61388
18
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
MDV-6
Home Cinema Set
-1-
FOREWORD
THANKS
Thank you for purchasing this product.
Your choice of the product sufficiently displays your expertise in acoustic equipment.
We are honored to provide you with more satisfactory products. It is suggested that you
spare some time to read this user manual before connecting and operating your system.
So you can get enhanced enjoyment and pleasure while using this product.
IMPORTANT NOTICE
Please unpack carefully, and keep all the accessories in the same place.
Please check any possibilities in shipping damage. If your devices are damaged
or cannot be operated, please notify your local dealers immediately. If the
device is shipped to your place directly, please contact the carrier as soon as
possible. Only the consignee (individual or company to receive the devices) is
entitled to claim indemnity to the carrier in the light of shipping damages. We
recommend that you keep the original cartons and packing materials soundly for
future shipping.
SPECIAL NOTE
1. Minimum distances around the apparatus for sufficient ventilation;
2. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-clothes, curtains, etc;
3. No naked flame sources, such as lighted candles should not be placed on the apparatus;
4. Attention should be draw to the environmental aspects of battery disposal;
5. The use of apparatus in tropical and/or moderate climates;
6. Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
7. This unit is controlled by micro-computer; it may cause error displaying when this unit is
posited in interferential place. In this case, please turn off the power exceed 10 seconds,
and the unit will resume normal after turning on.
-2-
CONTENT
FOREWORD……………………………………………………………………………………..1
CONTENT………………………………………………………………………………………...2
FRONT PANEL...………………………………………………………………………………..3
BACK PANEL……………………………………………………………………………………4
REMOTE CONTROL……………………………………………………………………………5
CONNTECTION WITH TV……………………………………………………………………...6
CONNECTION WITH AMPLIFIER…………………………………………………………..7
SYSTEM CONNECTION……………………………………………………………………..8
BASIC OPERATION……………………………………………………………………....9-16
DVD MENU SETUP..…………………………………………………………………….17-20
SPECIFICATION……………………………………………………………………………..21
TROUBLE SHOOTING…………………………………………………………………………22
ACCESSORIES
-3-
FRONT PANEL
1. Remote control sensor
2. Power
3. Stop
4. Disc tray
5. Eject
6. Display screen
7. Fast rewind/Fast forward/(Tune -/+)
8. Volume +/-
9. Previous/Next (Channel -/+)
10. FM/Search
11. DVD/Save
12. Audio/Mono/Stereo
13. Play/Enter
-4-
BACK PANEL
1. Y, Pb/Cb, Pr/Cr component output
2. L/R audio output
3. Coaxial output
4. S-video output
5. Optical fiber output
6. Video output
7. Scart output
8. L/R audio input
9. L/R speaker output
10. Subwoofer output
11. FM antenna interface
12. Power on/off
13. Power supply input
-5-
REMOTE CONTROL
NOTE:
1. Place the batteries in the remote control and turn on the player, put the emitter against the sensor of
player for remote control.
2. The distance of remote control should not exceed 7 meters, or else, it will be invalid.
3. If the sensor or remote control emitter is stuck with foreign matters, it may result in the malfunction in
signal reception or not at all.
4. The remote control function may be affected under the strong interference signals, such as power
supply and other strong high-frequency signals.
REMARK: Remote Control Battery Type: Size: AAA Standard Voltage: 1.5V
-6-
CONNECTION WITH TV
1. If your TV-set has AV terminal, connect this unit to TV-set with A/V cables, and set TV-set to be
AV status after confirming the connection is correct. (Figure 1)
2. If your TV-set has S-Video terminal, please use the S-Video connection cable to connect the
player and TV-set, to obtain a higher quality image. (Figure 2)
3. If your TV-set has chromatics output terminal, please use three connection cables to connect
the player and TV-set, to obtain a more vivid image. (Figure 3)
4. This unit has an output interface for SCART output, which can directly be connected with TV-set.
(Figure 4)
Note:
1. Please turn off the both player and TV before they are connected to the power line from the
socket.
2. You may adjust the corresponding system according to your TV system while watching various
discs.
3. If there are multiple connections between video player and TV, please select one and unplug
others so as not to affect the quality of images and sound.
4. Do not switch on /off or press power switch frequently, switching on and off each time must have
an interval of 3 seconds.
