679332
31
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Troubleshooting
Problem Possible Cause Remedy
Not working at all Mains cable not plugged in. Plug the mains cable firmly into the socket on the Sound
Projector and then into a 220-240 V 50 Hz socket with pro-
tective ground.
The unit suddenly switches to standby. The internal temperature is too high which has
activated the protective circuit to avoid overheating.
Wait for approx. 1 hour until the unit has cooled down and
then switch it on again.
No sound. Faulty connections of input or output cables. Connect the cables properly (page 13 - page 15). If the problem
persists, it is possible that the cables are faulty.
No suitable input signal source has been selected. Select a suitable input source using AUX (PIP) or SOURCE.
The volume is set at minimum. Turn up the volume.
The sound is set to mute.
Press
or V + on the remote control to activate audio output
again and then adjust the volume.
No sound from the effect channels. You are trying to play back the signal source or the
programme in stereo.
Press one of the sound field programme buttons on the remote
control to select a multichannel playback mode and try again
to play back the signal source or the programme.
No sound from the centre or the surround
channels.
The source level of the affected channel is set to
minimum.
Increase the level of the channel (page 28).
The surround sound effects can hardly be heard. The listening room has an irregular shape. Install this unit in a square or rectangular room (page 11).
There is no reflection wall for the sound beam. Try setting up a flat object, such as a screen, as a replace-
ment wall.
There is noise interference if no subwoofer is
connected to this unit.
The protective circuit was active because a source with
strong bass elements was being played.
Reduce the volume or connect a subwoofer and set the settings
for a subwoofer via the sound menu (page 28).
The on-screen dialogue (OSD) does not appear. The socket VIDEO OUT/HDMI on this unit is not con-
nected to the input sockets on your TV set.
Connect the socket VIDEO OUT (Composite) on this unit to
the input sockets on your TV set.
The unit is not working properly. Unplug the mains plug from the mains socket and then try
plugging it in again after 30 seconds.
The sound effects are not satisfactory. The original signal source contains surround effects. Deactivate the surround effect settings on this unit.
Auto set-up is unsuccessful. See the error messages on page 32.
The remote control is not working properly. The batteries in the remote control are dead. Replace the batteries with new ones.
Set the remote control for Sound Projector operation.
31 -
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Loewe Sound Projector ID bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Loewe Sound Projector ID in de taal/talen: Engels als bijlage per email.

De handleiding is 2,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Loewe Sound Projector ID

Loewe Sound Projector ID Gebruiksaanwijzing - Nederlands - 36 pagina's

Loewe Sound Projector ID Gebruiksaanwijzing - Deutsch - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info