765122
35
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
Treadmill/Bike Desks: DT-3/DT-5/DT-7
Version 5.1
OWNERS MANUAL
3
Table of Contents
Welcome
Warranty
Maintenance & Tips
DT-5 Desk
Assembly Instructions
Desk Leveling and Height Adjustment
DT-7 Desk
Assembly Instructions
Desk Leveling and Height Adjustment
DT-5 Manual Treadmill Desk Assembly
DT-7 Electric Treadmill Desk Assembly
DT-3 Console Assembly
4
5
8
Getting Started
Desk Assembly
Specications
Console Overview
Innovative Features
Troubleshooting
Personal Settings
Bike Desk Operations
Treadmill Desk Operations
Specications
Console Overview
Innovative Features
Troubleshooting
Personal Settings
12
17
18
23
24
25
26
28
30
32
34
36
40
42
43
44
46
4
Welcome
Congratulations on choosing the LifeSpan Workplace line of
products. These products give you the opportunity to remain
productive while taking care of yourself as you integrate movement
with normally sedentary tasks.
The average American now spends eleven hours, ve days a week,
sitting, and burns one-hundred fewer calories each day than they did
a few decades ago. Sitting for long periods slows your metabolism,
reduces calories burned, and increases your risk for heart disease and
diabetes.
Whether you plan on placing this product in a TV room, replace
your desk at home or are adding another workspace in the oce,
the LifeSpan Workplace Solutions products are a great way to add
movement to an otherwise sedentary activity.
Before you assemble or operate your product, please read this manual
thoroughly. Important information, including safety precautions,
ongoing product maintenance, assembly instructions, and information
on proper operation are included.
If you need to contact LifeSpan customer service, visit our website at
www.LifeSpanFitness.com and select customer service. Complete the
information requested and we will respond to your inquiry within one
business day. In the United States and Canada you can also call
(877) 654-3837 and choose option 4.
Remember that some types of services should only be performed by a
qualied service technician.
Neither LifeSpan Fitness nor its representatives can accept
responsibility for any damages or injury incurred as a result of
information presented in this manual except under the terms of the
product warranty.
5
The LifeSpan Workplace Solutions products come with the following
warranties, valid in the United States and Canada only.
LifeSpan Fitness warrants that the equipment it manufactures is free
from defects in material workmanship under normal use and service.
The periods above are based on the date of purchase. During these
periods, LifeSpan Fitness will repair or replace any defective part. Free
labor is included for the rst year on all parts that are not normally
assembled or replaced by the customer. Customer may be responsible
to pay for the service technicians travel time, where travel time exceeds
twenty miles (thirty-two kilometers).
If within the time frames specied above, any part fails to operate
properly, log on to our web site at www.LifeSpanFitness.com, click on
the customer service link and complete the form to request assistance.
To speak with a customer service agent, call (877) 654-3837 option 4.
LifeSpan reserves the right to make changes and improvements to our
products without incurring any obligations to similarly alter any product
purchased. In order to honor our product warranty and to ensure the
safe and ecient operation of your LifeSpan product, only authorized
parts can be used. The warranty is void if any parts other than those
provided by LifeSpan Fitness are used.
Warranty
Warranty Desk DT-3 DT-5 DT-7
Frame NA Lifetime Lifetime
Parts 2 Year 2 Years 2 Years
Replacement
Labor NA 1 Year 1 Year
Warranty Treadmill TR800B TR1200B TR5000B
Treadmill Frame NA Lifetime Lifetime
Motor 3 Years 3 Years 3 Years
Parts 1 Year 2 Years 2 Years
Labor 1 Year 1 Year 1 Year
6
Exclusions and Limitations:
This warranty does not apply to any defects caused by
negligence, misuse, improper assembly or maintenance, accident,
or an act of god”.
This warranty does not apply to discoloration of paint or plastics.
LifeSpan shall not be responsible for incidental or consequential
damages.
This warranty is nontransferable from original owner.
Registration (U.S. and Canada Only)
You must register your LifeSpan product before a warranty claim can be
processed. To complete your registration online, go to
www.LifeSpanFitness.com and click on product registration or ll out
the warranty card provided and mail today. Registration cards must
be completed and sent to LifeSpan within thirty days of purchase to
activate the product warranty. Product warranties are not valid unless
the registration is properly completed and received within thirty days.
