552428

LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 Handleiding

22
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
ADVANCED,
2 in 1 ELLIPTICAL TRAINER
ITEM NO.: 93396
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without notice.
2010, Aug.
1
TABLE OF CONTENTS
WARRANTY--------------------------------------------------------------------------------- 1
SAFETY INSTRUCTIONS-------------------------------------------------------------- 2
ADJUSTMENTS--------------------------------------------------------------------------- 3
OPERATING THE COMPUTER------------------------------------------------------- 3
PARTS LIST-------------------------------------------------------------------------------- 6
HARDWARE PACKING LIST----------------------------------------------------------- 8
TOOLS--------------------------------------------------------------------------------------- 9
OVERVIEW DRAWING------------------------------------------------------------------ 10
ASSEMBLY INSTRUCTIONS---------------------------------------------------------- 11
MAINTENANCE--------------------------------------------------------------------------- 18
TROUBLESHOOTING------------------------------------------------------------------- 18
WARM UP AND COOL DOWN ROUTINE------------------------------------------ 19
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing, free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is extended only to the original owner and is not transferable.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
2
SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following safety
instructions when using this equipment: Read all instructions before using this
equipment.
1. Read all the instructions in this manual and do warm up exercises before using this
equipment.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercise of every
position of the body is necessary. Refer to Warm Up and Cool Down Routine page.
After exercise, relaxation of the body is suggested for cool-down.
3. Please make sure all parts are not damaged and fixed well before use. This
equipment should be placed on a flat surface when using. Using a mat or other
covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult an Authorized
Service Representative.
6. Be careful when step on or leave the pedal always hold the handlebars first. Make the
pedal at your side at the lowest position, step on the pedal, and stride over the main
frame then step on the other pedal. When using, please hold the handlebar by hands,
make the pedals running smoothly by push or pull handlebars, then run the equipment
regularly by cooperation of hands and feet. After exercise, please also make one
pedal at the lowest position and leave your foot on the higher pedal first and then
another.
7. Do not use the equipment outdoors.
8. This equipment is for household use only.
9. Only one person should be on the equipment while in use.
10. Keep children and pets away from the equipment while in use. This machine is
designed for adults only. The minimum free space required for safe operation is not
less than two meters.
11. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
12. The maximum weight capacity for this product is 110kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the persons who are over 35 years old or who have
pre-existing health problems. Read all instructions before using any fitness
equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.
3
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a clockwise direction.
To decrease the load, turn the tension control knob in a counterclockwise direction.
Adjusting the Adjustable Leveler
Turn the adjustable leveler on the rear stabilizer as needed to level the elliptical trainer.
Adjusting the Seat Height
Turn the round knob in a counterclockwise direction until it can be pulled out. Pull out the
round knob and then slide the seat post up or down direction to the suitable position. Lock
the seat post in place by releasing the round knob and sliding the seat post up or down
slightly until the round knob "pops" down into the locked position. For added safety, tighten
the round knob in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of plastic bushing.
Adjusting the Seat Forward or Back
Turn the seat adjustment knob to loosen the seat sliding tube. Slide the seat sliding tube
forward or back to desired position and turn seat adjustment knob to tighten.
Note: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME---------------------------------------------------- 0:00-99:59 MIN: SEC
SPEED------------------------------------------------- 0.0-999.9 KM/H
DIST (DISTANCE)----------------------------------- 0.0-999.9 KM
CAL (CALORIES)------------------------------------ 0.0-999.9 KCAL
ODO (ODOMETER)--------------------------------- 0.0-999.9 KM
(PULSE)--------------------------------------------40-240 BEATS/MIN
BUTTON FUNCTIONS:
MODE: Press MODE button to select each function of computer.
Press and hold MODE button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
SET: Press SET button to set data values of TIME, DISTANCE, CALORIES, or Pulse for
target presetting.
4
RESET: Press RESET button to clear data values of TIME, DISTANCE, or CALORIES to
zero.
