26
Defrosting
The appliance defrosts automatically. The water that forms on the rear wall drains
into a reservoir at the back of the appliance and evaporates automatically through the
compressor heat.
Cleaning
Before cleaning always switch off the appliance. Pull out the mains plug or remove/
unscrew the fuse.
Never use abrasive or acidic cleaning agents or chemical solvents. We recommend the
use of an all-purpose cleaner with neutral pH.
Do not use steam cleaners because of the risk of injury and damage.
• Do not use abrasive sponges or scourers, do not use concentrated cleaning agents and
never use cleaning agents containing sand, chloride or acid or chemical solvents, as
these would damage the surfaces and could cause corrosion.
• Clean the side panels and door surfaces with a clean and soft cloth. If necessary, use
a moist cloth (water + detergent). Alternatively, use a micro-fibre cloth.
• Clean the inside of the appliance, except the wooden grid shelves, with lukewarm
water and a little detergent.
• Ensure that no cleaning water penetrates into the electrical components.
• Dry all parts well with a cloth.
• Do not remove the type plate from the inside of the appliance; it is important for
servicing purposes.
