FIGURE 4
S
TEP 4:
• Place the GUIDE RODS (AC) through the BOTTOM SHROUD BRACKET and into the BASE
FRAME (B) as shown in FIGURE 4.
• Note: Lubricate the GUIDE RODS (AC) with the included silicon package.
• Slide two WEIGHT STACK SPACERS (AD) and two WEIGHT STACK CUSHIONS (AE) down
over the GUIDE RODS (AC).
• Using EXTREME CARE slide all fifteen WEIGHT PLATES (AS) down over the GUIDE RODS
(AC) on to the WEIGHT STACK CUSHIONS (AE). Make sure that the WEIGHT PLATES (AS)
are all facing as shown.
• Slide the HEAD PLATE (AF) down over the GUIDE RODS (AC) onto the weight stack.
• Slide two SHAFT COLLARS (29) over the GUIDE RODS (AC) as shown in FIGURE 4.
• Apply WEIGHT STACK LABELS (AQ) to the WEIGHT PLATES (AS) and the HEAD PLATE (AF)
as shown in FIGURE 4. Begin with number one at the HEAD PLATE (AF) with larger numbers in
consecutive order towards the bottom of the weight stack.