Press RESET button to clear data values of TIME, DISTANCE, CALORIES, or Pulse to zero
for target presetting.
Press and hold RESET button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNTIONS:
AUTO ON/OFF: When you start to exercise or press any key on the computer, the computer
will turn on. If you leave the equipment for 4 minutes, the power will turn off automatically.
SCAN: Press MODE button until the screen displays a flash SCAN; the computer will
automatically scan the function of TIME, SPEED, DIST (DISTANCE), CAL (CALORIES),
ODO (ODOMETER), and
(PULSE) every 6 seconds.
TIME: Press MODE button until the screen displays TIME; the computer will display your
elapsed workout time in minutes and seconds. When you start to exercise, time starts
counting up from 0:00 to 99:59 minutes per 1 second increment. You may also preset
target time before training. Press MODE button to select TIME function and then press
SET button to preset target time. Press RESET button to clear the target values of TIME to
zero. The preset target time range is from 0:00 to 99:00 minutes. Once you preset target
time and then start to exercise, time starts counting down from preset target time to 0:00 per
1 second backward. When the preset target time counts down to 0:00, time will start to
count up immediately and the computer will begin beeping to remind you.
SPEED: Press MODE button until the screen displays SPEED; the computer will display the
current training speed.
DIST (DISTANCE): Press MODE button until the screen displays DIST; the computer will
display the accumulative distance traveled during workout. When you start to exercise,
distance starts counting up from 0.0 to 999.9km per 0.1km increment. You may also preset
target distance before training. Press MODE button to select DIST function and then press
SET button to preset target distance. Press RESET button to clear the target values of
DISTANCE to zero. The preset target distance range is from 0.0 to 999.0km. Once you
preset target distance and then start to exercise, distance starts counting down from preset
target distance to 0.0 per 0.1km backward. When the preset target distance counts down
to 0.0, distance will start to count up immediately and the computer will begin beeping to
remind you.
CAL (CALORIES): Press MODE button until the screen displays CAL; the computer will
display the total accumulated calories burned during workout. When you start to exercise,
calories start counting up from 0.0 to 999.9 calories. You may also preset target calories
5
before training. Press MODE button to select CAL function and then press SET button to
preset target calories. Press RESET button to clear the target values of CALORIES to zero.
The preset target calories range is from 0.0 to 999.0 calories. Once you preset target
calories and then start to exercise, calories start counting down from preset target calories to
0.0. When the preset target calories count down to 0.0, calories will start to count up
immediately and the computer will begin beeping to remind you. (This data is a rough guide
for comparison of different exercise sessions and should not be used in medical treatment).
ODO (ODOMETER): Press MODE button the screen displays ODO; the computer will
display the total accumulative distance traveled. The data values of ODO can not be clear
to zero by pressing and holding MODE or RESET button for 3 seconds. If you take out the
batteries from the computer, the ODO data values will clear to zero.
(PULSE): Press MODE button until the screen displays a symbol; the computer will
display your current heart rate figures after you hold both two hands on handlebar grip
sensors during exercise. To ensure the pulse readout is more precise, please always hold
on to the handlebar grip sensors with two hands instead of just with one hand only when you
try to test your heart rate figures.
You may also preset target heart rate before training. Press MODE button to select
PULSE function and then press SET button to preset target heart rate. Press RESET
button to clear the target heart rate to zero. The preset heart rate range is from 40 to 240
beats/minute. Once you preset target heart rate and then start to exercise, please hold
both two hands on handlebar grip sensors during exercise. If the heart rate detected
greater than the target heart rate, the computer will begin beeping to remind you.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove batteries and wait 15
seconds before reinstalling.
