10
OTHER DAB + MENU OPERATIONS
Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER
knob (or press the or button) for different options as described below.
Prune Invalid
This function removes inactive stations.
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “Prune Invalid” is
selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) to select “Yes”.
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment.
The DRC level of a broadcast is set by the selected radio channel and transmitted with the
service. Changing the DRC value on your unit enables you to apply a scaling factor to this
level.
There are three levels of compression:
DRC high :
Maximum compression as sent with the transmitted service
DRC low :
Set to 1/2 that of the sent transmitted service
DRC off :
No compression
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “DRC” is selected and
then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) to select “High”, “Low” or “Off”.
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Note:
- Not all DAB + radio stations are able to use DRC function. If the station does not support
DRC then the DRC setting will have no effect.
- After you have adjusted the DRC level the sound may be louder.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the button to start auto-scanning and saving the available stations
(max. 20 storage).
Manual Scan
1. Turn on the unit in FM mode.
2. Press the or button repeatedly to manually tune to a different frequency.
3. Or press and hold the or button to automatically search to the next available
channel.