5. Do not connect the digital optical or coaxial output jack of this player with the analogue signal
input terminal for reception.
-7-
CONNECTION WITH AMPLIFIER
Setup of Digital Audio Output
Connect the optical or coaxial output jack to the amplifier. While in of play or stop mode,
press the setup button on the remote control to open the system setup page, switch to
audio setup page by pressing the directional buttons, then move the cursor to Audio Out,
select SPDIF/RAW or SPDIF/PCM, press Play/Enter button to finish. Press Setup button
again to exit the setup.
-8-
SYSTEM CONNECTION
Please refer to the following figure to connect your acoustic equipment.
To keep all the connection correctly and firmly.
Power supply can be connected finally.
-9-
BASIC OPERATION
PREPARATIVE
1). Before turning on, check whether all the connection are correct and reliable. Plug the power
plug into the corresponding power socket.
2). Press Power button on the front panel to turn on.
3). Press Eject button on the remote control (or on the front panel) to carry the disc tray outside,
and put the disc into the tray, press Eject button again, this unit starts to read and play.
MUTE
In play status, If the Mute button is pressed, there will be no audio output, the sound is
eliminated, however the image will still be played normally. Then press the button again or
press Vol.+/- button to exit the mute status, the sound resumes to be its normal status.
STATUS DISPLAY
In play status, press OSD button, the TV screen will display the following data:
VCD/CD display: single elapsed, single remain, total elapsed, total remain, display off.
DVD display: title elapsed, title remain, chapter elapsed, chapter remain, display off.
SOUNDTRACK SWITCH
In playing VCD/CD, press LANG/(L/R) button to select the multiple output modes such as Mono
L, Mono R, Stereo, and Mix-mono. Press the button once to switch one soundtrack.
In playing DVD, press LANG/(L/R) button can select multiple languages for playback. (Only
applies to the discs like DVD recorded in multiple languages.)
FAST FORWARD & FAST REWIND
In play status, press TU- button or TU+ , there will be various speeds of fast rewind and
fast forward, shown as follows,
FORWARD X 2, FORWARD X 4, FORWARD X 8, FORWARD X 16, FORWARD X 32, PLAY
BACKWARDX2, BACKWARDX4, BACKWARDX8, BACKWARDX16, BACKWARDX32, PLAY
PREVIOUS & NEXT
In play status, press CH- button, the device will skip to the previous one for play, press
CH+ button, the device will skip to the next one.
SUBTITLE SELECTION
When the played DVD disc records multiple subtitles, you can make selections of subtitle
language by pressing SUB button:
English, French, German, Spanish and Dutch.
SLOW
While playing the disc, every time the Slow button is pressed, the speed of the disc will play in
1/2, 1/4, 1/8 or 1/16.
-10-
BASIC OPERATION
TIME SELECTION
In play mode, press T/F button on the remote control, the TV screen displays,
VCD/CD Display: Disc Go To: --/--
Track Go To: --/--
Select Track: --/xx
DVD Display: Title: --/xx Chapter: --/xx
Title: --/xx Time: -/--/--
Chapter: --/xx Time:-/--/--
You can press directional buttons to move the cursor to the time position, then input the
corresponding numbers by pressing the numeric buttons, then press Play/Enter button to enter the
desired part for playing. The optional time range depends on the volume of the played disc.
VCD/CD example: The screen displays Disc Go To: --/--.
To select 55 minutes 20 seconds, input 5,5,2,0.
DVD example; The screen displays Title xx/xx Time.
To select 1 hour, 30 minutes, and 20 seconds, input 1,3,0,2,0.
REPEAT
In play status, repeatedly press Repeat button to separately select the different contents for
repetition.
1). As for DVD, repeatedly press Repeat button, the TV screen will separately display:
Chapter, Title, All.
2). As for CD, VCD, CD-R discs, Successively press this button, the screen will separately
display: Track, All.
3). As for MP3, JPEG and other media files, there are options: Single, Repeat one, Repeat
folder, Folder.
A-B REPEAT
In play status, press Rep.A-B button to realize the specific section repeat, that is, press this
button once at the beginning of the section (A), and press it again at the end of the section ( B),
this player will automatically return to A and starts to repeat playing the section from A to B.
Press the button again to exit.
TITLE
If the played DVD disc contains a directory column, press the Title button to take out the items
contained in this disc. Use the direction buttons to move the cursor to select the items you want
to play, or directly use the number button to select.
