719258
7
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
5
Crank
Closing screw
Funnel/housing
Pressing screw bushing
Pressing screw
Nylon seal
Clamping screw
Outlet screw (for wheat grass)
Housing clamping knob
Base
Stuffer/lever
Juice container
Fixture
Sieve
Screw wrench
The juice extractor is delivered with two spare
seals.
ASSEMBLY AND OPERATING MANUAL
• Install the parts to inside the housing
(Note: The bushing of the pressing screw is al-
ready in the correct place).
• Push the housing onto the base (Fig. 1).
IMPORTANT
Pay attention that the nylon seal is in the cor-
rect place. The housing clamping knob must
be loosened before the housing can be mounted
on or removed from the base.
• Set the clamping screw on “Lock” and tight-
en the small outlet screw . (By tightening the
outlet screw you exert more pressure dur-
ing the juice extraction process (for leafy and
fibrous vegetables such as parsley and wheat
grass). This is not necessary for the majority of
fruits and vegetables.
You can also vary the distance between the
clamping screw and the pressing screw by
means of the enclosed screw wrench
in or-
der to increase or to decrease the extraction
pressure).
• We recommend that you secure the juice ex-
tractor with the fixture .
• Ensure that the assembly surface is clean and
dry.
• Place the juice extractor near the edge of the
table or the working surface.
• Fix the housing firmly by turning the hous-
ing clamping knob in clockwise direction
(Fig. 2). Use the stuffer/lever if necessary.
Mount the fixture if necessary.
• Position the crank at the rear end of the
pressing screw housing and tighten the closing
screw
on the crank .
• Place the juice container on the side of the
socket so that it catches the juice coming from
the spout.
• Place a bowl (not included) for catching the
pomace under the outlet screw .
• Put the fruits and vegetable into the funnel
, while turning the crank in the clockwise
direction (Fig. 4).
IMPORTANT
The foodstuff should be cut in small strips or
pieces and pushed slowly into the funnel. Here-
with, if possible, place the strips directly on the
right next to the pressing screw.
• If your encounter too much resistance, turn the
crank briefly in a counter-clockwise direction
and continue in the clockwise direction.
Do not use excessive force!
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lurch Green Power bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lurch Green Power in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info