455514
114
Verklein
Vergroot
Pagina terug
1/121
Pagina verder
108
FAX machines, to send any
message unless said
message clearly contains in
a margin at the top or bottom
of each transmitted page or
on the first page of the
transmission, the date and
time it is sent and an
identification of the business
or other entity, or other
individual sending the
message, and the telephone
number of the sending
machine or such business,
other entity, or individual.
(The telephone number
provided may not be a 900
number or any other number
for which charges exceed
local or long-distance
transmission charges.)
See the section in this
publication entitled
Personalize Fax, on page 12,
in order to program this
information into your fax
machine.
Notice to users of the
Canadian telephone
network
This product meets the
applicable Industry Canada
technical specifications.
The Ringer Equivalence
Number (REN) is an
indication of the maximum
number of terminals allowed
to be connected to a
telephone interface. The
terminus of an interface may
consist of any combination of
devices, subject only to the
requirement that the sum of
the Ringer Equivalence
Numbers of all the devices
does not exceed five. The
modem REN is located on
the rear of the equipment on
the product labeling.
Telephone companies report
that electrical surges,
typically lightning transients,
are very destructive to
customer terminal
equipment connected to AC
power sources. This has
been identified as a major
nationwide problem. It is
recommended that the
customer install an AC surge
arrestor in the AC outlet to
which this device is
connected. This is to avoid
damage to the equipment
caused by local lightning
strikes and other electrical
surges.
This equipment uses CA11A
telephone jacks.
Using the X6100 Series
All-In-One in Germany
The X6100 Series All-In-One
requires a German billing
tone filter (Lexmark part
number 14B5123) to be
installed on any line which
receives metering pulses in
Germany. Metering pulses
may or may not be present
on analog lines in Germany.
The subscriber may request
that metering pulses be
placed on the line, or can
have them removed by
calling the German network
provider. Normally, metering
pulses are not provided
unless specifically requested
by the subscriber at the time
of installation.
Using the X6100 Series
All-In-One in
Switzerland
The X6100 Series All-In-One
requires a Swiss billing tone
filter (Lexmark part number
14B5109) to be installed on
any line which receives
metering pulses in
Switzerland. The Lexmark
filter must be used, as
metering pulses are present
on all analog telephone lines
in Switzerland.
The Lexmark X6100 Series
has been tested and found to
comply with the limits for a
Class B digital device,
pursuant to Part 15 of the
FCC Rules. Operation is
subject to the following two
conditions: (1) this device
may not cause harmful
interference, and (2) this
device must accept any
interference received,
including interference that
may cause undesired
operation.
The FCC Class B limits are
designed to provide
reasonable protection
against harmful interference
in a residential installation.
This equipment generates,
uses and can radiate radio
frequency energy and, if not
installed and used in
accordance with the
instructions, may cause
harmful interference to radio
communications. However,
there is no guarantee that
interference will not occur in
a particular installation. If this
equipment does cause
harmful interference to radio
or television reception, which
can be determined by turning
the equipment off and on, the
user is encouraged to try to
correct the interference by
one or more of the following
measures:
Reorient or relocate the
receiving antenna.
Increase the separation
between the equipment
and receiver.
Connect the equipment
into an outlet on a circuit
different from that to
which the receiver is
connected.
Consult your point of
purchase or service
representative for
additional suggestions.
The manufacturer is not
responsible for any radio or
television interference
caused by using other than
recommended cables or by
unauthorized changes or
modifications to this
equipment. Unauthorized
changes or modifications
could void the user's
authority to operate this
equipment.
Note:To assure
compliance with FCC
regulations on
electromagnetic
interference for a Class B
114

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lexmark X 6150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lexmark X 6150 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lexmark X 6150

Lexmark X 6150 Gebruiksaanwijzing - Nederlands - 121 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info