586987
20
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 20
Configuring Multiple LynxONE’s
Configuring Multiple LynxONE’s
Up to four LynxONE cards can be installed in a computer for additional audio and
MIDI channels. If required, all LynxONE’s in a computer can be configured to maintain
sample accurate synchronization during digital audio recording and playback.
Cards are synchronized in a master-slave arrangement. One card is selected as the
master which provides the word clock source for the other slave cards in the system.
From the master, the word clock signal is daisy-chained from one slave to the next.
Word clock signals can be connected internally using the Internal Clock Cable, which
is available from Lynx. The CLOCK OUT header of one card is connected to the
CLOCK IN header of the next card. A separate cable is required for each slave card in
the system.
Alternatively, the CLOCK IN and CLOCK OUT connectors on the MIDI/Clock cable
can be connected externally with a standard 75 ohm BNC cable.
Adapter ID’s in a Multiple Card System
When multiple LynxONE cards are installed in a computer they are automatically
assigned unique adapter ID numbers. These adapter ID’s provide a means to identify
and communicate with each LynxONE when using the LynxONE Mixer application
and to select audio devices in third party applications.
In the LynxONE Mixer, the adapter that a user wishes to control is selected from the
Mixer pull-down menu. In a system with four LynxONE’s the adapters will be listed as
follows:
LynxONE 1 Mixer
LynxONE 2 Mixer
LynxONE 3 Mixer
LynxONE 4 Mixer
In each case, the adapter ID is the numeric character in each selection.
Most third party applications provide a setup or configuration menu for selecting a
desired wave audio device for recording and playback. With multiple LynxONE’s in a
system, each device name will contain the adapter ID. For example, the analog output
device on adapter 2 would be listed as “LynxONE 2 Analog Output”.
Selection of Master and Slave Clocks
In order to select master and slave LynxONE’s in a system, each adapter ID must be
first physically associated with a LynxONE installed in a computer slot. Since ID
assignment is automatic, determining this association is somewhat trial and error. The
procedure is as follows:
1. Connect at least one analog output channel of each LynxONE to an amplifier,
mixing console or other equipment that will provide audio monitoring.
2. Choose an audio application that allows selection of wave audio devices for audio
playback.
3. Select “LynxONE 1 Analog Output” as the playback device.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx ONE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx ONE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info