744838
17
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
17 GB/IE
Preparation
Tools and materials required
The specified tools and materials are not included.
The information and values specified are non-bind-
ing and are only provided as a reference. The na-
ture of the material is determined by the specific
local conditions.
Pencil / marking tool
2-pole voltage tester
– Screwdriver
Electric drill
Drill bit (approx. ø 6 mm)
– Hammer
Side cutter
– Ladder
For your safety!
Install the light so it is protected from moisture,
dirt and extreme heating.
Always be alert! Always pay attention to what
you are doing and use common sense. Never
install the light if you are having difficulty con-
centrating or do not feel well.
Before drilling, ensure that there are no gas or
water pipes or power cables where you intend
to drill. Installation may only be carried out by
experts. It is essential that you take note of how
the wall is constructed, as the included fittings
are not suitable for all types of wall. Ask the re-
tailer about screws and wall plugs suitable for
the respective wall structure.
The manufacturer accepts no responsibility for
an inappropriate wall to wall plug connection
and any resulting damage.
Verify the installation site is suitable to bear the
weight of the light before installation.
Familiarise yourself with all instructions and di-
agrams in this manual as well as with the light
itself before use.
Mounting the LED light panel
DANGER OF ELECTRIC
SHOCK!
Important: The electrical connection must be
established by a qualified electrician or a per-
son trained to perform electrical installations.
This person must be familiar with the properties
of the light and the connection requirements.
For this purpose, remove the fuse or switch off
the circuit breaker (0 setting) in the fuse box.
Remove all packaging materials from the light.
Remove the visible screws
3
for the LED light
panel
8
and remove the mounting bracket
2
at the back.
Use the holes in the mounting bracket
2
in-
tended for the screws
4
to mark the drill holes.
Now drill the mounting holes. Be sure not to
damage the power cable.
Insert the wall plugs
1
into the drilled holes.
Secure the mounting bracket
2
using the
screws
4
provided (see Fig. A).
Pull the protective tubes
6
over cables L and
N of the mains connection cable (external)
7
.
Connect the connection cable of the light to
the mains connection cable (external)
7
using
the screwless terminal
5
(see Fig. A).
Be sure to correctly connect each of the individ-
ual conductors of the mains connection cable
(external)
7
: live conductor, black or brown =
symbol L, neutral conductor, blue = symbol N,
protective conductor, green-yellow = symbol
.
Now attach the LED light panel
8
to the mount-
ing bracket
2
using the screws
3
(see Fig. B).
Replace the fuse or switch on the circuit
breaker (I setting) in the fuse box.
Your LED light panel
8
is now ready to use.
This LED light panel
8
is also suitable for
installation as a recessed light in suspended
ceilings.
Installation for this purpose must be carried out
by a professional, as the exact dimensions of
the light must be taken into account in the ceil-
ing construction.
Safety Preparation / Mounting the LED light panel
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LivarnoLux IAN 334437 LED Panel bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LivarnoLux IAN 334437 LED Panel in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 0,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info