765129
4
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owners manual for
future reference.
SP-460 OWNER’S MANUAL
2
SP-460
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. EXPLODED DIAGRAM 5
3. PARTS LIST 6
4. ASSEMBLY INSTRUCTION 8
5. ADJUSTMENT INSTRUCTIONS 12
6. COMPUTER OPERATION 13
7. EXERCISE GUIDE 19
8. WARRANTY 21
3
SP-460
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to
regularly maintain your machine may void your warranty.
Please keep this manual with you at all times
a. It is important to read this entire manual before assembling and using the equipment. Safe and effective
use can only be achieved if the equipment is assembled, maintained and used properly.
Please note: It is your responsibility to ensure that all users of the equipment are informed of all
warnings and precautions.
b. Before starting any exercise program you should consult your doctor to determine if you have any
medical or physical conditions that could put your health and safety at risk, or prevent you from using
the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your
heart rate, blood pressure or cholesterol level.
c. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these symptoms, you should consult your doctor before continuing with your exercise
program.
d. Keep children and pets away from the equipment. This equipment is designed for adult use only.
e. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 0.5 meters of free space all around it.
f. Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any
unusual noises coming from the equipment during use and assemble, stop immediately. Do not use the
equipment until the problem has been rectified.
4
SP-460
g. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in
the equipment or that may restrict or prevent movement.
h. This equipment is designed for indoor and family use only.
i. Care must be taken when lifting or moving the equipment so as not to injure your back.
j. Always keep this instruction manual and assembly tools at hand for quick reference.
k. The equipment is not suitable for therapeutic use.
l. There are many functions of the computer, which value will show when using the equipment according
the amount of exercise, here warmly remind you that the value of heart pulse just give you some
reference.
CARE INSTRUCTIONS
c. Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects
d. The machine can be kept clean by wiping it down using dry cloth
Battery Usage
a. Batteries are to be installed or replaced by adult only
b. Do not use rechargeable batteries. Do not mix different battery types. Do not mix old and new
batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium) batteries
c. Remove batteries when product is not in use
d. Remove exhausted batteries from product and dispose of in accordance with the manufacturer’s
recommendation
e. Do not attempt to recharge non-rechargeable batteries
f. Batteries are to be inserted with correct polarity
g. The supply terminals are not to be short-circuited
IMPORTANT
a. All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and
other moving parts. Failure to do so may cause damage to your threads and void your
warranty.
b. Lubricate moving joints after periods of usage
5
SP-460
3. EXPLODED DIAGRAM
6
SP-460
3. PARTS LIST
NO NAME
QUANTITY SPEC
1PEDAL 1JD-3019/16"
2END CAP1 560*30*1.5
3CARRIAGE BOLT 4GB/T 12-1988 M8*42
4REAR STABILIZER 1WELDING
5FLAT WASHER 4
GB/T 95-2002 8
6DOMED NUT 4GB/T 802-1988 M8
(H=16mm)
7SPRING ADJUSTMENT KNOB 3φ57*62 (M16*1.5)
8PLASTIC SLEEVE 353.5*23.5*1.5
9LOCK NUT 2M33*1*4
10 VERTICAL SEAT POST 1WELDING
11 END CAP2 153.5*23.5*1.5
12 SEAT POST 1WELDING
13 SEAT 1DD-2681
14 STOPPER 4φ32*37/(M8X25)
15 FRONT STABILIZER 1WELDING
16 MAIN FRAME 1WELDING