Warranty
U.S. and Canada
785 West 1700 South Suite 1
Salt Lake City, UT. 84104
Phone: (877) 654-3837
www.LifeSpanFitness.com
International
Contact your local
distributor
8
Daily Cleaning
It is recommended to wipe the treadmill down after each use to keep the
treadmill clean and dry. A mild detergent may be used at times to help
remove all dirt and salt from the belt, painted parts and the display.
Monthly Cleaning
This cleaning includes removing the motor cover and cleaning around
the motor and electronics. It is recommended to clean the motor
compartment if the treadmill is in an area where there might be plush
carpet bers that could get pulled up into the motor compartment. It
is a good idea at this time to tighten all assembly hardware and check
power cord for damage, or anything else that would indicate the need
for service.
Safety and Integrity
The safety and integrity designed into the machine can only be
maintained when the treadmill is regularly examined for damage and
repaired. Worn or damaged components shall be replaced immediately
or the treadmill be removed from service until the repair is made. Pay
special attention to components most susceptible to wear.
!
WARNING: Keep treadmill stable on at ground.
WARNING: Unplug the power cord before removing the motor cover.
IMPORTANT: If service is required, turn the power o and remove the
power cord to ensure the unit cannot be used. Let all other users know the
treadmill needs service.
CAUTION: Acidic cleaning detergents may damage painted or powder
coated surfaces and should not be used. Such cleaners may void the
LifeSpan warranty.
!
Maintenance and Tips
9
Maintenance and Tips
Belt Lubrication
Use only 100% silicone and avoid using aerosol silicone sprays which
include additives and petroleum distillates. One ounce of silicone
should be used for each application. LifeSpan oers 100% silicone
lubricant that can be ordered at www.LifeSpanFitness.com.
The walking belt comes pre-lubricated from the factory. The TR800B
and TR1200B should be lubricated every 50 hours of use. The TR5000B
comes with a maintenance free belt and doesn’t require lubrication.
To lubricate, unplug your treadmill. Slide your hand under the belt and
lift the belt away from the deck. Apply about a dozen sprays toward
the center of the belt from each side. Rotate the belt 1/3 and repeat
this application. Rotate another 1/3 and repeat once more. Plug the
treadmill in and walk for a few minutes to disperse lube evenly.
NOTE: When lubricating the belt, make sure the treadmill
is on a surface that can be easily cleaned. After lubricating
clean any excess silicone o the walking surface of the belt
and side rails.
For a full video
demonstration
on lubricating your
treadmill go to
www.lifespantness.
com/how-to-
lubricate-your-
treadmill-belt.
10
Belt Tensioning
If the belt begins to slip and needs to be tensioned, tension bolts are
accessible from the back of the treadmill. Before tensioning the belt,
start the treadmill and set the speed to 3 mph (5 kph).
A. Using a 6 mm Allen wrench, included in your hardware bag, turn
the right and left tension bolts 1/2 turn clockwise.
B. Test to see if the slipping is eliminated. If the belt slips repeat step A
and test again.
Note: Adjusting one side more than the other will cause the belt
to drift to the side of the treadmill and will require belt alignment.
Check to be sure the running belt is still aligned. If belt alignment is
o as shown below, refer to Belt Alignment section.
CAUTION: DO NOT tighten more than 2 full turns on each side.
Over tensioning the belt can cause unnecessary friction and wear and
tear on the belt, motor and electronics.
Belt Alignment
A. Press Start, then increase the treadmill speed to 3 mph (5 kph).
B. Stand behind the treadmill to see which way the belt is drifting.
C. If the belt drifts to the left, turn the left adjustment bolt 1/4 turn
clockwise and the right adjustment bolt 1/4 turn counter-clockwise.
(See FIG. 1)
D. If the belt drifts to the right, turn the left adjustment bolt 1/4 turn
counter-clockwise and the right adjustment bolt 1/4 turn clockwise.
(See FIG. 2)
Maintenance and Tips
Turn both
Clockwise
to Tighten belt
Turn both
Counter-clockwise
to Loosen belt
11
Belt Alignment (continued)
E. Observe the alignment for two minutes. Repeat steps A-D as
needed.
Visit www.LifeSpanFitness.com for a full video demonstration on the
aligning your treadmill belt.
Moving the Treadmill Base
1. Make sure the ON/OFF switch is turned OFF and the power cord is
unplugged from the wall.
2. Make sure nothing is on or near your treadmill which might spill, be
knocked o, or prevent the treadmill from moving.
