586987
24
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 24
Troubleshooting
When I connect the LynxONE analog outputs to the MIC inputs on my
Mackie mixer I hear distortion.
The MIC inputs are being overdriven. Even with the mic gain adjusted to its lowest
setting, the maximum signal level that the MIC inputs of the smaller Mackie mixers
can handle is +14 dBu. In the +4 dBu trim setting, the LynxONE is capable of delivering
a +20 dBu signal. To solve this problem use 1/4” line inputs of the mixer. This requires
the use of XLR to TRS adapters as described in the “External Connections” section.
I connect my microphone directly to the LynxONE Analog Input
connectors, but the level is very low, what is going on?
The LynxONE Analog Input connectors should be connected line level devices only.
To record from a microphone, first route the signal through a micrphone pre-amplifier
or mixer and then into the LynxONE.
Where on the LynxONE do I connect my internal CD-ROM drive?
The LynxONE has no connector for an internal CD-ROM drive. We recommend using
digital audio extraction software to capture the audio data from your CD’s and saving
it to your hard disk drive as .WAV files. Using this method, the audio files can be
played back using the D/A converters on the LynxONE which have far superior
performance to those found in most CD-ROM drives. If your CD-ROM/DVD drive
can reliably extract digital audio then you could use Windows Media Player (Version 7
or higher) to extract digital audio from CDs and play it in real-time with no physical
connection between the LynxONE and the CD-ROM drive.
Can I leave my current sound card in my computer while using the
LynxONE?
You may leave your existing sound card in your computer as long as you have a free
PCI slot and interrupt for the LynxONE. You may need to reconfigure certain software
to access the LynxONE instead of your existing sound card. Please refer to the “Working
with Third Party Applications” section for details.
When I look at the LynxONE resources using Windows 95 Device Manager,
the computer hangs.
This is a bug in Windows 95. The computer is not actually hung, it is just scanning a
very large portion of memory. If you wait a couple of minutes, it will come back to
life! The only fix we know of is to upgrade to Windows 95 OEM Service Release 2
(950B) or Windows 98.
Can the LynxONE share interrupts with other devices?
The LynxONE is able to share interrupts with other PCI devices, as long as the other
PCI device’s driver is written correctly to share interrupts. The LynxONE is not able
to share interrupts with ISA devices (such as a modem, serial port, printer port, keyboard
or mouse). The BIOS on many motherboards require the user to manually reserve an
interrupt (IRQ) for an ISA device. If this is not done the BIOS may assign an ISA
device and a PCI device the same interrupt which results in a conflict.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx ONE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx ONE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info