polarity of the sustain pedal is calculated by the keyboard when it is powered on. When
Hammer 88 is powered on, the sustain pedal is assumed to be in the OFF position. If you want the sustain
pedal to be off when it is not depressed, make sure the pedal is not depressed when you power on Hammer
88.
Problem 3: When I press a key, there is a delay before I hear any sound.
Solution 3: This delay is known as latency. Latency with MIDI signals is due to the software application you
are using. MIDI data is simply control data. The MIDI data is read by your software. The software then
completes a large number of complex calculations in order to produce the sound you hear—all this takes
time.
We strongly recommend a proper audio interface. Refer to m-audio.com for a selection of options. If you
already have an adequate audio interface, try reinstalling the latest drivers for the audio interface, or try
reducing the buffer sizes of the audio drivers.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

M-Audio-Hammer-88

Zoeken resetten

  • Hoe kan ik bij een Hammer 88 de aanslag veranderen? Of beter: de aanslag zwaarder instellen. Volgens de handleiding kan dat met de volume knop, maar in de editor vind ik geen gegevens van de volume knop. Heeft iemand hier ervaring mee? Gesteld op 26-4-2020 om 14:18

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw M-Audio Hammer 88 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van M-Audio Hammer 88 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info