17 HANDLEBAR POST 1WELDING
18 HANDLE BAR 1WELDING
19 SPRING WASHER 4GB/T 859-1987 8
20 BOLT 8GB/T 70.2-2000 M8*15
21 HANDLEBAR COVER 1115*89*75 (60g)
22 B0TTLE HOLDER 1117*85*90
23 B0TTLE 1XS-003(1#) 500ML
24 BRAKE KNOB 1112*32*7
25 ADJUSTMENT KNOB 1φ38*79
26 LITTLE PLASTIC RING 114*8*9
27 PLASTIC RING 2φ20*φ9*3
28 FIXING NUT 1 2
GB/T 6177.2-2000 M10*1.25
29 CRANK END CAP 2φ23*7.5
30 SHEET IRON 1δ5
31 LOCK NUT 7GB/T 889.1-2000 M8
32 CHAIN WHEEL 1A7K-16 1/2"*1/8" 16T1.37"
33 LEFT CRANK 1170*27
34 CRANK COVER 1φ56*28
35 BEARING 26004ZZ
36 RIGHT CRANK 1170*27
37 RIGHT PROTECT COVER 1156*80*174 (85g)
38 FIXING NUT 2 2
GB/T 802-1988 M12X1.25
(H=16mm)
7
SP-460
NO NAME
QUANTITY SPEC
39 FIXING BOLT 2M6*54
40 NUT 2GB/T 889.1-2000 M6
41 SCREW 1 15 GB/T 845-1985 ST4.2*19
42 SCREW 2 2GB/T 15856.1-2002 ST4.2X19
43 SCREW 3 2
GB/845-85 ST4.8X13
44 OUTER CHAIN COVER 1714*301*60
45 LITTLE CHAIN COVER 1108*37*3 (7g)
46 AXIS 1φ20*162
47 LONG FIXING TUBE 1φ25*φ20.5*41
48 SHORT FIXING TUBE 1φ25*φ20.5*9
49 INNER CHAIN COVER 1454*288*6
50 CHAIN 112.7106
51 CHAIN WHEEL 1P=12.7,Z=52T
52 BRAKE 12PCS 130mm
53 BOLT 1
GB/T 70.1-2000 M6*20
54 BRAKE PLASTIC 282*41*19
55 BOLT 2
GB/T 5780-2000 M8*40
56 WHEEL 2φ50*23
57 NUT 4
GB/T 41-2000 M8
58 FIXING NUT 2 2M12X1.25 H=6
59 FIXING TUBE 1φ16*φ12.1*35
60 BEARING 26001ZZ
61 FLYWHEEL 1φ453*72(18KG)
62 FLYWHEEL SHAFT 1φ12*160
63 WOOLLY BLOCK 278*38*6
64 COMPUTER HOLDER 1WELDING
65 COMPUTER 1
ST-6527(ST-7607)
66 FIXING NUT 227*M20*15mm
67 FLYWHEEL COVER 1φ59*35
68 SCREW 4 1 ST2.9*9.5
69 LEFT PROTECT COVER 1157*73*157 (85g)
70 END CAP 2φ25*1.5
71 FOAM GRIP 2φ23*φ29*465
72 SENSOR 1SR-202
73 PULSE WIRE 1L=800
74 PULSE 2
75 SCREW 5 2
GB/845-85 ST4.2X25
8
SP-460
4. ASSEMBLY INSTRUCTIONS
STEP 1: PREPARATION
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this instruction
sheet you will find an explosion drawing with all single parts (marked with numbers) which this item
consists of.
STEP 2:
1. Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of
Ø8 Flat Washers (pt.5), M8 Domed Nut
(pt.6) and M8*45 Carriage bolt (3).
2. Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of
Ø8 Flat Washers (pt.5), M8 Domed Nut
(pt.6) and M8*45 Carriage bolt (3).
9
SP-460
STEP 3:
the seat post housing on the main frame
(pt.16).
2. Slide the Seat Post (pt.12) into the
Vertical Seat Post (pt.10). You will have
to loosen the knurled section of Spring
Adjustment knob (pt.7) and pull the knob
back and then select the desired height.
Release the knob and retighten the
knurled portion.
3. Now fix the Seat (pt.13) to the Seat
Post (pt.12) as shown, and tighten the
bolts around the screws under the seat.
10
SP-460
STEP 4:
1. Slide the Handlebar Post (pt.17) into
the handlebar post housing on the
main frame. You will have to loosen the
knurled section of the Spring
Adjustment Knob (pt.7) and pull the
knob back and then select the desired
height. Release the knob and retighten
the knurled portion.
2. Remove the bolts and spring washer
from the Handlebar Post (pt.17).
3. Attach the Handlebar (pt.18) with 4xØ8
the Spring Washer (pt.19) and M8*15
Bolts (pt.20).
PLEASE ENSURE THE HANDLEBAR IS FIXED
TIGHTLY
4. Attach the Computer (pt.65) onto the
Computer Holder (pt.64) using 4 bolts
(pt.53). Be sure to connect the plug (A1
& A2)
11
SP-460
STEP 5:
1. The Pedals (pt.1 L & pt.1 R) are marked
"L" and "R" - Left and Right.
Connect them to their appropriate crank
arms. The right crank arm is on the
right- hand side of the cycle as you sit
on it.
Note that the Right pedal should be threaded on
clockwise and the Left pedal anticlockwise.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lifespan SP-460 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lifespan SP-460 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info