586987
12
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 12
Quick Audio Test
The installation of your LynxONE can be tested using the LynxONE Mixer and the
Sound Recorder application that ships with Windows 95/98 and Windows NT. Any
other audio application capable of audio recording and playback can be used in a
similar manner.
1. Connect a stereo analog signal source to the LEFT IN and RIGHT IN connectors
on the Audio cable.
2. Connect the LEFT OUT and RIGHT OUT connectors to an amplifier or mixer
capable of delivering an audio signal for listening via headphones or speakers.
3. Open the LynxONE Mixer by double clicking on the mixer icon.
4. In the LynxONE Mixer, set the Trim to either +4 dBu or -10 dBV to match the
signal level of the connected equipment.
5. In the LynxONE Mixer, set the Monitor Source to Analog In (this is the default
setting). Click on the Monitor button on the Analog Out panel to enable analog
input monitoring. You should hear the signal from the audio source which is
connected to the analog inputs. If this is not the case, check your connections.
Note, in this monitoring mode the peak level meters in the LynxONE mixer do not
operate.
6. Disable input monitoring by again clicking on the Monitor button on the Analog
Output panel. After doing so, this button should look like it is in the “out” or non-
depressed position.
7. Start Sound Recorder by clicking Start > Programs > Accessories > Multimedia >
Sound Recorder. Position Sound Recorder on your screen so it be easily viewed
along with the LynxONE Mixer.
8. In Sound Recorder, select the LynxONE’s audio devices by opening the Edit menu
and selecting Audio Properties. Select LynxONE Analog Out as the Preferred
device for playback and LynxONE Analog In as the Preferred device for recording.
9. Record a short sample by clicking the red record button followed by the stop
button in Sound Recorder. During recording, you should observe a graphic display
of the waveform being recorded in the center display in Sound Recorder. You
should also see activity on the Analog In peak meters of the LynxONE Mixer.
10. Playback the test sample by clicking the play button in Sound Recorder. During
playback, you should observe a graphic display of the waveform being played in
Sound Recorder. You should also hear the recorded audio and see activity on the
Analog Out peak meters of the LynxONE Mixer.
If the test did not operate as described or you received any errors, please refer to the
“Troubleshooting” section of this manual.
Using Your LynxONE
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx ONE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx ONE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info