599375
26
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
24
Continue entering your altitude, present time and date the same way you
entered your present position. If you make a mistake entering a number,
use the arrow keys to move back to the number that you wish to change,
then enter the correct number.
When all of the numbers on the screen are correct, press the “ENT” key.
This sends the values you entered to the GPS module which should
shorten the time required for it to find the satellites and return your present
position. If you don’t move a long distance (over 100 miles) with the unit
turned off, then you probably won’t need to do the initialization again, since
it stores all of the last known position settings in memory each time it’s
turned off. An internal clock keeps track of the time, even when the unit is
turned off, so that it will be correct the next time it’s used.
Once the GPS module finds the satellites and displays the correct latitude/
longitude for your position, then the GlobalMap 2000 is ready for use.
COLD START
When the GlobalMap 2000 is turned on for the first time “out of the box”,
it automatically sends a “cold start” message to the Lowrance GPS
module. You can also send a cold start message to the receiver. If the unit
can’t lock on to the satellites using the data you’ve given it, or if it has trouble
finding the satellites, perhaps it is using the wrong data. This can happen
if you’ve entered the wrong data by accident. For example, given it east
longitude instead of west. Or if you’ve moved a long distance with the unit
turned off.
To send a cold start message to
the receiver, first press the
MENU key. Now press the key
next to the “GPS/DGPS Setup”
label. The screen at right ap-
pears. Finally, press the key
next to the “Cold Start GPS
Receiver” label. The unit will
begin a cold start technique to
find the available satellites. It
should lock on to them in less
than 15 minutes. Remember,
when it does, your local time
and possibly date display will probably be wrong. Use the method shown
above to set the time and date. Once this is done, an internal clock will keep
the correct time, even when the unit is turned off. The GPS system updates
this clock when the unit is locked on to the satellites.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lowrance GlobalMap 2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lowrance GlobalMap 2000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info