6
PARTS LIST
No. Description Qty No. Description Qty
001 Main Frame 80x40x2 1 024 Nylon Nut M6 10
002L Left Foot Bar 40x25x1.5 1 025 Washer Ø6 6
002R Right Foot Bar 40x25x1.5 1 026 Bolt M6x40 6
003L Left Handrail Arm Ø32x1.5 1 027 Tension Cable L=1800 1
003R Right Handrail Arm Ø32x1.5 1 028 Cap S13 2
004L Left Handrail Ø32x1.5 1 029 Screw ST4.2x25 15
004R Right Handrail Ø32x1.5 1 030L Foot Bar Cover-A 2
005 Front Post Ø60x1.5 1 030R Foot Bar Cover-B 2
006 Handlebar Ø25x1.5 1 031 Big Washer Ø20xØ8.5x1.5 2
007 Front Stabilizer Ø60x1.5x380 1 032 Bolt Ø10x46 2
008 Rear Stabilizer Ø60x1.5x480 1 033 Left Foot Pedal 395x150x65 1
009 Bolt M8x70 4 034 Right Foot Pedal 395x150x65 1
010L Rear Left Stabilizer End Cap Ø60 1 035 Front Left Stabilizer End Cap Ø60 1
010R Rear Right Stabilizer End Cap
Ø60
1 036 Front Right Stabilizer End Cap Ø60 1
011 Big Curve Washer Ø20xØ8 10 037 Cover Cap Ø40xØ25x10 2
012 Cap Nut M8 4 038 Bolt M8x15 8
013L Bolt for left U Shape Bracket 1/2” 1 039 Powder Metal Bushing
Ø14.2xØ10.2x10
4
013R Bolt for right U Shape Bracket
1/2”
1 040 Bolt M8x20 2
014L Left Nylon Nut 1/2” 1 041 Spring Washer Ø8 8
014R Right Nylon Nut 1/2” 1 042 Washer Ø38x3 2
015 Wave Washer Ø28xØ17x0.3 2 043 Powder Metal Bushing
Ø38xØ32xØ19x14
4
016 Powder Metal Bushing
Ø24.5xØ16x14
4 044 Bolt M6x35 4
017 Spring Washer Ø20 2 045 Curve Washer Ø6 4
018 Bearing 6000 2Z 2 046 Big Washer Ø10 2
019 Washer 7/8" 1 047 Bolt M6x10 1
020 U Shape Bracket 2 048 Plastic Bushing Ø32xØ16x5xØ50 2
021 Nylon Nut M8 5 049L Left Handrail Arm Cover-A 1
022 Washer Ø16xØ8x1.5 6 049R Right Handrail Arm Cover-A 1
023 Bolt M8x45 2 050L Left Handrail Arm Cover-B 1
7
PARTS LIST
No. Description Qty No. Description Qty
050R Right Handrail Arm Cover-B 1 078 Flywheel Ø230x40x32 1
051 Tension Control Knob 1 079 Belt PJ380 J6 1
052 Screw ST4.2x20 2 080 Idle Wheel Bracket 1
053 Computer (JVT29121) 1 081 Bolt M6x15 2
054 Rear Decorate Cover Ø60 1 082 Adjustable Bolt M6x36 2
055 Hand Pulse Sensor with Wire
L=750
2 083 U Bracket 2
056 Handrail Foam Grip
Ø31xØ37x480
2 084 Nut M6 2
057 Handrail Foam Grip
Ø27xØ33x360
2 085 Spring Washer Ø6 2
058 Handrail End Cap Ø32x1.5 2 086 Power Metal Bushing Ø18xØ8x5 4
059 Handlebar End Cap Ø28x1.5 2 087 Nut M10 2
060 Phillips Self Tapping Screw
ST4.2x25
8 088 Bolt M5x10 4
061 Curve Washer for Tension
Control Knob Ø20xØ5.2
1 089 Bolt M8x10 1
062 Bolt for Tension Control Knob
M5x55
1 090 Front Decorate Cover Ø60 1
063 Adjustable Leveler M10 2 091 Left Decorate Cover Ø60 1
064 Sensor Wire I L=1100 1 092 Right Decorate Cover Ø60 1
065 Sensor Wire II L=1300 1 093 Curve Washer Ø16xØ8 2
066 Screw ST2.9x12 2 094 Screw ST4.2x12 8
067 Left Cover 1 095 Washer Ø14xØ10x1 2
