22
Use the Reset Values command to clear all data stored in EP-85R
memory.
NOTE:
After using the Reset Values command to clear EP-85R memory,
you will have to re-enter your engine-tank configuration. The Reset
Values command will not affect the configuration or calibration of
other devices on the network.
To reset values:
1. Press MENU, select SYSTEM SETUP and press ENTER.
2. Highlight
BUS DEVICES and press ENTER. Select STRG DEV (Storage
Device) and press
ENTER. The Configuration Options menu will appear
with two options: Fuel Wrng and Reset Values.
3. Select
RESET VALUES and press ENTER. The following message will
appear: Press Enter to Reset Device Values. Press
ENTER.
4. Press
EXIT repeatedly to return to the main display.
