477341
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Turn off the power
In order to minimize power consumption, set the power switch to the "OFF" position after
using the equipment to turn off the power.
Standby
When the power switch is set to the "ON" position, press the "POWER" key on the remote control to enter
the standby mode. In standby mode, the indicator light on the power switch will flash green ,
To turn on the speaker, either press the "POWER" key on the remote control again, or move the power
switch on the IPD-4500 system to the "OFF" position and move it to "ON" position again, and the IPD-4500
system will be ready to play.
Although this mode can reduce power consumption, it does not completely shut off the IPD-4500 system.
In order to minimize power drain, it is recommended that the power switch be set to the "OFF" position if
the IPD-4500 system is not to be used for a long time.
Built-in NI-MH rechargeable batteries
1. There are Nickel metal hydride rechargeable batteries built into the IPD-4500 system.
Plug the barrel plug on the adapter into the jack marked on the operating panel of the IPD-
4500 system, and then plug the external 9 V DC@ 2A power supply adapter into an AC wall outlet. After
this connection is completed, the rechargeable batteries in the IPD-4500 system can be charged whether
the system is being played or not. If there is an iPod®/iPhone® with a 30PIN connector connected to the
iPod®/iPhone® socket of the IPD-4500 system, then the iPod®/iPhon can be charged at the same time.
2. The LED light between the power switch on the panel of the IPD-4500 system and the iPod®/iPhone®
socket is the charger power level indicator light.
In the OFF mode:
a. When the AC IN cord is not plugged in: the light is off
b. When the AC IN cord is plugged in: if the power level is sufficient — the light is off
Charging – the green light flashes
In the ON mode:
a. When the AC IN cord is not plugged in: if the startup power level is sufficient for normal use
the green light is on
Warning of insufficient power level — the red light is on
The power is depleted — the light is off.
b. When the AC IN cord is plugged in, if the power level is sufficient — the green light is on
Charging — the green light flashes
Signs of abnormal battery activity:
a. When the unit is not plugged into an external power supply, no power is available to the IPD-4500 – or
the power light is off.
b. When the IPD-4500 is plugged into an external power supply – The red light flashes.
Note: "Abnormal battery condition" refers to an abnormal state caused by improper installation or use of
the battery or other problems including damage to the battery, incorrect battery polarity, lack of a
battery or end of life of the battery.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lenco IPD-4500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lenco IPD-4500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Lenco IPD-4500

Lenco IPD-4500 Gebruiksaanwijzing - Nederlands - 10 pagina's

Lenco IPD-4500 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info