805279
6
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
NOTICE
Covered vents!
Damage. Appliance can overheat, which can reduce the
service life of various parts of the appliance and lead to
operational impairments.
uAlways make sure there is good ventilation.
uAlways keep vents or ventilation grids in the appliance
housing and in the kitchen furniture (fully integrated
appliance) unobstructed.
NOTICE
Risk of damage due to condensate!
uDo not install the appliance directly alongside a further
refrigerator/freezer.
qBefore you connect the appliance, report any damage
immediately to the delivery company.
qThe floor of the installation site must be horizontal and
even.
qDo not install the appliance in direct sunlight, next to an
oven, radiator or similar.
qThe best place for installation is a dry and well ventilated
room.
qInstall the appliance with the rear panel up against the
wall and always use the supplied wall spacers (see
below).
qOnly ever move the appliance when it is empty.
qThe surface supporting the appliance must be at the
same level as the surrounding floor.
qDo not install the appliance on your own.
qThe more refrigerant there is in the appliance, the larger
the space that it is installed in must be. If the space is
too small, any leak may create a flammable mixture of
gas and air. For every 8 g of refrigerant, the installation
space must be at least 1 m3. Information regarding the
coolant can be found on the type plate inside the appli‐
ance.
uDetach the connecting cable from the rear of the appli‐
ance, removing the cable holder at the same time
because otherwise there will be vibratory noise!
uRemove all transit supports.
To achieve the specified energy consumption, use the
spacers, which are supplied with some appliances. This
increases the appliance depth by approx. 35 mm. The
appliance will work properly without the spacers but will
consume slightly more energy.
uIn the case of an appliance with
enclosed wall spacers, mount
the wall spacers on the back
of the appliance at the top left
and right.
uDispose of packaging material (see 4.5 Disposing of
packaging) .
uAlign the appliance so that it
stands firmly and on a level
by applying the accompa‐
nying spanner to the adjust
able-height feet (A) and
using a spirit level.
Note
uClean the appliance (see6.2Cleaning the appliance) .
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
uAlways see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
Make sure that the following tools are at hand:
qTorx® 20
qTorx® 15
qSupplied open-ended wrench
qIf necessary, a second person to assist with installation
CAUTION
Risk of injury if the door tips!
uTake good hold of the door.
uSet down the door carefully.
Fig.4 On appliances with a door handle
Putting into operation
6 * Depending on model and options
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Liebherr GP1213 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Liebherr GP1213 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Liebherr GP1213

Liebherr GP1213 Gebruiksaanwijzing - Nederlands - 14 pagina's

Liebherr GP1213 Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info