645574
149
Verklein
Vergroot
Pagina terug
1/227
Pagina verder
Loewe bild
User handbook
149
Teaching the remote control
Teaching the remote control
By means of key code 18 (Set-Top Box data base) your remote control
Loewe assist may be taught for your Set-Top Box (e.g., decoder, ex-
ternal cable tuner). Thus, you spare yourself the use of several remote
controls.
The following options are available for teach-in:
- Entering a 3-digit code number
- Read-out of the programmed Set-Top Box code
- Teaching individual keys
- Delete learned codes
In the following, the STB key is dealt with as an example. Code 18
may also be assigned to the VIDEO and AUDIO keys; the following
description applies accordingly.
Programming with set button with button code 18
For the use of 2-digit key codes see chapter External devices,
section Setting the remote control.
Press set button STB and at the same time STOP
button for 5 seconds, until the corresponding LED
indicator flashes twice.
Enter set code 18 .
The associated LED indicator flashes twice.
Entering a 3-digit code number
The STB key can be programmed directly by means of a device-
dependent 3-digit code. You find a list of these codes in chapter Code
page at the end of this user handbook.
The STB set button must be programmed with
button code 18.
Keep the STB and OK keys depressed for five seconds.
The LED above the STB key flashes twice.
Enter the 3-digit code from the list. The LED above the
STB key lights up for 1 second.
OK end the programming mode. After a successful
programming the LED flashes twice.
When entering a wrong code number, the LED lights
up for 2 seconds. Do this programming once again.
Read-out of the programmed Set-Top Box code
The code of the currently programmed device on the STB key can be
indicated by the remote control.
The STB set button must be programmed with
button code 18.
Keep the STB and OK keys depressed for five seconds.
The LED above the STB key flashes twice.
Press INFO key.
The LED above the STB key shows the programmed
code by flashing. The figure "0" will be indicated by
flashing 5 times.
Teaching individual keys
All keys (except the TV, STB, VIDEO and AUDIO device keys as well
as the V+/- keys
and ) can be taught for the operation of units
which are not contained in the integrated data base. The functions of
the selected button are then completely or partially overwritten with
the new codes.
Place the TV remote control and the remote control to be replaced
in such a way that the infrared windows face each other at a distance
of 1-5 cm (see sketch).
Preparation:
The STB set button must be programmed with
button code 18.
Keep the STB and the red key simultaneously
depressed for five seconds.
The LED above the STB key lights up permanently.
Learning function:
Press key to be taught on the TV remote control.
The LED above the STB key flashes.
On the original remote control press the button which
is to be taught.
The LED above the selected STB key flashes twice.
If the code is not correctly recognised, the LED above
the STB key flashes ten times.
Then repeat your entry on the original remote
control. If necessary correct the allocation of the two
remote controls.
Continue with the other buttons as described above.
Terminate learning mode:
To end the teaching mode, press the STB key again.
After 10 seconds without an entry the teaching mode
is automatically terminated.
It is possible that not all remote control codes can
be taught.
1-5 cm
149

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Loewe Bild 1.65 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Loewe Bild 1.65 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Loewe Bild 1.65

Loewe Bild 1.65 Gebruiksaanwijzing - Nederlands - 224 pagina's

Loewe Bild 1.65 Snelstart handleiding - Nederlands - 14 pagina's

Loewe Bild 1.65 Gebruiksaanwijzing - Deutsch - 225 pagina's

Loewe Bild 1.65 Snelstart handleiding - Deutsch - 14 pagina's

Loewe Bild 1.65 Snelstart handleiding - English - 14 pagina's

Loewe Bild 1.65 Snelstart handleiding - Français - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info