3. Place both hands under the support bar located under the back of
the walking belt to make sure you have a solid lifting point.
4. Lift the back of the treadmill and roll to the desired location.
Maintenance and Tips
To move belt to the Right
Figure 1
To move belt to the Left
Figure 2
CAUTION: When lifting, use proper safety
precautions and lifting techniques. Bend
your knees and elbows, keep your back
straight and lift evenly
with both arms.
12
DT-5 Desk: Assembly Instructions
4
3
6
12
A
1
8
7
9
B
C
10
5
2
11
13
Item Number Description
1
2
3
4
5
6
7
8
9
10
11
12
A
B
C
D
E
F
Lift Frame
Desktop
Left Base Foot
Right Base Foot
M10 Washer (Pre-installed)
M10 Acorn Nut (Pre-installed)
Height Adjustment Knob
LifeSpan Placard (Pre-installed)
M8*45L Bolt (Pre-installed)
M8 Nuts (Pre-installed)
Wire Cover
M10 Washer (Pre-installed)
Desk Position Bumpers
Extension Tube
Desktop Mounting Bracket
Stop Bumper
Bike Safety Key
Treadmill Safety Key
At LifeSpan we strive to make our equipment easy to assemble and start
using. Parts that can be pre-assembled are always assembled and tested
on the product line.
Prior to starting the assembly process, take all the parts out of the box,
remove plastic bags and lay everything out on the oor to become
familiar with the components.
Since your desk is a heavy piece of equipment, it is recommended
that you use two people during assembly and follow these assembly
instructions to reduce any problems that may occur.
Included Hardware
Wrench-17mm
Table corresponds to the diagram on the left
DT-5 Desk: Assembly Instructions
14
DT-5 Desk: Assembly Instructions
Step 1: Lift Frame Assembly
A. Position the lift frame (1), left
base foot (3) and right base
foot (4) as shown in the gure
to the right. Note the position
of the Workplace logo as well
as the right and left base feet.
B. Place the lift frame onto the left
and right base feet mounting
bolts and install the M10
washer (5) and M10 acorn
nut (6).
C. Tighten the four mounting
nuts.
Step 2: Install the Height Adjustment Knobs
A. Locate the height adjustment
knobs (7).
B. Screw the height adjustment
knobs into the lift frame (1)
uprights as shown in the gure
to the right.
C. Raise each extension tube (B)
to level 15 and tighten the
height adjustment knobs (7).
1
3
4
Workplace
Logo
Desk
positioning
bumpers
facing
inward
A
7
1
65
B
15
Step 3: Desktop Assembly
A. Make sure the extension tube (B) is at level 15 (done in step 2C).
B. Align the desktop on top of the extension tubes (B) so the wire
harness from the desktop frame is on the same side as the wire
harness coming from the right extension tube. Gently lower the
desktop support frame onto the desktop mounting bracket (C).
NOTE: Make sure the console wire harness or connector does not get
caught or pinched between the mounting bracket and desktop frame.
DT-5 Desk: Assembly Instructions
C. Insert four M8*45L carriage bolts (9) through the mounting brackets.
Install four M8 washers (5) and nuts (10). Securely tighten the four
M8 nuts.
D. Connect the two wire harness connectors.
NOTE: If the desktop tilts up and down slightly, re-tighten the four
bolts/nuts inserted in step 3C.
Step 3C Step 3D
Step 3C
9
10 5
B
C
16
DT-5 Desk: Assembly Instructions
Step 4: Attach the Wire Cover to the Right Extension Tube
A. Simply snap the cover (11) over the right extension tube (B). The
bottom of the cover will be resting on top of the stop bumper (D).
Safety Key
When using the DT-5 with a treadmill use safety key (F). When using the
DT-5 with a bike please use safety key (E).
B
E
11
D
F
17
Desk Leveling
The desk needs to be leveled prior
to use. The desk comes with two
adjustable feet that can be used
to level the desk and eliminate
rocking. If the desk is rocking on
two of the feet, adjust the two front
feet until all four feet are sitting
securely on the oor.
Desk Adjustment Feet
Desk Height Adjustment
CAUTION: Remove all objects from the desktop prior to making
height adjustments. We recommend using two people for the
height adjustment.
!
A. Loosen the adjustment knobs
(A) on each upright by turning it
no more than two turns counter-
clockwise.
