793230
10
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
LivarnoLux LTLS 10 A1
8 - English
If you want to place the sun lamp on a flat surface, unfold the base of the lamp (5) on the back side.
The base of the lamp (5) can be unfolded in a continuous manner, allowing you to adjust the tilt of the
sun lamp exactly as you wish. Please note that the tilt angle may not exceed 30 degrees. This is to
ensure that the sun lamp is positioned securely.
You can use the assembly materials provided to mount the lamp on a wall. Please find out in advance
which assembly materials are suitable for the location you have chosen to mount the lamp. Assembly
materials suitable for wall mounting on concrete are provided with the sun lamp.
Measure the distance between the two required drill holes between the two fixing lugs (6), as
shown in the following diagram.
Mark the positions of the drill holes on the wall. The holes must be placed on a horizontal line.
Use the suitable tool to drill holes that suit the assembly materials used.
Insert the raw plugs if this is required for the assembly materials you are using. Screw in the
screws until approximately 5 mm of the screw heads are protruding.
Insert the small plug of the mains adapter into the mains adapter port (7) before you continue.
This step will not be possible later.
Fold the base of the lamp (5) upwards and press firmly near the hinge a second time in order
to fit the base of the lamp (5) flatly against the back wall.
Mount the sun lamp on the screws so that the screw heads poke through the round openings on
the lower side of the fixing lugs (6).
Finally, slide the sun lamp evenly downwards by approx. 10----12 mm. The screw heads should
now be positioned behind the narrow ends of the fixing lugs (6), keeping the sun lamp securely
in place. Check whether the sun lamp is fixed securely by gently pulling it towards you. If the
sun lamp is not properly fixed, repeat the steps above. You may have screwed the screws too
far into the wall. If this is the case, unscrew them slightly and try again.
Insert the mains adapter into an easily accessible, live power socket.
Raw plugs may not be necessary for some walls, such as walls made of wood. If this is the case, you can
screw the screws directly into the wall. If you don’t have any experience working with tools or feel unsure
which assembly materials are suitable for your wall, find someone who has the right skills to help you.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Livarno LTLS10A1 - IAN 280564 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Livarno LTLS10A1 - IAN 280564 in de taal/talen: Nederlands, Duits, Engels, Pools, Deens als bijlage per email.

De handleiding is 3.92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info