522471
81
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
83
User Manual
searching for MIRROR C-CARDs. When one or more MIRROR C-CARD is found (in
one or both chart plotters) a special connection is established between the chart plotters to
habilitate the MIRROR C-CARDs. If a regular C-CARD which has previously activated a
MIRROR C-CARD is removed, even the MIRROR C-CARD will be not read anymore on
the other unit.
4.8 C-LINK NAVIGATION DATA TRANSFER
This function allows transferring C-Link Navigation Data (Route Name, Destination
ID & Position, Next Waypoint ID & Position, Total Route length, Fuel Consumption Rate,
ETA, TTG etc.) between two chart plotters linked through the C-Link system. The chart
plotters can be set to operate in two modes:
MASTER mode (Primary chart plotter that sends data)
SLAVE mode (Secondary chart plotter that receives data)
When the navigation is activated on the Master chart plotter, the C-Link Navigation
Data will be continuously sent to the Slave until the navigation is active. If the Master is
navigating to a Single Destination, the Slave will show the Destination position and activate
the navigation to it. If the Master is navigating to a Route, the Slave will show the Route Leg
composed by the Destination and the Waypoint after the Destination (Next Waypoint) and
activate the navigation to it. Any variation to the current C-Link Navigation Data will be
transferred from the Master to the Slave. The Slave will be provided with a few dedicated
pages to show the C-Link Navigation Data received from the Master.
4.8.1 OPERATIONS
4.8.1.1 Introductive elements
It is important remark, once more, that this function does not transfer the whole
Route but just the information relative to the navigation. Such information will be removed
from the Slave chart plotter as soon as the navigation is terminated. C-Link Navigation
Data is exchanged by using two NMEA-0183 C-MAP proprietary sentences: $PCMPN,1
and $PCMPN,2. When the navigation is activated on the Master, it starts outputting the
C-Link Navigation Data. If the Slave is connected, all C-Link Navigation Data received are
stored in its memory and the navigation is started. The information sent by the Master
consists of the following values:
Navigation mode (to Single Destination/to a Route )
Route Name*
81

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Lorenz-COMPACT-X7

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorenz COMPACT X7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorenz COMPACT X7 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info