62739
25
Verklein
Vergroot
Pagina terug
1/41
Pagina verder
Table Of Contents
Important
Safety Instructions
--------------------------------------------------
1
Characteristic Features
---------------------------------------------------------
3
Disc Information
--------------------------------------------------------
-----------
4
Front Panel
----
-------------------------
----------------------------------------------
5
Rear Panel
-----
--------------------------
---------------------------------------------
7
Remote Control
---
------------------------
--------------------------
----------------
8
System Connections
-------------
-------
-----------------------------
--------
---
11
Connecting to Power Supply
-------------------------
------------
-
--------------
11
Connecting to External AV Signal Source
-----
---
-----------
---------
--------
11
Connecting to External AV Signal Source (YPbPr)
--------
--------------
--
12
Connecting to External AV Signal Source (SCART)
--------
------------
--
12
Connecting to External AV Input Device (AV Output)
--------
-----------
--
13
Connecting to Earphone
--------
-------------------------
------------------------
13
Connecting to
PC
--------------------------------------
-----
---
------------------
--
14
Connecting to TV Antenna
-------------------------------------------------------
15
TV
Function
-
------
---------------
---
--------------
---------
--------------
--------
---
16
Preparations
-----------------------------------------------
--------------------------
16
Image Setting
---------------------------------------------
--------------------------
16
Audio Setting
-----------------
-----------------------------
--------------------------
18
Timer Setting
-------------------------------------------
-----------------------
--
----
19
Setup Setting
----------------------------------------------
--------------------------
19
NICAM Function
--------
-
-----
----------
------------
----
-----------
-----
---
-----
23
DVD Playback Operation
-----
----------
------------
----
-----------
-----
---
-----
24
USB and SD/MS/MMC Card
Function
-------------------------------------
29
DVD System Setup
------------------------------
---------------------------------
30
Other Functions
-------------------------------------------------------------------
38
External AV Input Function
--------------
----
-------------------------------------
38
Computer Screen Function
--------------------
-------
---------------------------
38
Troubleshooting
-
------
---------------------
-----------------
---------
------------
39
Specifications
-
------
----------
-----------------
---------
--------------
--------
---
-
40
- 1 -
Important Safety Instructions
Caution:
use of any controls, adjustments, or procedures other than those specified herein may
result in hazardous radiation exposure
.
Caution
1. The
product
contains
a low
-
power device. In order to ensure the safety of the laser device, do not
remove any cover and attempt to repair the unit. If any service needed, please contact the
distributor or its authorized service center.
2. To reduce the risk of electric shock, do not remove the cover (back). No user-serviceable parts
inside. Refer serving to qualified service personnel. Unplug the product from the wall outlet before
serving or when it is unused for a long period of time.
3.
The
manufacturer should not hold
responsibility
for the damage caused by any substitutions and
modification of the
product
without
authorization from the manufacturer
s or authorized unit.
WARNING
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Copyright Protection
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
This symbol indicates that dangerous voltage instituting a risk of electric shock is
present
within this unit.
This symbol indicates that there are i
mportant
operation and maintenance
instructions in the literature
accompanying
the appliance.
C
aution
:
Lase
r radiation when open. Do
not stare into
beam.
- 2 -
Important Safety Instructions
NOTES
1.
Read these
instructions
2.
Keep these instructions
3.
Heed all warnings.
4.
Following all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings.
8.
Install according to the manufacturer instructions. D
o not install near any heat sources
s
uch
as
radiators, heat registers, stoves or other
apparatus
(
including amplifiers) that produce
heat.
9.
Read, heed and follow all instructions to
ensure correct and safe installation and
interconnection of the apparatus;
10.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with
liquids,
such as vases, shall be placed on the apparatus.
11.
The mains socket
-
outlet shall be installed
near the apparatus and the mains plug shall
remain
readily operable.
12.
Protect the power cord from being walked on
or pinched particularly at
plugs, convenience
re
ceptacles, and the point where they exit
from the apparatus.
13.
Only use attachments/accessories specified
by the manufacturer.
14.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold
with the apparatus. When a cart is
used,
use caution when moving the cart/apparatus
combination to avoid injury from tip
-
over.
