586988
11
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 11
Mixer Configuration Recall
The state of the Mixer settings are saved each time Windows is shut down. The stored
settings are automatically recalled the next time Windows is restarted.
Clock Source Requirements
A valid clock source signal must be connected to the appropriate Lynx L22 clock
connector when the Sample Clock Source is set to either Digital, External, or Header.
If a signal is not present, the sample clock generator will run very slowly or erratically.
Symptoms of this problem include audio files that sound either fast, slow or garbled.
When a valid clock source is present, the frequency and type of clock signal must
match the Sample Clock Reference setting selected in the Mixer. The frequency of
word clock sources, chosen by setting the Sample Clock Source/Reference to either
Digital/Auto, External/Word, or Header/Word, must match the sample rate specified
when recording new files or the sample rate associated with a previously recorded file
during playback. For example, if a 44.1 kHz word clock is connected to the external
clock input, the Sample Clock Source/Reference must be set to External/Word and the
sample rate must be set to 44.1 kHz when a new file is being recorded in an application.
Failure to do so will result in files being recorded at the wrong sample rate.
Volume Faders and Signal Quality
The faders in the Lynx L22 Mixer perform digital attenuation on audio signals in the
digital domain. The attenuation is applied to the digitized signals just prior to the D/A
converters.
As with any digital signal processing function, the digital attenuation calculations used
by the Lynx L22 can introduce arithmetic errors that can add small amounts of noise to
signals. To insure the highest signal quality it is highly recommended that the faders
be left in their maximum position during critical recording and playback. In this
position, no attenuation calculations are performed.
Mono Recording and Playback Operation
When recording a file in mono, the Lynx L22 will provide an audio signal from the left
channel only. The audio signal from right channel is not used. When playing back a
file in mono, the Lynx L22 will send the signal to both the left and right outputs. To
force playback on a single output, turn up the volume for the desired output, and turn
down the volume for the output to be muted.
Using Your Lynx L22
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx L22 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx L22 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info