068 Right Cover 1 096 Bolt M8x25 1
069 Axle Bush 2 097 Plastic Bushing 1
070 Ball Bearing 2 098 Seat Post Cover 1
071 Axle Sleeve I 15/16” 1 099 Round Knob M16x1.5 1
072 Axle Sleeve II 7/8” 1 100 Seat Adjustment Knob M8 1
073 Washer Ø34.5xØ23x2.5 1 101 Seat Post 1
074 Hexagon Nut 7/8” 1 102 Seat Sliding Tube End Cap (38x38) 2
075 Belt Pulley with Crank 6.5”/Ø260 1 103 Seat Sliding Tube 1
076 Big Washer Ø6 1 104 Seat Cushion DD-98-2AT 1
077 M10x1 Nut for Flywheel 2
8
HARDWARE PACKING LIST
(9) Bolt M8x70
4 PCS
(12) Cap Nut M8
4 PCS
(13R) Bolt for right U Shape
Bracket 1/2” 1 PC
(14R) Right Nylon Nut 1/2” 1 PC
(15) Wave Washer
Ø28xØ17x0.3 1 PC
(17) Spring Washer Ø20 1 PC
(13L) Bolt for left U Shape
Bracket 1/2” 1 PC
(14L) Left Nylon Nut 1/2” 1 PC
(15) Wave Washer
Ø28xØ17x0.3 1 PC
(17) Spring Washer Ø20 1 PC
(24) Nylon Nut M6
10 PCS
(25) Washer Ø6
6 PCS
(26) Bolt M6x40
6 PCS
(28) Cap S13
2 PCS
(11) Big Curve Washer Ø20xØ8
4 PCS
(44) Bolt M6x35
4 PCS
(45) Curve Washer Ø6
4 PCS
(94) Screw ST4.2x12
8 PCS
(29) Screw ST4.2x25
4 PCS
9
TOOLS
Allen Wrench 8mm
1 PC
Allen Wrench 6mm
1 PC
Multi Hex Tool
1 PC
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15
1 PC
10
OVERVIEW DRAWING
58
56
4L
49L
50L
40
41
42
43
48
3L
5
3R
51
50R
49R
4R
58
56
42
41
40
44
43
43
48
94
64
27
61
62
43
94
53
88
1
64
65
9
7
32
39
31
2L
8
10R
9
13L
15
16
20
22
21
23
28
14L
17
16
2R
39
26
34
68
13R
16
15
20
22
21
17
14R
24
25
28
23
44
24
45
39
39
30R
78
77
77
79
75
84
83
82
59
55
6
52
57
93
24
25
24
45
66
80
72
74
70
19
69
70
69
71
47
76
81
81
31
32
18
73
89
86
86
96
67
37
37
63
87
29
60
29
35
63
87
10L
65
90
54
60
30L
60
91
92
46
46
60
95
60
29
85
29
94
94
94
94
88
38
38
11
41
38
11
41
36
30R
60
86
33
26
84
83
82
85
30L
60
29
11
12
12
11
104
99
97
98
22
100
101
102
102
22
21
103
11
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (7) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (7) onto the front curve of the Main Frame (1) with two M8x70
Bolts (9), Ø20xØ8 Big Curve Washers (11), and M8 Cap Nuts (12). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear curve of the Main Frame (1) with two M8x70
Bolts (9), Ø20xØ8 Big Curve Washers (11), and M8 Cap Nuts (12). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
4 Bolts (M8x70)
4 Big Curve Washers (Ø20xØ8) 4 Cap Nuts (M8)
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
8
1
7
9
11
12
9
12
12
11
11
12
2. Front Post and Tension Control Knob Installation
Remove six M8x15 Bolts (38), Ø8 Spring Washers (41), and Ø20xØ8 Big Curve Washers
(11) from the Main Frame (1).
Insert the Tension Cable (27) through into the bottom hole of Front Post (5) and pull it out
from the square hole of Front Post (5).