-11-
BASIC OPERATION
LOUDNESS
Press Loud button to set loudness on or off. While set loudness on, it can strength low sound
signal.
SOUND FIELD
In play status, press DSP button, you can select different sound field effect.
RESET
In No Disc status, press Reset button can return the original setup or default value.
STOP
In play mode, press the Stop button, the TV screen will return to the startup screen, press
Play/Enter button, the player will begin to play where it left off. If you successively press
Stop button twice and then press Play/Enter button, the disc will be played from the
beginning.
PAUSE
In play status, press Pause button, the player will pause, and press it again or press
Play/Enter button once to continue playing.
MENU
Pressing Menu button on the remote control opens or closes the PBC menu.
Note: 1). It will go into the Root menu when playing DVD discs.
2). Older discs or some copies dont support this function.
ANGLE SELECTION
In play status, repeatedly press Angle button, you can enjoy the same action shot in
different angles. (The function depends on the discs.)
VOLUME ADJUSTMENT
You can press the VOL-/+ button to turn up or down the volume of this unit.
DIRECTION BUTTONS
Press the Direction buttons to move the cursor to select pictures or menu.
-12-
BASIC OPERATION
PLAY/ENTER
Press this button to enable the selected items.
CLEAR
Press Clear button to cancel the digital you have inputted. For example: the setting of
programmed songs.
STANDBY
Press the Standby button on the remote control can switch to the standby mode. Before
you perform the operation, make sure the main power is on.
Note: This standby function is one kind of saving electricity modes. When the device does
not be used for a long time, please close the main power.
INPUT SELECTION
1) Correctly connect the outer equipment (e.g. PC computer) with this unit, and then
press the Audio-in button on the remote control (or front panel) to enter Audio status to
enjoy the outer audio source.
2) Press the FM button on the remote control (or front panel) to select tuner.
3) Press the DVD button on the remote control (or front panel) to select DVD mode. The
unit will start playing if there is a disc inserted.
TONE
If you want to adjust the volume of Treble, Bass or Subwoofer. First to press the Tone
button, select to the corresponding item and press Vol+/- button on the remote control can
increase or reduce the volume of Treble, Bass or Subwoofer.
ZOOM
In play status every time the Zoom button is pressed, the TV screen will be zoomed in or
out proportionally. In case of zoom proportion more than 1, pressing direction button is able
to move the picture, continuously press the button, the TV screen display will be zoomed in
2 times, 3 times, 4 times.
SHORTCUT
When play DVD discs, press the Shortcut button to jump over the initial title, menu or warnings.
(Only for some discs, subject to the quality or recorded status of the played discs)
-13-
BASIC OPERATION
DITITAL BUTTONS
1). While playing songs, press the Digital buttons to directly select the songs you need.
2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and
then pressing a Digital button (1--10). For example: If the 16th song is needed, you can press the 10+
button followed by the 6 button.
PROGRAM
In play VCD/CD disc, press In play DVD disc, press the Program button,
the Program button, the TV the TV screen shows:
Screen shows:
1. If the player is in the PBC ON status, and the programmed songs are being play, this operation will
result in PBC turning off.
2. Input the number that you want at the place of the cursor; move the cursor to ``START``; press the
Play/Enter button, the songs will play in the specified order.
3. While programming, press the Clear button to eliminate the digitals that you input.
4. To cancel programmed play: press the Program button again, the cursor will move to ``Stop``
automatically; press Play/Enter button, the cursor move to ``EXIT`` automatically, press Play/Enter
again to cancel programmed play.
MP3 DISC PLAYING FUNCTION
1). Press the Eject button on the remote control (or front panel) to open the disc tray, put in
an MP3 disc, then press the Eject button to close the disc tray. This unit begins to read it,
and the TV screen will display the following figure,
-14-
BASIC OPERATION
2). Press the directive keys ▲▼ to move the cursor to a certain directory, and press
Play/Enter button to enter the directory. Press the direction buttons to enter the
subdirectory or the file area, select a song with the cursor, press Play/Enter button to play
the song.
l During playing, press or button to select other songs under the current
directory.
l During playing, press the left direction button, the icon will skip to the directory symbol
, press the up/down direction button to select other directories, press Play/Enter
buttons for confirmation.
