599375
12
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
10
NMEA 0183, VERSION 1.5 WIRING CONNECTIONS
The shielded red and green wires are for a NMEA 0183, version 1.5
interface. The GlobalMap 2000 sends data to other electronic navigation
devices through the green wire and receives NMEA data through the red
wire. If the red and green wires are not used, tape their ends so that they
cannot short.
To connect a device to the mapping unit’s NMEA 0183 version 1.5 input
(send data to the GlobalMap 2000), attach a twisted pair cable from the
device’s NMEA output to the red shielded wire on the NMEA cable and the
black wire (ground) on the POWER cable. (See page 12 for wiring
diagrams.)
To connect a device to the NMEA 0183 version 1.5 output (GlobalMap
2000 sends data to another device), attach a twisted pair cable from the
other device’s NMEA 0183 input to the green wire on the NMEA cable and
the black wire on the POWER cable. See the other instrument’s manual for
more wiring instructions.
NMEA VERSION 2.0 WIRING CONNECTION
Use the four shielded red, black, white and green wires on the NMEA cable
for a NMEA 0183, version 2.0 interface. This is a shielded, balanced line
interface. Do not use the shield on these wires! Trim the shield back, away
from the splice when you attach wires from another device to the mapping
unit. The GlobalMap 2000 sends data (transmits) to another electronic
navigation device through the shielded white and green wires and receives
NMEA data through the shielded red and black wires. If the any of these
wires are not used, tape their ends so that they cannot short.
To send version 2.0 data to the GlobalMap 2000, connect the other
device’s NMEA 0183 version 2.0 output to the mapping unit’s NMEA 0183
version 2.0’s input (GlobalMap receives data) by attaching a twisted pair
cable from the other device’s NMEA output to the shielded red and black
wires on the mapping unit’s NMEA cable.
In order for the GlobalMap 2000 to send data to another device, connect
the other device’s NMEA 0183 version 2.0 input to the mapping unit’s
NMEA 0183 version 2.0’s output (GlobalMap sends data) by attaching a
twisted pair cable from the other device’s NMEA input to the shielded white
and green wires on the mapping unit’s NMEA cable.
For the GlobalMap 2000 to both send and receive NMEA 0183, version 2.0
data , see the wiring diagram at the bottom of page 13.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lowrance GlobalMap 2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lowrance GlobalMap 2000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info