Handleiding Line 6 POD HD500X (pagina 7 van 18) (Engels)

693636

Verklein

Vergroot

Pagina terug

1/18

Pagina verder

youarepluggingPODHD500X1/4-inchoutputsintolinelevel,not

microphone or guitar level inputs. Line level inputs should allow you

to turn POD HD500X MASTER VOLUME up all the way (or close to

it) and thereby get the best sound possible.

Ifyourgearhasinputsthatfunctionasmic/linelevelinputs,tryto

set the trim for those inputs to the minimum level, and POD HD500X

MASTER VOLUME to maximum, when setting levels. There is also

a switch which allows you to set the line outputs to amp (instrument)

or line level.

Having said all that, it is recommended that you start with the

MASTER VOLUME control set to minimum and slowly turn the

control clockwise towards maximum before any audio clipping (the

bad kind of distortion) occurs.

13. Foot Switches - In standard operation your foot switches work as

follows:

Bank Up, Down - These choose amongst 16 banks of presets in

your current Set List. Once you've navigated your way to a new

bank, step on the A, B, C or D Foot Switch to actually load a preset

from that bank.

FS 1- FS 4 - (Top row) These assignable foot switches turn the

eectsandampmodelsonorojustlikeaMIDIcontrollerorboard

full of analog pedals.

A, B, C & D - (Bottom row) From the factory these foot switches

provide instant access to presets A-D from the current bank selected.

You can change this behavior in the SYSTEM & I/O pages to provide

four additional assignable on/o controls. Even in this mode (FS

5-8) you can still access presets by pressing the Bank Up, Down

Footswitches. Pressing either the Bank Up, Down Footswitches

cues the current bank for access to A, B, C or D – loading the preset

causes the footswitches to instantly revert to FS 5-8 mode.

Tap Tempo - Stomping the TAP button a few times sets the tempo

ofalleectswiththeTAPfeatureassignedtothem.Mosttime-based

eectsinPODHD500XcanhavetheTAPsettingaectparameters

set to a specic note value. Press and hold TAP to enter Tuner

Mode.Nowyou'vegotafancychromatictunerinyourDisplay.

Looper - EquipsyourPODHD500Xwithupto48secondsoflooping

capability. The PRE/POST footswitch allows you to set your loop

recordingandplaybackeitherbeforeampandeectsmodelingor

after(LEDo=PRE,LEDon=POST).RecordinginPRE mode (LED

o)let’syourecordyourguitar,thenauditionvariouseectswithyour

loop playing back, while recording in POST mode (LED on) captures

your amp and eects in the loop and then layer dierentsounds

by changing presets. Stomp REC/OVERDUB to start recording a

loop then stomp PLAY/STOP to end loop and immediately start

playback. You can overdub additional parts by again, stomping

the REC/OVERDUB switch. Stomp PLAY/STOP to stop or start

playback. If you make a mistake on your last overdub press UNDO

to erase it. Use 1/2 SPEED at any time to double the loop time

normally available at Full Speed and hear playback at half the original

loop speed - this changes the pitch of everything down 1 octave too.

Press REVERSE to hear your playback backwards - xirdneH imiJ

ekil tsuJ. You can exit Looper Mode even when a loop is still playing

toswitchpresetsorturnampsandeectson/oandreturnbackto

add additional loops. How cool is that?

The factory default settings for the Looper Display is ALL VIEWS. If

the user wants to set it to PERFORMANCE VIEW then it will only

showinthedisplaywhileinthismode.Thebenettothedefault

is the user will always know if they're in looper mode or not. The

PERFORMANCE VIEW setting has the benet of being able to

manipulate model parameters while looping.

Note: Changing the state of the PRE/POST footswitch while the loop

is playing back can dramatically change the volume, so be careful!

14. Expression Pedals - The lights to the left of this pedal show when

an Expression Pedal is engaged and active. The pedal equipped

on your POD HD500X can toggle between EXP 1 and EXP 2

functionality via the pedal’s integrated toe switch. You can add a

second Expression Pedal to give simultaneous controls of EXP 1

and EXP 2 via the PEDAL 2 Input on the back of your POD HD500X.

You can assign these pedals for Volume, Wah, or to tweak multiple

parametersofanyeectsandampmodelsinyoursignalpath.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Line 6 POD HD500X Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Line 6 POD HD500X

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info