17
4. A recalibration window will appear with two options: Yes and No.
Select
NO and press ENTER. The following message will appear: Press
Enter after refilling the fuel tank.
5. Press
ENTER. You will be directed back to the main display.
Partial Fill
Since the EP-85R is not connected to the tank, its fuel information is
not automatically updated when fuel is added to the tank. When you
add fuel to a tank without completely filling it up, you must use the
Partial Fill command. This will ensure the fuel information in the EP-
85R stays consistent with the amount of fuel actually in the tank.
NOTE:
When using the Partial Fill command, you will only be able to input
a fuel amount less or equal to the fuel used figure. The unit will not
allow you to input a fuel amount greater than the fuel used figure.
To use Partial Fill:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER. Highlight FUEL SETUP and press ENTER.
2. Select
PARTIAL FILL and press ENTER. The Select Tank menu will
appear with up to three options. (If you have one tank, you will be
taken directly to the Adding Fuel window.)
3. Select the desired tank and press
ENTER. The Adding Fuel window
will appear.
NOTE:
When using the Partial Fill command, you will only be able to input
into the gauge, an amount of fuel less or equal to the fuel used
figure. The unit will not allow you to enter a fuel amount greater
than the fuel used figure.
4. Use the
UP and DOWN keys to input the amount of fuel added to the
tank and press
ENTER. You will be taken back to the main display.
Economy Speed Source
The Economy Speed menu allows you to choose what speed source
(Water Speed, Pitot Speed or Ground Speed) the LMF-400 will use to
calculate Fuel Economy. Ground Speed is the default speed source.
To change Economy Speed source:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
ENTER. Select FUEL SETUP and press ENTER.
2. Highlight
ECO SPEED SRC and press ENTER to open the Economy Speed