Connect the Sensor Wire II (65) from the Main Frame (1) to the Sensor Wire I (64) from the
Front Post (5).
Insert the Front Post (5) onto the tube of the Main Frame (1) and secure with six M8x15 Bolts
(38), Ø8 Spring Washers (41), and Ø20xØ8 Big Curve Washers (11) that were removed.
Remove the Ø20xØ5.2 Curve Washer for Tension Control Knob (61) and M5x55 Bolt for
Tension Control Knob (62) from the Tension Control Knob (51). Put the cable end of
resistance cable of Tension Control Knob (51) into the spring hook of Tension Cable (27) as
shown in drawing A of figure 2. Pull the resistance cable of Tension Control Knob (51) up
and force it into the gap of metal bracket of Tension Cable (27) as shown in drawing B of
figure 2. Attach the Tension Control Knob (51) onto the Front Post (5) with the Ø20xØ5.2
Curve Washer for Tension Control Knob (61) and M5x55 Bolt for Tension Control Knob (62)
that were removed.
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Allen Wrench 6mm
Tool:
41
41
38
11
27
65
61
62
51
64
38
11
5
1
27
27
27
51
51
A B
13
3. Left/Right Handrail Arms, Left/Right Foot Bars, Left/Right Foot Pedals, and Foot
Bar Covers-A/B Installation
Remove two M8x20 Bolts (40), Ø8 Spring Washers (41), Ø10 Big Washers (46), and Ø38x3
Washers (42) from the left and right horizontal axes of the Front Post (5). Then attach the
Left Handrail Arm (3L) onto the left horizontal axis of the Front Post (5) with one M8x20 Bolt
(40), Ø8 Spring Washer (41), Ø10 Big Washer (46), and Ø38x3 Washer (42) that were
removed.
Attach the left U Shape Bracket (20) to the left Crank (75) with one 1/2” Bolt for left U Shape
Bracket (13L), Ø28xØ17x0.3 Wave Washer (15), Ø20 Spring Washer (17), and 1/2” Left
Nylon Nut (14L). Install a S13 Cap (28) onto the M8x45 Bolt (23).
NOTE: 1/2” Bolt for left U Shape Bracket (13L) and 1/2” Bolt for right U Shape Bracket (13R)
are marked “R” for Right and “L” for Left.
Attach the Left Foot Pedal (33) onto the Left Foot Bar (2L) with three M6 Nylon Nuts (24),
Ø6 Washers (25), and M6x40 Bolts (26).
Remove two ST4.2x25 Phillips Self Tapping Screws (60) from the Left Foot Bar (2L).
Attach the Foot Bar Covers-A/B (30L, 30R) onto the Left Foot Bar (2L) with one ST4.2x25
Screw (29) and two ST4.2x25 Phillips Self Tapping Screws (60) that were removed.
Repeat above step to attach the Right Handrail Arm (3R) onto the right horizontal axis of the
Front Post (5) and right U Shape Bracket (20) to the right Crank (75).
Hardware:
6 Nylon Nut
s
(
M6
)
2 Cap
s
(
S1
3
)
2
Screw
s
(ST4.2x25)
6 Washer
s
(
Ø6
)
6Bolt
s
(
M6x40
)
(1
3
L) Bolt for left U Shape
Bracket 1/2” 1 PC
(14L) Left Nylon Nut 1/2” 1 PC
(15) Wave Washer
Ø28xØ17x0.3 1 PC
(17) Spring Washer Ø20 1 PC
(1
3
R) Bolt for right U Shape
Bracket 1/2” 1 PC
(14R) Right Nylon Nut 1/2” 1 PC
(15) Wave Washer
Ø28xØ17x0.3 1 PC
(17) Spring Washer Ø20 1 PC
Tool:
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Allen Wrench 8mm
Multi Hex Tool
60
26
60
30L
30R
33
2L
24
25
29
42
40
41
13L
75
46
3R
5
48
3L
28
2R
15
13R
14R
17
14L
15
17
20
23
14
4. Seat Post, Seat Post Cover, Seat Cushion, and Seat Sliding Tube Installation
Slide the Seat Post Cover (98) onto the tube of the Main Frame (1).
