552432
11
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
10
2. Seat Post, Seat Cushion, and Seat Sliding Tube Installation
Slide the Seat Post Cover (58) onto the tube of the Main Frame (41). Insert the Seat Post
(11) into the bushing on the tube of the Main Frame (41) and then attach the Round Knob
(63) onto the tube of the Main Frame (41) by turning it in a clockwise direction with the Multi
Hex Tool provided to lock the Seat Post (11) in the suitable position.
Adjusting the seat height:
Turn the Round Knob (63) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (63) and then slide the Seat Post (11) up or down direction to the suitable
position. Lock the Seat Post (11) in place by releasing the Round Knob (63) and sliding the
Seat Post (11) up or down slightly until the Round Knob (63) "pops" down into the locked
position. For added safety, tighten the Round Knob (63) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of seat post cover.
Remove three Ø16xØ8x1.5 Washers (16) and M8 Nylon Nut (42) from underside of the Seat
Cushion (13). Guide bolts on underside of the Seat Cushion (13) through holes on top of
the Seat Sliding Tube (12), attach with three removed Ø16xØ8x1.5 Washers (16) and M8
Nylon Nut (42) and tighten. Remove one Ø16xØ8x1.5 Washer (16) and Seat Adjustment
Knob (14) from underside of the Seat Sliding Tube (12). Guide bolt on underside of the
Seat Sliding Tube (12) through hole on top of the Seat Post (11), attach with one removed
Ø16xØ8x1.5 Washer (16) and Seat Adjustment Knob (14) and tighten.
Adjusting the seat forward or back:
Turn the Seat Adjustment Knob (14) to loosen the Seat Sliding Tube (12). Slide the Seat
Sliding Tube (12) forward or back to desired position and turn Seat Adjustment Knob (14) to
tighten.
NOTE: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
Tool:
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
11
58
63
10
31
14
16
12
13
16
42
41
18
Multi Hex Tool
S10, S13, S17, S19
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LifeGear Advanced - Magnetic Upright Bike 20390 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LifeGear Advanced - Magnetic Upright Bike 20390 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info