35
ATTENTION
• The washer must be used on a secure and stable surface in a standing, upright position.
Connect the product to power and water supply as described.
• Open the water supply
• Hold the spray gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards the surface to be cleaned.
• Unlock the trigger and press it until a constant amount of water flows through the nozzle, to allow
air trapped in the hose to escape.
• Release the trigger.
• Turn on the switch “OFF/ON”.
• Hold the spray gun with both hands. Direct the water jet to the object to be cleaned and press the
trigger.
Release the lever of the trigger gun; the device will switch off again and stop the water jet. High pressure
remains in the system.
WARNING! Beware of kickback when pressing the trigger!
Regulation of spray picture of spray lance
The spray picture can be regulated on the spray lance.