593845
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
1
SPORTS
CHARACTERISTICS
1. Time/calendar display: Hour, minutes,
seconds, month, date and day of the week.
Automatic calendar: Calendar adjusts
automatically for odd and even months
except February of leap years.
Time indication: Changeover between
12- and 24-hour indications is possible.
2. Stopwatch: Measures up to 30 hours
with 1/1,000 second readout.
Split time measurement is available.
3. Countdown timer: Up to 99 hours and
59 minutes can be set in minutes.
4. 3-channel alarm: The alarm can be set
to ring at three different times a day.
Hourly time signal: Can be set to ring
every hour on the hour.
5. Dual time: Time of a different time zone
can be set and displayed.
6. Illuminating light: The light illuminates
the display in the dark.
HOW TO SET THE TIME/CALENDAR
1. Press button “A” to show the time/calendar
display.
2. Press button “B” to show the time/calendar
setting display. The second digits start
flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “C”.
Hour
Seconds
Notes:
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. Only “P” (PM) mark is displayed and
there is no indication for the AM setting.
In the 24-hour indication, “24” (24-hour
indication) mark is displayed.
Seconds setting
When the seconds digits are flashing, press
button “D” in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds count any number from
“30” to “59” and button “D” is pressed, one
minute is added and the seconds are immediately
reset to “00”.
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 30 hours
in 1/1,000 seconds.
* Even if the stopwatch display is changed
to another while the measurement is in
progress, it continues counting properly.
After the stopwatch is used, however, be
sure to reset it as the battery energy is
consumed enormously to shorten the battery
life.
Stopwatch Operation
Start
Stop
Restart
Stop
Accumulated elapsed time measurement
CC C
Press button “A” to show the stopwatch display.
C
D
Reset
Accumulate repeatedly by
pressing button “C”.
2. If the watch is left untouched in the time/
calendar setting display with the digits
flashing, it will automatically return to the
time/calendar display in 2 minutes.
Seconds
MinutesHour
BUTTONS AND DISPLAYS
Month
B
The selection of the display can be made in
the following order with each press of button
“A”.
Stopwatch
display
Time/calendar
display
A
A
A
Timer
display
A
A
Alarm
display
Dual time
display
Seconds
MinutesHour
B
C
Month
“P” (PM)
mark
A
D
Date
Day
C
D
A
B
Stopwatch
display
indicator
1/1,000 seconds
Hour
Minutes
Seconds
Hourly time
signal mark
“P” (PM)
mark Alarm mark
A
D
C
Day
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
button “D”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “D” pressed.
5. After all the adjustments are completed,
press button “B” to return to the time/
calendar display.
12-/24-hour
indication
Date
Month
Minutes
Date
Display
indicators
Alarm
channel
Display
indicators
INSTRUCTION MANUAL
CAL. W110 (RBQ SERIES)
CAL. W111 (RB8 SERIES)
NREW110C
11-99
Measurement between two competitors
Split time measurement
Start
C
DCD
Split
Split release
Stop Reset
D
Finish (First runner)
C
DC D D
Finish (Second runner)
Start
Finish time
of 2nd
competitor
ResetStop
Measurement and release of split time
can be repeated by pressing button “D”.
Finish
time of 1st
competitor
HOW TO SET THE 3-CHANNEL
ALARM
1. In the alarm display, selection of the alarm
channel or hourly time signal to be engaged
or disengaged is made in the following order
by pressing button “C”.
Engagement/disengagement of the
alarm and hourly time signal
• The alarm can be set to ring at three different
times a day. Set the three alarm channels
one by one to desired alarm times.
1. Press button “A” to show the alarm display.
2. Selection of the alarm channel to be set is
made in the following order by pressing
button “C”.
* The alarm cannot be set in the hourly
time signal display.
Channel 1
Channel 2
MinutesHour
3. By pressing button “D” to set the digits in
the alarm setting display, the alarm mark
is displayed and the alarm is automatically
engaged.
4. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 2 minutes.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that “A” (AM)/“P ”
(PM) mark is correctly set. In the 24-hour
indication, “24” (24-hour indication) mark
is displayed.
2. [Alarm and hourly time signal engagement/
disengagement]
With each press of button “D”, the alarm of
the selected channel or hourly time signal
is engaged and disengaged alternately.
* The alarm and hourly time signal can be
engaged and disengaged independently
of each other.
Indication of
the alarm
channel
Alarm/hourly
time signal
engaged
Alarm/hourly
time signal
disengaged
1
2
3
(Hourly time
signal)
The alarm rings at the designated time for
20 seconds and stops. To stop it manually,
press button “A”, “B”, “C” or “D”.
The alarm can be tested by keeping button
“D” pressed in the alarm display.
