586998
14
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
14
5.4.2 Digital In
When Digital In is selected, the card will slave to the clock that is presented to its digital
inputs. In the case of the E44, where there are two pairs of digital inputs available, you can
choose between “Digital In 1” or “Digital In 2”. As with word clock, it is crucial that the
clock source be set to the same sample rate as the project or audio file being played.
If the clock source is a SPDIF device, make sure that the digital input is configured for
SPDIF (see Section 5.1: Hardware Installation).
5.4.3 Multiple Lynx cards
The E22/E44 cannot be used in a system with Lynx PCI cards, such as the AES16 or
LynxTWO. However, multiple E22/E44 and Lynx AES16e cards can be used in one
computer. Up to four of any combination of PCIe Lynx cards can be used in a single system.
In a multi-card system there are two primary options for insuring clock synchronicity:
A. The first way is to have one Lynx card be the clock master. In this scenario, clock is
distributed internally from one card to the others. Each Lynx card has two clock
header connections on the PCIe edge of the board. One connector is labelled “Clock
In” and the other is labelled “Clock Out”. The Lynx CBL-ICC cable is used to
connect these ports together.
Connect the CBL-ICC cable from the “Clock Out” of the card that you wish to be
Card #1, to the “Clock In”: of Card #2. If there are more than two cards in the system,
continue to daisy chain: “Clock Out” from card 2 to “Clock In” for card #3, etc. If
there are four cards in the system, we would not recommend this clock method.
Instead, all cards should be clocked externally for optimal performance.
In multiple Lynx card configurations, cards are identified numerically as Card #1,
Card #2, etc. in the Lynx Mixer as well as in the driver devices that you will see in
your recording software. The card order can be changed after the fact by the user,
from within the Lynx Mixer. See Section 8.1.2: Setting device order. In a multi-card
configuration it is essential that that the card that is the clock Master be Card #1.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lynx E44 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lynx E44 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info