586987
9
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 9
Please note that with 16 dB of headroom, the LynxONE’s analog outputs are capable
of delivering +20 dBu signal levels. It is important to verify that the equipment you
are driving is capable of handling these signal levels in order to prevent clipping or
possible damage.
Digital Audio
The XLR connectors on the Audio Cable, labeled DIGITAL IN and DIGITAL OUT
are used for AES/EBU and S/PDIF digital audio connections. Connect AES/EBU
devices directly and select AES/EBU Digital Format in the LynxONE mixer application.
Connect to S/PDIF devices using XLR-to-RCA adapters such as the Lynx CBL-
XF2RM18 (female XLR) and the Lynx CBL-XM2RM18 (male XLR). Select S/P DIF
Digital Format in the LynxONE mixer application. Refer to the “XLR Connector Wiring
and Adapters” section for information regarding XLR adapter construction.
MIDI Connections
The 5-pin DIN connectors on the MIDI/Clock Cable are used to connect to the
LynxONE’s two MIDI ports. The MIDI IN 1 and MIDI OUT 1 connectors provide
connections for MIDI port 1. The MIDI IN 2 and MIDI OUT 2 connectors provide
connections for MIDI port 2. Use standard shielded MIDI cables to connect to external
MIDI equipment.
Clock Input and Output
The BNC connectors on the MIDI/Clock Cable, labeled CLOCK IN and CLOCK
OUT are used to synchronize the LynxONE with external equipment. The connectors
support TTL level signals and should be connected with 75-ohm coaxial cable. Connect
the CLOCK IN connector to the clock output of an external device and select External
as the Sample Clock Source in the LynxONE mixer. Adjust the clock Reference to
match the incoming clock type.
CLOCK OUT is a word clock that tracks the sample rate of the LynxONE. Connect
this output to the word clock input of an external device.
Header Connectors
The Header connectors labeled CLOCK IN and CLOCK OUT are used to synchronize
the LynxONE with internal equipment located inside your computer. For systems
containing multiple LynxONE’s, these connectors are utilized to synchronize the sample
clocks of each card. The connectors support TTL level signals and should be connected
using the Lynx Internal Clock Cable or similar 75-ohm coaxial cable.
Connect the CLOCK IN connector to the clock output of an internal device and select
Header as the clock source in the LynxONE mixer. Adjust the clock Reference to
match the incoming clock type.
The signal on the CLOCK OUT header is a word clock that tracks the sample rate of
the LynxONE. Connect this output to the word clock input of an internal device or
another LynxONE.
External Connections
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx ONE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx ONE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info