Insert the Seat Post (101) into the Plastic Bushing (97) on the tube of the Main Frame (1)
and then attach the Round Knob (99) onto the tube of the Main Frame (1) by turning it in a
clockwise direction to lock the Seat Post (101) in the suitable position.
Adjusting the seat height:
Turn the Round Knob (99) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (99) and then slide the Seat Post (101) up or down direction to the suitable
position. Lock the Seat Post (101) in place by releasing the Round Knob (99) and sliding
the Seat Post (101) up or down slightly until the Round Knob (99) "pops" down into the
locked position. For added safety, tighten the Round Knob (99) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of plastic bushing.
Remove three M8 Nylon Nuts (21) and Ø16xØ8x1.5 Washers (22) and from underside of the
Seat Cushion (104). Guide bolts on underside of the Seat Cushion (104) through holes on
top of the Seat Sliding Tube (103), attach with three removed M8 Nylon Nuts (21) and
Ø16xØ8x1.5 Washers (22) and tighten. Remove one Ø16xØ8x1.5 Washer (22) and Seat
Adjustment Knob (100) from underside of the Seat Sliding Tube (103). Guide bolt on
underside of the Seat Sliding Tube (103) through hole on top of the Seat Post (101), attach
with one removed Ø16xØ8x1.5 Washer (22) and Seat Adjustment Knob (100) and tighten.
Adjusting the seat forward or back:
Turn the Seat Adjustment Knob (100) to loosen the Seat Sliding Tube (103). Slide the Seat
Sliding Tube (103) forward or back to desired position and turn Seat Adjustment Knob (100)
to tighten.
NOTE: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
104
99
98
22
100
101
22
21
103
97
1
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
15
5. Left and Right Handrails Installation
Attach the Left/Right Handrails (4L, 4R) onto the Left/Right Handrail Arms (3L, 3R) with four
M6x35 Bolts (44), Ø6 Curve Washers (45), and M6 Nylon Nuts (24).
Hardware:
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
24
45
44
44
45
24
4L
3L
5
3R
4R
4 Bolts (M6x35) 4 Curve Washers (Ø6) 4 Nylon Nuts (M6)
16
6. Front/Rear Decorate Covers and Left/Right Handrail Arm Covers-A/B Installation
Attach the Front and Rear Decorate Covers (90, 54) onto the Front Post (5) with two
ST4.2x25 Screws (29).
Attach the Left Handrail Arm Cover-A (49L) and Left Handrail Arm Cover-B (50L) onto the
Left Handrail Arm (3L) with four ST4.2x12 Screws (94).
Attach the Right Handrail Arm Cover-A (49R) and Right Handrail Arm Cover-B (50R) onto
the Right Handrail Arm (3R) with four ST4.2x12 Screws (94).
Hardware:
8 Screws (ST4.2x12)
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
54
49R
50L
49L
3L
5
4L
50R
4R
94
94
3R
94
94
90
29
2 Screws
(
ST4.2x
2
5)
17
7. Computer and Handlebar Installation
Remove four M5x10 Bolts (88) from the back of the Computer (53).
Remove two M8x15 Bolts (38) and Ø16xØ8 Curve Washers (93) from the Front Post (5).
Insert the Hand Pulse Sensor Wires (55) from the Handlebar (6) into the hole on the Front
Post (5) and then pull them out from the top end of the Front Post (5).
Attach the Handlebar (6) onto the Front Post (5) with two M8x15 Bolts (38) and Ø16xØ8
Curve Washers (93) that were removed.
Connect the Sensor Wire I (64) and Hand Pulse Sensor Wires (55) to the wires that come
from the Computer (53) and then attach the Computer (53) onto the top end of the Front
Post (5) with four M5x10 Bolts (88) that were removed.