Note: When play MP3 discs, this unit also has the functions such as mute, pause, previous
and next selection. The operation is identical with CD playing.
MPEG4JPEG PICTURE DISC PLAYING FUNCTION
1). Place the MPEG4/JPEG disc into the deck, this unit will begin to read, the main
directory will be displayed on the TV screen.
2). Press the direction button ▲▼ to move the cursor to the corresponding directory, press
Play/Enter button to enter the next layer, and so on, until the desired picture is found for
play.
l During play, number buttons or button can be used to select pictures.
l JPEG pictures may distort at the edge to some TV sets, this is not a unit defect.
l This unit can play the digital photo discs with extension name .JPEG, and also
support the picture that made by Adobe Photoshop.
l If you want to repeat playing some pictures, pressing the Repeat button is OK.
l During browsing , press the Stop button can go back to main menu.
l After go into the subdirectory in playing MPEG4 disc, also you can do the
operation such as fast backward, fast forward, pause. etc,.
-15-
BASIC OPERATION
DVD TITLE MENU SELECTION FUNCTION
DVD disc features high capacity, records more than one movie, background data and
songs. It is hereby given a name of TITLE, while more sections will be given under each
TITLE, which are called Chapters. There are some songs in one chapter. While playing
DVD discs, press the Title button, the TITLE menu will appear on the TV screen. (Available
for DVD discs that contain more than one title menu).
You can use the direction buttons to move the cursor to the desired title menu, press
Play/Enter button to play it. If the title menu is represented by numbers, then press the
number buttons to select directly.
-16-
BASIC OPERATION
FM RADIO OPERATION
1. Enter FM Function
In the turn-on or playing status, press the FM button on the remote control to enter FM status.
2. Select Bands
1) Directly input frequency: press the T/F button on the remote control, and then input the
frequency that you want.
2) Select band by pressing TU- or TU+ button: under some frequency, press the button, the
frequency will be up or down on the step. The step of FM is 0.05 MHz.
3) Select band by pressing number buttons: you may select the bands that have been saved by
pressing the number buttons. For example: press 10+ button twice, 5 button once, you may
select the 25th band. Press the CH- or CH+ button, the band will be switched up or down.
4) Automatically search bands: press the Search button, this unit will start to search bands from
the lowest part to highest part automatically. Meanwhile the searched bands will be saved
orderly. Press the button again to stop searching.
3. Save Bands
Press the Save button, that means saving the current frequency of band. For example: If you want to
save 99.3 MHz in 28th, please press 10+ button twice, 8 button once, then press T/F button to input
993, then press Save button to save this frequency.
4. Soundtrack Selection
Press MO/ST button on the remote control, you may select Mono and Stereo soundtrack output in
FM status. If the signal is not strong enough, you can not select Stereo.
5. Exit FM Status
Press the DVD button to exit FM status and enter the disc playing.
Remark: FM Frequency range: 87.50-108.00MHz
( Beyond the range, input is invalidity.)
NOTE: 1. You may adjust the best radio effect by adjusting the FM antenna.
2. You can search further bands by pressing Search button when adjusted the FM antenna
in a right position.
3. If the band is not clear by auto search, you choose the way manual search adjustment by
press TU-/TU+ button.
-17-
DVD MENU SETUP
Press the Setup button on the remote control to open the menu setup function, the TV screen will display
the following figures.
1. DVD Setup Page
1). OSD Language
This option is used to select the language for menu and other screen displays, includes English, French,
German, Spanish and Dutch.
2). Audio (Language)
While playing DVD disc, the player will automatically play the Pre-selected language, Includes English,
French, German, Spanish, Dutch and Others. If there is no such option in the disc, the default language
of the disc will be played.
3). Subtitle (Language)
While playing DVD disc, the player will automatically play the pre-selected subtitle if there is such a
language in the disc. The options are as follows, English, French, German, Spanish, Dutch and Others. If
there is no such an option in the disc, the default subtitle language of the disc will be played.
4). Menu (Language)
While playing DVD disc, this unit has the following languages available: English, French, German,
Spanish, Dutch and Others.
Note: If there is no the language you selected in the DVD disc, the player will automatically play the
default recorded in the disc.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lenco MDV-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lenco MDV-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Lenco MDV-6

Lenco MDV-6 Gebruiksaanwijzing - Nederlands - 24 pagina's

Lenco MDV-6 Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info