FLASH FUNCTION
Switch on the camera:
1. Auto Flash
In camera mode, press the Up/Flash button (6) until the icon appears
on the lower left corner of the LCD screen. The auto ash function will be
activated.
2. Flash on
In camera mode, press the Up/Flash button (6) until the icon appears on
the lower left corner of the LCD screen. The ash function will be activated.
3. Flash off
In camera mode, press the Up/Flash button (6) until the icon appears on
the lower left corner of the LCD screen. The ash function will be disabled.
SELECTING THE PHOTO RESOLUTION
1. In camera mode, press the Power/Menu button (8) to enter the settings
menu (the battery level and the number of photos/videos stored in memory
are displayed on screen).
2. Use the Up (6) or the Down (12) buttons until the “Resolution” icon
appears, then press the Shutter button (2) within 5 seconds.
3. Use the Up (6) or the Down (12) buttons to select the desired resolution,
then press the Shutter button (2) within 5 seconds to conrm your choice.
There are 3 resolution modes:
High resolution (1600 x 1200 pixels).
Normal resolution (1280 x 1024 pixels).
Low resolution (640x480 pixels).
SELF-TIMER (CAMERA MODE ONLY)
1. In camera mode, press the Power/Menu button (8) to enter the settings
menu.
2. Use the Up (6) or the Down (12) buttons until the “Self-timer” icon
appears, then press the Shutter button (2) within 5 seconds to turn on the
self-timer function.
3. The digital camera will take a picture 10 seconds later.
Note: The self-timer feature is automatically turned off after the picture has
been taken.