B. While rmly holding each side of
the desktop, pull both adjustment
knobs out and slowly raise or
lower the desktop.
C. Release the adjustment knob as
the desired level is reached. The
adjustment knob will click into
place.
D. Check to make sure the desk
height is set at the same level on
both sides. Turn the adjustment
knobs clockwise to lock in place.
DT-5 Desk: Desk Leveling and Height Adjustment
18
DT-7 Desk: Assembly Instructions
2
B
1
6
11
3
4
10
C
9
A
7
5
5
8
19
Item Number Description
1
2
3
4
5
6
7
8
9
10
11
12
A
B
C
D
E
Lift Frame
Desktop
Left Base Foot
Right Base Foot
M8 Washer (Pre-installed)
M10 Acorn Nut (Pre-installed)
M8*45L Bolt (Pre-installed)
M8 Lock Nut (Pre-installed)
M8*15 Bolt (Pre-installed)
Accessory Tray
M10 Washer (Pre-installed)
LifeSpan Placard
Desk Position Bumper
Extension Tube
Desktop Mounting Bracket
Treadmill Safety Key
Bike Safety Key
At Lifespan we strive to make our equipment easy to assemble and start
using. Parts that can be pre-assembled are always assembled and tested
on the product line.
Prior to starting the assembly process, take all the parts out of the box,
remove plastic bags and lay everything out on the oor to become
familiar with the components.
Since your desk is a heavy piece of equipment, it is recommended
that you use two people during assembly and follow these assembly
instructions to reduce any problems that may occur.
Included Hardware
Wrench-5mm
Wrench-17mm
Table corresponds to the diagram on the left
DT-7 Desk: Assembly Instructions
21
Step 3: Desktop Assembly
NOTE: It is a good idea to use two people for this portion of the
assembly in order to be sure wires are properly routed and do not get
pinched while installing the desktop.
A. Remove the bolts (7),
washers (5), and nuts
(8) pre-installed in the
upright assembly posts.
B. Hold the desktop (2)
over the lift frame (1)
and place the desk
height control wire
harness (15) and the
console wire harness
(14) into the center of
the lift frame (1). Place
the connector ends
towards the center of
the tray for easy access
in the next steps of the
assembly.
C. Set the desktop down
into the mounting brackets (C) on the extension tubes, align the
mounting holes and re-install the hardware removed in step A.
D. Tighten the desktop mounting bolts/nuts.
DT-7 Desk: Assembly Instructions
214
15
C
C
1
85
7
22
Step 4: Height Adjustment/Console Harness Connections
A. Remove the two upper
screws (13) attaching the
access panel for the height
adjustment control unit.
B. Tilt down and pull
the access panel out
several inches. There are
harnesses pre-installed to
the height controller, so
do not try to fully remove.
C. Attach the round
connector (15) (placed
in the center tray during
desktop assembly) to the
height controller port (16).
D. Connect the 7-pin
rectangular connectors
(14) (one is placed in the
center tray during desktop
assembly and the other
is pre-installed at the
factory).
E. Re-attach the access panel
to the center tray and
tighten the two screws
removed in step A.
F. Plug the power cord into
the receptacle (19).
NOTE: Check to be sure all wires are carefully tucked into the center tray
prior to tightening access panel screws to prevent harness damage.
DT-7 Desk: Assembly Instructions
13
Do Not
Remove Screws
14
16
15
19
23
Desk Leveling
The desk needs to be leveled prior
to use. The desk comes with two
adjustable feet that can be used
to level the desk and eliminate
rocking. If the desk is rocking on
two of the feet, adjust the two
front feet until all four feet are
sitting securely on the oor.
Desk Height Adjustment
A. To raise the desk, press the up
or down arrow until the desk
is at the desired height.
B. To save a height press and
hold the memory preset,
one or two, button for three
seconds. This will save the
current height into memory.
C. The next time the desk
is used, simply press the
memory preset to adjust the desk height to the previously saved
setting.
DT-7 Desk: Desk Leveling and Height Adjustment
Desk Adjustment Feet
Desk
Height
Memory
Pre-Sets
Safety Key
When using the DT-7 with a
treadmill use safety key (D).
When using the DT-7 with a
bike please use safety key (E).
E
D
24
DT-5 Manual Treadmill Desk: Assembly Instructions
Treadmill to DT-5 Desk Assembly
A. Position the pre-assembled treadmill as shown below.
B. Lift the rear of the treadmill and roll it forward under the desk until
the positioning bumpers (F) located on the treadmill are centered
over the treadmill position bumper (A) at the base of the uprights.