15.
Unplug the apparatus during lightning storms
or when unused for long periods of time.
16.
Refer all servicing to qualified
service
personnel. Servicing is required whe
n the
apparatus has
been damaged in any way,
such as power
-
supply cord or plug is
damaged, liquid has been
spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or
moisture, does
not operate normally, or has been dropped
.
17.
The apparatus shall be connected to a mains
socket outlet with a protective earthing
connection
.
Note: D
o not touch the color TFT LCD screen by hand directly
.
IMPORTANT FOR LASER PRODUCTS
1. CLASS
1
LASER PRODUCT
2. DANGER: Visible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3. CAUTION:
Do not open the top cover. There are
no
user serviceable parts inside the unit. Leave all
servicing to qualified service personnel.
- 3 -
Characteristic Features
This product incorporates DVD player, LCD disp
lay and TV receiver in one system.
Multiple Mode
TV mode
SCART mode
CVBS mode
S-
VIDEO mode
COMPONENT mode
VGA
mode
DVD mode
High Quality Properties
High Resolution
Adopt an MPEG2 decoding format to achieve
horizontal resolution more than 500 lines
.
LCD (Liquid Crystal Display)
Designed with
19"
color
TFT
liquid crystal
display clearly shows the data.
Stereo amplifier
Built
-
in
2x
3w speakers provide high quality
sound
.
AV and VGA Input
Can be connected to external audio and video
signal sourc
e and PC.
Special Function
Support sleep time setting function and favorite
channel setting function, etc.
Multi
-
audio and Multi
-
video modes
Support multi-audio and multi-video modes,
provide more selecting.
USB and CARD PORTS
Designed with USB and SD
/MS/MMC card port,
can be connected to USB device or
SD/MS/MMC Card.
Auto TV
S
earching Function
Can be connected to the TV antenna, support
Auto and manual TV programs searching
function.
NICAM Function
Supports the NICAM function.
According
to the
broadc
asting programs, you can choose the
corresponding
soundtrack.
Advanced Playing
Features
Auto DVD Function
Whether it is in DVD mode or not, when
inserting a disc into the disc tray, the unit will
shift to DVD mode and start playback
automatically; when ejecting the disc, it will
return to the prior mode automatically.
Compatibility
DVD,
CD
and JPEG
discs
compatible.
All Playback Functions
Fast forward and
backward
,
slow playback and
repeat playback.
Special
playback
.
Support
s multi-angle, multi-language and
multi
-
subtitle playback
.
NOTE:
It is normal for a TFT screen to display
some light or dark spots on the LCD screen.
- 4 -
Disc Information
Discs
Formats Supported By This Player
DISC
LOGO
CONTENTS
SIZE
MAXIMUM TIME
1
33min(SS
-
SL)
242min(SS
-
DL)
266min(DS
-
SL)
DVD
Audio
+
Video
(active picture)
12
cm
484min(DS
-
DL)
CD
Audio
12cm
74
min
JPEG
Still high resolution
12cm
The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, title .
Chapter
Usually one title is comprised of one or more chapters and each of them is numbered for easy
searching. But some discs may not have a recording chapter.
Track
A segment of picture or music on a CD. Each track is numbered for easy searching.
Front Panel
- 5 -
1.
19" color TFT screen
19" color TFT screen clearly show
s
the data.
2.
SOURCE button
Press to select mode
among
TV,
SCART,
CVBS, S
-
VIDEO, Component, VGA
and
DVD.
3.
MENU button
Press to enter or exit setup menu.
4.
CH
/
button
In the TV mode, press to select channels.
In setup menu, the same function as
/
direction buttons.
5.
VOL
/
button
In the TV mode, press to decrease or increase the volume.
In setup menu, the same function as
/
direction buttons.
In setup m
enu, the
VOL
has
the same function as
the
ENTER button.
6.
PLAY
button
Press to play the disc
in
DVD mode.
Front Panel
7.
STOP
button
- 6 -
Press to stop disc
playback.
8.
Eject button
Press to
eject the disc.
9.
Power button
Press
to ente
r or exit the standby mode.
10.
SD/MS/MMC Card Port
Insert the SD, MS or MMC card into the port.
