Handleiding Longines L296 (pagina 41 van 50) (Engels)

757257

Verklein

Vergroot

Pagina terug

1/50

Pagina verder

Quartz chronographs L442

SPLIT-SECONDS function

Between START and STOP, press push-piece C to activate the

SPLIT-SECONDS function. The SPLIT-SECONDS and 30-MINUTE

counter hands will stop. The 1/10th of a SECOND counter hand will

move to the nearest measured one tenth. Meanwhile, the 60-SECOND

counter will not stop running.

After reading the measured time, press push-piece C to reactivate

the measured time display. The SPLIT-SECONDS and 30-MINUTE

counter hands will catch up to the positions corresponding to the

ongoing elapsed time. The 1/10th of a SECOND counter hand will

return to zero.

Pressing push-piece B before the chrono has been stopped will

restart the counters at zero, and the intermediate time will be lost.

Pressing push-piece B after the chrono has been stopped will

cause a RESET.

MEMO function

If STOP has been engaged during a SPLIT-SECONDS function, the

counters will move to display the measured STOP time. Press push-

piece C for a reminder of the previous intermediate time. Pressing

this same push-piece again will display the nal time again.

Pressing push-piece C alternates between the intermediate time

display and nal time display for the ongoing timing operation. This

is the MEMO function.

After STOP has been engaged, pressing push-piece B will cause a

RESET, and all the counters will return to zero. The timing operation

will nish, and the chronograph will return to watch mode. If RESET

is engaged before you have read the stop time, the 60-SECOND

and SPLIT-SECONDS counter hands are not superimposed as they

move to zero.

Note:

There is no possible confusion in reading the intermediate and stop

times. When you read the chrono stop time, the 60-SECOND and

SPLIT-SECONDS counter hands are actually superimposed, whereas

for the intermediate time, they are never superimposed.

However, if a chrono STOP function occurs exactly one or more

minute after an intermediate time (i.e. the 60-SECOND and SPLIT-

SECONDS counters are indicating the same value), the 60-SECOND

counter is deliberately offset by one position when reading the

intermediate time in MEMO function. In this way the hands of these

two counters are only superimposed for the stop time, and the rule

above is obeyed.

Important notes

a) It is possible to combine the various Chrono functions (SIMPLE,

ADD, SPLIT-SECONDS and MEMO) in the same timing operation. For

example, during a MEMO function you can restart the time measure-

ment (ADD) without losing the memorised time.

b) Unless timing is deliberately stopped (pressing STOP), the

chronograph hands will keep running. Continuous running of the

chronograph will greatly reduce the autonomy of the movement.

Hands initial positioning mode

The four chronograph counters are initialised to their start point

digitally, by means of the push-pieces.

The four chronograph counter hands are positioned in sequence via

the push-pieces with the crown pulled out to position 2.

After pulling the crown out to position 2, the four counter hands -

SPLIT-SECONDS and CHRONO 60-SECOND in the centre, CHRONO

1/10th of a SECOND at 2 o'clock and CHRONO 30-MINUTE at 10

o'clock will move to their start point, normally zero, at 12 o'clock. The

two centre hands will make this movement together. If the watch was

in RESET status, the hands are already zeroed. If there is a timing

operation in progress, the hands will move to their start point. Then

they will all complete one quick circle of the dial. During this complete

rotation, none of the hands will move at the same time. The rst

hand to make its rotation is the tenths hand, then the split-seconds

hand, the chrono seconds hand and nally the chrono minute hand.

Pressing push-piece A will move the selected hand to indicate which

hand will be moved by pressing push-piece B.

Each successive press on A selects the next hand.

02-English.indd 89 14.11.18 15:43

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Longines L296 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Longines L296

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info