693631
75
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
POD Farm 2 Basic User Guide - Standalone Operation
4•4
Main Control Bar
The Main Control Bar is always shown at the top of the POD Farm 2 window, and includes a number
of global controls and “View” buttons. The controls are the same here as described in the Plug-In
chapter’s “1 - Main Control Bar” on page 3•4, with the exception of the Input & Output controls,
described as follows.
Input Meter Master Output Control
The Main Control Bar
Input Meter - The meter provides peak display with clip indicators to measure the level of your
selected Source Input(s).
You’ll see a Mono or Stereo meter here, depending on if you’ve selected either one or two Input
Sources for Tone A & B (see “Mixer View” on page 4•5).
The “colorized” stereo level meters provide the following input level information:
The green to yellow range of the meters indicates up to -18 dB (instrument level).
The yellow range of the meters indicates from -18 dB to 0 dB (full scale).
The red “clip indicators” light up if the input exceeds 0 dB. Clipping should always be
avoided!
*Important! Setting your input levels before they are fed into POD Farm 2 is critical for optimizing your
audio signal quality. Here are some helpful tips concerning Input levels:
• Some POD Farm 2 models are calibrated to receive an “instrument level” audio signal (-18 dB).
Therefore, when any of these models exist in your Tone path, use your instrument or input
device’s volume or gain controls to optimize the input level coming into POD Farm 2 so that
the Input meters remain in the higher end of the green range. These “instrument level” models
include all those in the following categories:
• Guitar Amps
• Bass Amps
• Distortions
• Filters
• Dynamics (excluding the “Compressor “ model, which receives up to full scale input)
• When your Tone path does not include any of the above instrument level models, then the Input
level can be as high as full scale.
Master Output Control - Use the knob and meter here to optimize the POD Farm 2 Tone A & B
monitor output level.
TIP: The Master Output knob & meter control only the ToneDirect Monitoring output of POD Farm 2
(the signal you hear from your Line 6 hardware Main & Headphone outputs). Use the Mixer View’s Record
Send faders (see page 4•6) to independently control the levels fed to your DAW software for recording!
If you have a Dual Tone signal path, this controls the total mix of Tones A & B.
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Line 6 POD Farm 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Line 6 POD Farm 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Line 6 POD Farm 2

Line 6 POD Farm 2 Gebruiksaanwijzing - Nederlands - 82 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info