779290
13
Verklein
Vergroot
Pagina terug
1/74
Pagina verder
15
Removing the storage battery
(figure E)
Open the cover on the storage battery compart-
ment (1j) and remove the storage battery (9).
PLEASE NOTE: If the storage battery
connector plug (9a) (9b) is connected to the
quadrocopter (1), then you must release this from
the quadrocopter (1) before removing the storage
battery (9) .
Charging the storage battery
(figure F)
1. Remove the storage battery (9) from the
storage battery compartment (1g) on the qua-
drocopter (1).
WARNING: Never charge the storage
battery (9) while it is still mounted on the
quadrocopter (1), it could catch fire and destroy it.
Do not remove the outer case from the storage
battery (9). This serves to protect the storage
battery (9).
2. Connect the end of the cable (6a) on the USB
charger cable (6) to the storage battery plug
connector (9a) on the storage battery (9).
3. The charge control lamp on the USB charger
cable (6) switches on.
4. Insert the other end of the cable (6b) on the
USB charging cable (6) into a USB port on an
active computer or a charging station with USB
port.
5. The charge control lamp on the end of the
cable (6b) switches off.
PLEASE NOTE: The charging time is
approx. 90 - 100minutes.
6. The charge control lamp switches on as soon
as the storage battery (9) is charged.
7. After charging disconnect the storage battery
plug connection (9a) from the end of the cable
(6a) on the USB charger cable (6) and pull
the end of the cable (6b) of the USB charging
cable (6) from the USB port.
8. Insert the storage battery (9) correctly into the
storage battery compartment (1g) (see ‘starting
to fly’).
Inserting the storage battery
1. Open the cover (1i) on the storage battery com-
partment (1g) and insert the storage battery (9).
2. Connect the storage battery plug connections
(9a) (9b) to the quadrocopter (1).
3. Close the storage battery compartment (1i)
completely.
Low voltage warning
The lights (1h) begin to flash when the storage
battery (9) is almost empty. Land the quadro-
copter (1) as soon as you notice this.
Setting the camera (figure G)
The camera (1e) is secured under the quadrocopter
(1). Turn the wheel on the camera up or down in
order to move the position of the camera lens.
PLEASE NOTE: The camera (1e) features
a small status LED. In order to provide gre-
ater visibility, camera functions are also displayed
via the LED’s on the Quadrocopter (1).
Transferring data (figure H)
The recorded photos and films are saved on the
micro-SD card (10). Proceed as follows in order to
transfer the data on a computer to a device with
an USB port (for example a television):
1. The micro-SD card (10) is in the camera (1e).
Press on the micro-SD card (10) and remove it
from the camera (1e).
2. Push the micro-SD card (10) all the way into the
micro-SD card USB stick (7) as shown in figure H.
PLEASE NOTE: Make sure that the
micro-SD card (10) is inserted correctly. It
must disappear completely into the micro-SD card
USB stick (7).
3. Insert the micro-SD card USB stick (7) into the
USB port of a computer.
4. The computer recognises the micro-SD card
USB stick (7) and you can copy the data onto
the computer.
GB/IE/NI
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lidl QUADROCOPTER - IAN 284749 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lidl QUADROCOPTER - IAN 284749 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens als bijlage per email.

De handleiding is 4.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info