Lift
Roll Forward
C. Plug the console connector from the desk into the treadmill console
port and tighten the thumb screws on the connector.
D. Plug the power cord into the treadmill power receptacle and turn
the power switch on. Be sure all connectors are plugged in prior to
connecting the power cord.
E. Install the safety key into the front of the console.
Power Switch
Power Receptacle
Console Port
F
F
A
Console Connector
25
Treadmill to DT-7 Desk Assembly
A. Position the pre-assembled treadmill as shown below.
B. Lift the rear of the treadmill and roll it forward under the desk until
the treadmill positioning bumper (F) located on the treadmill are
centered over the desktop positioning bumper (A) at the base of the
uprights.
C. Plug the console electronics
cable into the desk
D-connector and treadmill
console port and tighten the
thumb screws.
D. Plug the power cord into the
desk power receptacle and
into a wall outlet.
E. Plug the power cord into the
treadmill power receptacle
and wall outlet.
F. Turn the treadmill power
switch on and install the
safety key into the front of
the console.
Lift
Roll Forward
DT-7 Electric Treadmill Desk: Assembly Instructions
F
F
A
Power Switch
Power Receptacle
Console Port
Desk Power Receptacle
D-Connector
Console
Connector
NOTE: Be sure all connectors
are plugged in prior to
connecting the power cord.
Treadmill Connections
Desk Connections
26
DT-3 Console: Assembly Instructions
on/o switch
power receptacle
console port
After assembling the bike or treadmill, roll it to the desired location.
Plug the console connector into the connector coming from the front
of the treadmill or the bottom of the bike. Be sure to screw the two
connectors together with the attached thumb screws.
NOTE:
Do not plug the power cord into the equipment until the console is connected.
Time
Step/Level
Calories
Distance
Speed
Weight
NOTE:
All desk and DT-3 connectors plug into the bike D-connector the same way.
Time
Step/Level
Calories
Distance
Speed
Weight
Safety Key
When using the DT-3 with a treadmill use
safety key (D). When using the DT-3 with
a bike please use safety key (E).
D E
27
TREADMILL DESK
OPERATIONS
28
Treadmill Desk Specications
Console
Readouts
Display
Bluetooth
DT-3
Time, Steps, Calories, Distance,
Speed
LED
Yes
Mechanics and Performance
Speed Range
Dimensions
Height Adjustment
User Height Range
Height Adjustment Method
Desktop Material
Desktop Surface
Maximum Load on Desktop
Desk Lift Speed
Desk Height Memory
DT-3
0.4 - 4.0 mph
0.6 - 6.4 kph
12.5” W x 3” D x 2” H
32 cm W x 7.6 cm D x 5.1 cm H
NA
NA
NA
NA
NA
NA
NA
NA
29
DT-5
Time, Steps, Calories, Distance,
Speed
LED
Yes
DT-7
Time, Steps, Calories, Distance,
Speed
LED
Yes
DT-5
0.4 - 4.0 mph
0.6 - 6.4 kph
46.75” W x 36.5” D
116.875 cm W x 91.25 cm D
41” to 55”
104 cm to 140 cm
4’10” to 6’8”
147 cm to 203 cm
Manual
1” (2.54 cm) thick HD
Composite Board
Durable Laminate
180 lbs
82 kg
NA
NA
DT-7
0.4 - 4.0 mph
0.6 - 6.4 kph
46.75” W x 36.5” D
116.875 cm W x 91.25 cm D
40” to 53”
101.6 cm to 134.6 cm
4’10” to 6’8”
147 cm to 203 cm
Electric
1” (2.54 cm) thick HD
Composite Board
Durable Laminate
180 lbs
82 kg
38 mm/second
2 Pre-Sets
Treadmill Desk Specications
30
Treadmill Desk Console Overview
Starting the Treadmill Desk
1. Turn the On/O switch located on the front right corner of the
treadmill to the on position.
2. Make sure the safety key is installed on the console.
3. The current user weight will be ashing on the display panel. Adjust
your weight to obtain accurate calorie calculations.
4. Press the Start button to begin your workout. The console will start
counting up from 00:00.
5. Press the Up/Down buttons to adjust speed.
NOTE: The display will show “----“ if the safety key is not installed.
