automatically) or manually input the IP address for wireless network
connection.The following information has to be entered: SSID (nameof
access point), IP Address, subnet mask, default gateway, preferred DNS
server, alternate DNS server.
Tips: When “OFF” is selected, the time will be same as the current time. If it
was already in “Daylight Saving Time(DST)” and you choose”OFF”,the time
will be deducted by one hour,that’s to say,the time will be same as the actual
time.
There are 3 independent Alarms which can be set. 2 different Alarms (Alarm 1,
Alarm 2) and one NAP alarm which is a countdown alarm which can be used
when doing a quick sleep.
Press the Alarm button to enter the alarm settings menu directly and follow
the following steps.
Setting the alarm
- Press the ‘Alarm’ button
- Select Alarm 1
- Select Turn On
- Press the navigation wheel on the unit.
- Press the ‘ok’ on the “Repeat:” option and select the how the alarm
should work. (Everyday, once or select the required days)
- Press the left arrow key to return to the previous alarm menu then select
“Time:” and press ‘ok’
- You now can use the up down buttons to change the highlighted Hours
then press the right arrow button once to switch to the Minutes and use
the up/down buttons to change the minutes. Press the ‘ok’ button to
confirm.
- Select the “Sound:” and press the ‘ok’ button. Now you can choose
between Beep, Melody, Internet Radio, FM, DAB/DAB+, USB, Spotify
connect. If you have an account and already connected the PIR-510 to
Spotify before: When internet radio is selected as wake up sound, you
can use one of your favorite radio stations (which have to be stored as
favorite on the PIR-510).
Note: when no internet connection is available within 1 minute after
the alarm is activated the PIR-510 will automatically switch to Melody.
When selecting USB as wake up sound, you can select one of the music
files stored on the inserted usb memory device.