Hour
Hourly time
signal mark
Alarm mark
Alarm display
indicator
Alarm channel
HOW TO SET THE DUAL TIME
Time of a different time zone can be set and
displayed together with the time you have set
in “HOW TO SET THE TIME/CALENDAR”.
1. Press button “A” to show the dual time
display.
2. Press button “B” to show the dual time
setting display.
3. To set the digits, refer to “HOW TO SET
THE TIME/CALENDAR”.
1
B
A
D
C
Minutes
“A” (AM)/“P”
(PM) mark
AD
B
C
Hour Minutes
“A” (AM)/“P”
(PM) mark
Dual time
display
indicator
Channel 3
Hourly time
signal display
3. Press button “B” to show the alarm setting
display. The hour digits (and “A”/“P”
mark if the time is set in the 12-hour indication)
start flashing.
4. Press button “C” to select the digits to be
adjusted (flashing).
5. Press button “D” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
6. After all the adjustments are completed,
press button “B” to return to the alarm
display.
* To set more than one alarm channel,
follow the procedure above starting from
the step “2”.
Channel 3
Hourly time
signal display
Channel 1 Channel 2
HOW TO USE THE COUNTDOWN
TIMER
The timer can be set up to 99 hours and 59
minutes in minutes.
LUMIBRITE WATCH
(dial, hands, buttons, case, bezel,
strap, etc.)
If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit
the light they store, the brightness will
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
ILLUMINATING LIGHT
When button “D” is pressed in the time/
calendar or dual time display, the light illuminates
the display for easy viewing in the dark.
The remaining time is displayed in 1/10
seconds.
Timer setting
Timer operation
Press the button in the following order.
Time-up
Stop
Restart
Warning
sound
beeps
Start
Restart and stop of the
timer can be repeated by
pressing button “C”.
* When the set time is up, a warning sound
beeps for 10 seconds. To stop it manually,
press button “A”, “B”, “C” or “D”.
CCC
2. Press button “B” to show the timer setting
display. The hour digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “C”.
4. Press button “D” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed,
press button “B” to return to the timer
display.
Note: If the watch is left untouched in the
timer setting display with the digits
flashing, it will automatically return
to the timer display in 2 minutes.
1. Press button “A” to show the timer display.
Timer
display
indicator
ViViDiGi
ViViDiGi is a new type of liquid crystal panel
that makes possible various colors and high
contrast.
Excellent light reflection and transmission
make the display bright and clear.
Various color options are available.
• Either the whole panel or the displayed
data only can be illuminated.
* Features vary in different models.
BATTERY CHANGE
The miniature lithium battery PANASONIC
CR2025,which powers your watch should last
approximately 5 years. However, because it
is inserted at the factory, the actual life of
the battery once in your possession may be
less than the specified period. Be sure to
replace the battery to prevent any possible
malfunction as soon as it runs down. To
replace the battery, we recommend taking
the watch to a local watch repair shop.
Note: If the alarm is used for more than 3
seconds a day, the illuminating light
for more than 4 seconds a day and/or
the timer warning sound for more than
10 seconds a week, the battery life
may be less than the specified period.
Minutes SecondsHour
C
A
D
B
Set time
Time
measured
1/10
seconds
D
MinutesHour
CARE OF YOUR LORUS WATCH
• BATTERY
• WATER RESISTANT
No
indication
WATER
RESISTANT
WATER
RESISTANT
(50 M/5 BAR)*
WATER
RESISTANT
100 M/
10 BAR or
above
Condition
of use
Accidental
contact with
water, such
as splashes
and rain
Swimm-
ing and
taking a
shower
Skin
diving
Scuba
diving
Indica-
tion on
the dial/
case back
NO NO NO NO
YES YES NO NO
YES NO NO NO
YES
YES YES NO
()
*
CAUTION
Do not expose the old battery to
fire or recharge it. Keep it at a
place beyond the reach of chil-
dren. If a child swallows it, consult
a doctor immediately.
* If your watch is 200 M/20 BAR, 100 M/10
BAR or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
Do not operate the buttons when the watch
is wet.
If the watch is exposed to salt water, rinse
it in fresh water and then wipe it thoroughly
dry.
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and
those with delicate skin may develop a
rash. Please wear the watch with some
play to avoid any possible allergic reaction.
If you develop a rash on your wrist, stop
wearing and consult a physician.
• MAGNETISM
Your watch will not be affected by mag-
netism generated by household electric
appliances.
• SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or
hit it on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem-
perature.
SERVICE
When your LORUS watch requires repair or
servicing, please see the enclosed WARRANTY/
GUARANTEE.
Printed in China
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus W111 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus W111 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info