NOTE: The steps are counted normally from 1 to 9,999 steps. After
9,999 steps, the display format changes to accommodate more than
four digits. Take the number shown in the display and add a zero to
the right for the correct number of steps.
Below are examples of what the display will read and what those
numbers mean:
1001 = 10,010 steps 1005 = 10,050 steps 1100 = 11,000 steps
31
Console Buttons
1. Start/On – If the console is in sleep mode, press and hold this button
for three seconds to turn the console on. Once the console is turned
on, press to start the treadmill.
2. Enter/Mode – Press to switch between display readings (time, steps,
calories, distance, and speed). Holding the Enter/Mode button will
initiate a scan mode that rotates between display readouts every
ve seconds. Press the button again to exit the scan mode.
3. Stop/Pause – Press to pause your workout. This will maintain your
current workout data. To reset the console and current workout data,
press and hold the Stop/Pause button for three seconds.
4. – Press to adjust your weight during setup mode or to change
the treadmill speed during a workout.
5. Bluetooth – Press to turn on Bluetooth to pair with a personal
computer.
Treadmill Desk Console Overview
DT-5 and DT-7
DT-3
NOTE: Not all personal computers have a Bluetooth module. A
Bluetooth adaptor can be purchased to work with your personal
computer.
5
5
1
1
2
2
34
4
3
32
Treadmill Desk Innovative Features
Intelli-GuardTMThis treadmill desk is equipped with our patented
Intelli-Guard feature. This feature senses when you stop walking on
the treadmill and for safety purposes, it automatically pauses the
treadmill to avoid accidental falls which may result in injury. The Intelli-
Guard feature is triggered when the treadmill senses you are no longer
walking.
CAUTION: The Intelli-Guard feature will automatically be
disengaged when the treadmill desk is operated at speeds under
1.0 mph (1.6 kph). If the speed is within these parameters, the step
count will ash. When the display for the step count ashes, the
treadmill desk will no longer auto-pause.
CAUTION: At twenty seconds, the console will beep once per
second for ve seconds and then automatically pause the
treadmill desk. These beeps are a caution that the treadmill belt
is about to stop. If for some reason you are still on the treadmill
desk when this occurs, move your feet to the side rails and prepare
for the belt to stop. The Intelli-Guard feature does not replace the
use of your safety key or taking proper precaution in stopping the
treadmill desk when it is not in use.
!
!
Intelli-StepTMThis treadmill desk comes with our patented Intelli-Step
counting feature. This feature senses the resistance on the walking belt
each time your foot strikes. There are several factors that will aect the
accuracy of this feature including your walking style, your weight, and
your usage characteristics. For example, the Intelli-Step feature will have
a dicult time picking up the steps of a light user
(under 110 lbs/50 kg) or at speeds lower than 1 mph (1.6 kph).
33
Treadmill Desk Innovative Features
Audible Safety Alert – This treadmill desk has an audible alert to notify
the user when the treadmill desk is starting as well as when the speed is
being adjusted.
The alert may be distracting in an oce setting and can be turned o.
Please see the Personal Settings section (page 36) for instructions on
how to do so.
CAUTION: If the audible safety alert is turned o, the alert for the
Intelli-Guard feature will also be disabled.
!
BluetoothThe Workplace Solutions series consoles include a Bluetooth
module to support LifeSpan apps. All apps can be downloaded from
the LifeSpan Fitness Club. Apps show real time results for steps, calories,
distance, and time on your computer.
Charging Port (DT-3 Only)This port can be used to charge your
wireless mobile devices.
NOTE: You will not be able to save your workout data to a USB via
this port; it is used for charging purposes only.
34
Treadmill Desk Troubleshooting
Problem
Solution
Problem
Solution
Problem
Solution
Problem
Solution
Problem
Solution
Only the weight LED is dimly lit. Pressing the start button will
make the screen ash.
The treadmill desk is in sleep mode. Press and hold the On/Start
button for three seconds to power on the unit.
The console is erratic or not lighting up.
Check to make sure the treadmill desk is properly plugged in.
Turn the power switch o and back on again and make sure the
safety key is in place. Make sure the connectors located in the
front of the treadmill and under the desktop are fully plugged
in. If the problem persists contact LifeSpan customer service.
The treadmill motor seems strained or E1 comes up after several
minutes of use.
The silicone lubricant that is applied to the deck and belt is
wearing down and the belt needs to be lubricated with 100%
silicone spray (non-aerosol).
