532761
7
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
7
LUVION Premium Babyproducts
continously detected. In that case the monitor will be activated for another 5 seconds.
There are 2 reasons to use the scan button: 1- to prevent you from being disturbed by the
bright LCD screen, or 2- to save energy. Press the scan button again to deactivate the scan
mode.
19. Speaker Produces the sound from the baby unit.
20. AV out Audio-video socket which allows you to connect a television or monitor to the
parent unit, using the RCA cable.
Note: When the RCA cable is connected the screen of the parent unit will be turned o.
21. Charging indication LED The LED is red when the built-in battery is being charged and
22. turns green when it is fully charged.
23. Foot Enables you to position the parent unit on a at surface.
24. Battery compartment This compartment allows the battery to be replaced. Only use
25. original Luvion batteries.
26. DC in Connect the included DC 5V power adapter to power and/or charge
the parent unit.
27. On/O button Turns the parent unit ON or OFF.
OVERVIEW OF BABY UNIT (CAMERA)
1. Temperature sensor Measures the temperature.
2. Pair button The pair button is located at the back of the baby unit. It enables you to
reconnect the baby and parent unit or to connect additional baby units.
3. Camera antenna Sends and recieves signals to/from the parent unit.
4. Lens / Infrared light These LEDs are automatically activated when the room gets darker
and enable you to monitor the baby under no/low light conditions. The infrared LEDs do
use a lot of energy and can therefore empty the batteries more quickly.
5. ON/OFF button Turns the baby unit ON or OFF.
6. Microphone Recieves sounds from the area near the baby unit and transmits it to the
parent unit.
7. Night light Press this button to turn on the night light. The night light can also be turned
on/o remotely with the parent units night light button.
8. Sensitivity To adjust the sensitivity of the camera. A lower sensitivity means that sounds
recieved by the baby unit need to be louder to be transmitted to the parent unit. A higher
sensitivity means that at a low sound level the sounds will be transmitted to the parent unit.
Note: If you wish to monitor every sound. Go to Menu Auto Mute and select NO. This will activate
an “open channel”.
9. ECO switch Allows you to set a lower transmitting power. This will save energy.
10. Volume To increase or decrease the volume of the lullabies.
11. DC 5V power Enables you to connect the baby unit to the electricity grid.
Note: The baby unit also works on 4 AA batteries (not included). Do not leave the batteries in the
baby unit when you use it with the power adapter.
12. Battery compartment Open this compartment to place 4AA batteries to power the baby unit.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Luvion-PRESTIGE-TOUCH

Zoeken resetten

  • Mijn monitor kan niet meer schakelen tussen 2 camera's. Dan blijft het lampje cam1 en cam2 snel knipperen zonder beeld! Meer mensen hier last van of weet iemand hoe het op te lossen is? Gesteld op 26-11-2015 om 20:09

    Reageer op deze vraag Misbruik melden
  • Ik heb 2 camera's en hij schakelt om de paar seconden over. Dat wil ik anders instellen, kan dat? Gesteld op 20-10-2015 om 22:38

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Luvion PRESTIGE TOUCH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Luvion PRESTIGE TOUCH in de taal/talen: Frans, Spaans, Pools, Noors als bijlage per email.

De handleiding is 1,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Luvion PRESTIGE TOUCH

Luvion PRESTIGE TOUCH Gebruiksaanwijzing - Nederlands, English - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info