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Allen Wrench 6mm
Tool:
5
53
64
88
55
93
38
6
18
MAINTENANCE
Cleaning
The elliptical trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical trainer
after each use. Be careful not get excessive moisture on the computer display panel as this
might cause an electrical hazard or electronics to fail.
Please keep the elliptical trainer, specially, the computer console, out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every
week.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM: The elliptical trainer wobbles when in use.
SOLUTION: Turn the adjustable leveler on the rear stabilizer as needed to level the elliptical
trainer.
PROBLEM: There is no display on the computer console.
SOLUTION: Remove the computer console and verify the wires that come from the
computer console are properly connected to the wires that come from the front post.
SOLUTION: Check the batteries are correctly positioned and battery springs are proper
contact with batteries.
SOLUTION: The batteries in the computer console may be dead. Change the new
batteries.
PROBLEM: There is no heart rate reading or heart rate reading is erratic or inconsistent.
SOLUTION: Make sure that the wire connections for the hand pulse sensors are secure.
SOLUTION: To ensure the pulse readout is more precise, please always hold on to the
handlebar grip sensors with two hands instead of just with one hand only when you try to test
your heart rate figures.
SOLUTION: Gripping the hand pulse sensors too tight. Try to maintain moderate pressure
while holding onto the hand pulse sensors.
PROBLEM: The elliptical trainer makes a squeaking noise when in use.
SOLUTION: The bolts may be loose on the elliptical trainer, please inspect the bolts and
tighten the loose bolts.
19
WARM UP AND COOL DOWN ROUTINE
A good exercise program consists of a warm-up, aerobic exercise, and a cool down. Do the
entire program at least two to three times a week, resting for a day between workouts. After
several months you can increase your workouts to four or five times per week.
AEROBIC EXERCISE is any sustained activity that sends oxygen to your muscles via your
heart and lungs. Aerobic exercise improves the fitness of your lungs and heart. Aerobic
fitness is promoted by any activity that uses your large muscles eg: legs, arms and buttocks.
Your heart beats quickly and you breathe deeply. An aerobic exercise should be part of
your entire exercise routine.
The WARM-UP is an important part of any workout. It should begin every session to
prepare your body for more strenuous exercise by heating up and stretching your muscles,
increasing your circulation and pulse rate, and delivering more oxygen to your muscles.
COOL DOWN at the end of your workout, repeat these exercises to reduce soreness in tired
muscles.
HEAD ROLLS
Rotate your head to the right for one count,
feeling the stretch up the left side of your neck,
then rotate your head back for one count,
stretching your chin to the ceiling and letting
your mouth open. Rotate your head to the left
for one count, then drop your head to your chest
for one count.
SHOULDER LIFTS
Lift your right shoulder toward your ear for one
count. Then lift your left shoulder up for one
count as you lower your right shoulder.
20
SIDE STRETCHES
Open your arms to the side and lift them until
they are over your head. Reach your right arm
as far toward the ceiling as you can for one
count. Repeat this action with your left arm.
QUADRICEPS STRETCH
With one hand against a wall for balance, reach
behind you and pull your right foot up. Bring
your heel as close to your buttocks as possible.
Hold for 15 counts and repeat with left foot.
INNER THIGH STRETCH
Sit with the soles of your feet together and your
knees pointing outward. Pull your feet as close
to your groin as possible. Gently push your
knees toward the floor. Hold for 15 counts.
21
HAMSTRING STRETCHES
Extend your right leg. Rest the sole of
your left foot against your right inner
thigh. Stretch toward your toe as far as
possible. Hold for 15 counts. Relax
and then repeat with left leg.
CALF/ACHILLES STRETCH
Lean against a wall with your left leg in front of
the right and your arms forward. Keep your
right leg straight and the left foot on the floor;
then bend the left leg and lean forward by
moving your hips toward the wall. Hold, then
repeat on the other side for 15 counts.
TOE TOUCHES
Slowly bend forward from your waist, letting
your back and shoulders relax as you stretch
toward your toes. Reach as far as you can and
hold for 15 counts.
… 22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info