The treadmill automatically pauses during a workout.
The treadmill is not picking up the step count. Go into the
Personal Settings section (page 32) to turn the Intelli-Guard
feature o.
The treadmill speed doesn’t feel right (either too fast or too
slow).
Go into the Personal Settings section (page 36) and check if you
are in Metric or English mode. If you are in the correct mode,
contact LifeSpan customer service.
The LifeSpan Treadmill Desk is designed and manufactured to be
reliable and easy to use. However, if you have a problem, these
troubleshooting steps may help you nd the cause.
35
Problem
Solution
Problem
Solution
Problem
Solution
Problem
Solution
Problem
Solution
“Uart appears in the display.
Turn the treadmill desk power switch o. For DT5 desks unplug
and re-plug the connections made in step 3D during assembly,
and on page 24 steps C, D and E. DT7 desks unplug and re-plug
the connections made in step 4C and 4D during assembly and
on page 25 steps C, D and E. Make sure the thumb screws are
properly tightened. Turn the treadmill desk power back on and
check to see if it functions properly.
dc-6” appears in the display.
Turn the treadmill desk power switch o. For DT5 desks unplug
and re-plug the connections made in step 3D during assembly,
and on page 24 steps C, D and E. DT7 desks unplug and re-plug
the connections made in step 4C and 4D during assembly and
on page 25 steps C, D and E. Make sure the thumb screws are
properly tightened. Turn the treadmill desk power back on and
check to see if it functions properly.
The console isn’t connecting to personal computer via Bluetooth.
Log into your LifeSpan Fitness Club account. Click on the
Frequently Asked Questions link located at the bottom of
the homepage. If further assistance is needed, please email
coordinator@LifeSpanFitness.com.
The treadmill desk does not go into sleep/energy saving mode.
In order for the unit to go into sleep/energy saving mode, press
and hold the stop button for three seconds to reset the console.
After ten minutes the console will go into
sleep/energy saving mode.
The desktop surface is not level.
Check to make sure the base feet are on a level surface. For
a DT-5, make sure each extension tube is raised to the same
height number as shown on the extension tube. For a DT-7,
run callibration by pressing and holding the height adjustment
buttons similtaneously for three seconds.
Treadmill Desk Troubleshooting
36
Treadmill Desk Personal Settings
To enter Personal Settings mode, press and hold the Stop/Pause button
simultaneously with the button. After three seconds, F001 should
show in the display.
1. To change between English and Metric mode, press the button
until F014 shows in the display. Press enter and either EN or SI
will then appear in the display. To change to EN (miles) press the
button. To change to SI (kilometers) press the button. Press enter
and remove and re-install the safety key.
2. To turn the Intelli-Guard feature on or o, press the button until
F012 shows up in the display. Press enter so on/o appears in the
display. Press the button to turn Intelli-Guard o, or press the
button to turn Intelli-Guard on. Press enter and remove and re-install
the safety key.
3. To turn the Audible Alert on or o, press the button until F015
shows in the display. Press enter so on/o appears in the display.
Press the button to turn the audible alert o or press the button
to turn the audible alert on. Press enter and remove and re-install
the safety key.
4. To change the allowable maximum speed from 4 mph (6.4 kph) to
2 mph (3.2 kph), press the button until F018 appears in the display.
Press enter and 4.00 will show by default. Press the button and
2.00 will be displayed. Press enter and remove and re-install the
safety key.
WARNING – The audible alert is turned on from the
manufacturer to warn the user that the treadmill desk is
starting or the speed is changing. Turning this alert o is done
at the sole discretion of the user.
!
37
5. To start the treadmill at the speed it was going prior to pressing the
pause button, press the button until F019 appears in the display.
Press enter and by default the display shows “0”. Press the button
to display a “1” and press enter. Remove and re-install the safety key.
6. To nd the running total distance you have walked, press the or
button until F016 shows in the display. Press enter and the total
distance will be displayed.
7. To nd the total hours the treadmill desk has run, press the or
button until F017 shows in the display. Press enter and the total
hours will be displayed.
Treadmill Desk Personal Settings
NOTE: Depending on the rmware the console has will
determine if all of the options listed above will be available.
LifeSpan reserves the right to make changes and improvements
to our products without incurring any obligations to similarly
alter any product purchased.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lifespan DT-7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lifespan DT-7 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info