20464
98
Verklein
Vergroot
Pagina terug
1/145
Pagina verder
Solving media feed problems
98
Troubleshooting
Solving media feed problems
Symptom Cause Solution
Paper frequently jams. Media that does not meet the
printer specifications is being used.
Use recommended media.
See the Card Stock & Label Guide available on our
Lexmark Web site at www.lexmark.com for detailed
specifications.
See Clearing jams for more information.
See Avoiding jams hints for information that can help
prevent jams from occurring.
Too much paper or too many
envelopes are loaded.
Make sure the stack of media loaded does not exceed
the maximum stack height indicated by the load line on
the tray or the stack height limiter on the multipurpose
feeder.
Guides in the selected tray are not
set to the appropriate position for
the size paper loaded.
Move the guides in the tray to the correct position.
See Loading the standard tray and Loading the
optional 500-sheet tray for detailed instructions.
The paper has absorbed moisture
due to high humidity.
Load paper from a fresh package.
Store paper in its original wrapper until it is loaded.
See Storing media for more information.
Some printer models do not have a
standard bin full sensor.
Remove media from the standard bin.
The standard bin media stop is not
set to the correct position for the
media size.
Set the media stop in the standard bin to the correct
position. See Using the media stop for more
information.
The multipurpose feeder door is
designed to tilt down to prevent
damage to it when the lower door is
opened. This is a protective feature
of the printer.
To reposition the multipurpose feeder door:
1 Remove media from the multipurpose feeder.
2 Push the extensions back into place.
3 Close the multipurpose feeder.
4 Open the multipurpose feeder.
5 Grasp the multipurpose feeder extension, and pull it
straight out until fully extended.
6 Load media into the multipurpose feeder.
The fuser may be installed
incorrectly.
CAUTION: The fuser and the inside
of the printer near the fuser may be
hot. Wait for the fuser to cool before
attempting to solve this problem.
1 Turn the printer off.
2 Open the upper door.
3 Push down on the fuser handles while tightening
each fuser thumbscrew.
4 Close the upper door completely.
5 Open the upper door completely.
6 Re-tighten each fuser thumbscrew completely.
7 Close the upper door completely.
8 Turn the printer on.
The fuser may be damaged. Replace the fuser.
The Paper Jam
message remains after
the jam is removed.
The entire media path is not
cleared, or the door specified by the
message has not been opened to
check for jams in this area.
Clear media from the entire path, open the door
indicated by the operator panel message, clear the
jam, and close the door. The printer resumes printing.
See Identifying the media path for more information.
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lexmark C522 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lexmark C522 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Lexmark C522

Lexmark C522 Gebruiksaanwijzing - Nederlands - 35 pagina's

Lexmark C522 Gebruiksaanwijzing - Espanõl - 152 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info