495721
7
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
-
The cross section of the ventilation gap below the ceiling
must be at least 300 cm
2
.
-
the larger the ventilation space, the more energy-saving the
appliance is in operation.
If the appliance is installed with the hinges next to a wall
Fig. 8 (4)
, the distance between appliance and wall has to be at
least 40 mm. This corresponds to the projection of the handle
when the door is open.
4.5 Disposing of packaging
WARNING
Danger of suffocation due to packing material and plastic film!
u
Do not allow children to play with packing material.
The packaging is made of recyclable materials:
-
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
u
Take the packaging material to an official collecting point.
4.6 Connecting the appliance
NOTICE
Failure to connect properly
Damage to the electronics.
u
Do not use a standalone inverter.
u
Do not use an energy saving plug.
WARNING
Failure to connect properly
Fire hazard.
u
Do not use an extension cable.
u
Do not use distributor blocks.
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see 1 Appliance at a glance) .
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
u
Check the electrical connection.
u
Plug in the power plug.
4.7 Switching on the appliance
u
Press On/Off button
Fig. 3 (1)
.
w
The appliance is switched on. The temperature display indi-
cates the set temperature.
w
If “DEMO” is displayed, demo mode is activated. Please
contact the after sales service.
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Setting the brightness
The brightness is adjustable between h 0 (minimum bright-
ness) and h 5 (maximum brightness).
u
Activate setting mode by pressing the SuperFrost* button
Fig. 3 (3)
/SuperCool* button
Fig. 3 (4)
for approx. 5 sec.
w
The Menu symbol is shown on the display,
Fig. 3 (5)
.
w
c flashes on the display.
u
Use the adjustment button,
Fig. 3 (2)
, to select h.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.
w
The display shows the last set brightness value.
u
Use the adjustment button,
Fig. 3 (2)
, to set the desired
value from h 0 to h 5.
u
Briefly confirm the newly set brightness value with the
SuperFrost* button
Fig. 3 (3)
/ SuperCool* button
Fig. 3 (4)
.
w
h flashes on the display.
w
The brightness is set.
u
After making the change, deactivate setting mode: Press the
On/Off button
Fig. 3 (1)
once.
w
The temperature display shows the temperature again.
If setting mode is already activated but you would like to keep
the old brightness value setting:
u
Press the On/Off button
Fig. 3 (1)
twice to deactivate setting
mode.
w
The temperature display shows the temperature again.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 Setting the child lock
To switch on the function:
u
Activate setting mode: press SuperFrost* button
Fig. 3 (3)
/
SuperCool* button
Fig. 3 (4)
for approx. 5 seconds.*
w
The Menu symbol
Fig. 3 (5)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.*
w
c1 appears in the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.*
w
The child lock symbol
Fig. 3 (7)
, lights up on the
display.
w
c flashes on the display.
w
The child lock function is switched on.
If setting mode is to be terminated:
u
Briefly press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The temperature display shows the temperature again.
To switch off the function:
u
Activate setting mode: press the SuperFrost* button
Fig. 3 (3)
/SuperCool* button
Fig. 3 (4)
for
approx. 5 seconds.*
w
The Menu symbol
Fig. 3 (5)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.*
w
c0 appears in the display.
u
Briefly confirm with the SuperFrost* button
Fig. 3 (3)
/Super-
Cool* button
Fig. 3 (4)
.*
w
The child lock symbol
Fig. 3 (7)
goes out.
Control
* Depending on model and options 7
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Liebherr TP1764 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Liebherr TP1764 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Liebherr TP1764

Liebherr TP1764 Gebruiksaanwijzing - Nederlands - 12 pagina's

Liebherr TP1764 Gebruiksaanwijzing - Deutsch - 12 pagina's

Liebherr TP1764 Gebruiksaanwijzing - Deutsch - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info