11.
Disc Tray Slot
Used to load disc.
12.
Earphone Jack
When connected to earphone, the internal speakers will
automatically
turn off.
13.
USB Connecting Port
Connecting to t
he USB device.
14.
Remote Sensor
Remote
sensor window for the remote control.
15.
Power Indicator
In normal playback status, it is blue; in standby mode, it turns red.
16.
Speakers
Two speakers output high quality stereo sound.
Rear Panel
- 7 -
1.
Y/Pb/Pr Input Jack
Connected
to the Y/Pb/Pr input in
COMPONENT
mode.
2.
Y/Pb/Pr L/R Audio Input Jack
Connected
to the L/R audio input in
COMPONENT
mode.
3.
Composite
Audio/Video Output Jack
In the CVBS mode, connected to output
the Audio/Video signals.
4. S-
VIDEO
and CVBS Audio/Video Input
Jack
Connected
to the S-
VIDEO
input in
S-VIDEO mode or CVBS input in the
CVBS mode. The L/R audio input jacks
can be used in the both S-VIDEO and
CVBS
modes.
5.
SCART Input J
ack
Connected
to the SCART input in
SCART
mode.
6.
TV Signal Input Jack
Connected
for the external TV signal input.
7.
DC 12V Input Jack
Connect the power adaptor or the car
adaptor.
8.
VGA
Input Jack
Connect
ed to the VGA output jack on a
personal computer.
9.
PC AUD
IO Input Jack
Connected to
the PC audio output jack
.
Remote Control
- 8 -
Remote Control Drawing
1.
POWER button
Press on or off to turn this unit on or off
2.
TV
button
Press to
shift to T
V mode
.
3.
DVD
button
Press to shift to DVD mode.
4.
P.M.
button
Press to shift the screen picture modes
among User, Standard, Soft, Brightness
and Shine.
5.
S.M.
button
Press to shift the sound modes among
User, Standard, Music, Movie and Speech.
6.
0~9 Number button
s
Press to select numbers such as TV
channel.
7.
FAV
button
Press to access to
favorite
channels and
press the CH
buttons to select.
8.
STEREO/Audio
button
Press to shift sound track when in TV
mode (Please see P24 for details).
Press to select audio language or audio
track when in DVD mode.
9.
VOL
+/
-
button
Press to increase or decrease the
volume.
10.
MUTE button
Press to
turn on or off speaker output.
11.
EXIT
button
Press to exit from
the
setup menu.
12.
Direction buttons (
)
In the setup menu, press the
button to
select a desired item and press the
button to adjust or set.
13.
ENTER button
Press to confirm your selection.
14.
S
OURCE button
Press to select mode
among
TV,
SCART,
CVBS, S-VIDEO, Component, VGA and
DVD.
15.
PLAY
button
Press to play a disc when in the DVD
mode.
16.
PAUSE button
When in DVD mode, press to pause
playback. Press the
PLAY button to
resume normal pla
yback.
17.
/
button
Press to search backward or forward when
in DVD mode.
Remote Control
- 9 -
18.
TITLE button
When a DVD is playing, press the TITLE
button to go to the title menu and display
disc contents.
Under TV
or SCART vid
eo
mode, press to
display/close the teletext or display mixed
mode.
19.
MENU button
(under DVD mode)
Press to enter disc menu when in DVD
mode.
In teletext mode, press to exit from the
teletext mode
.
20.
SETUP button
Press to open DVD setup menu when in
D
VD mode.
In
Teletext
mode, press to display page
100.
21.
SLOW button
Press to activate slow playback function
when in
DVD mode
.
Under
Teletext
mode
,
press once to
display
the
concealed information, such as
solution of riddles or puzzles; press again
to move the riddles information from the
display.
22. D
-
SUB
button
Press to
shift to VGA
mode
.
23.
SCART
button
Press to
shift to SCART
mode.
24.
DISPLAY
buttons
Press to
display
the reference information
of the current program.
25.
SET FAV
button
Press to
set
the current channel as a
favorite channel
.
26. /+
10
buttons
When in TV mode, press to return to the
channel previously viewed. When in DVD
mode, press to select numbers greater
than
10.
27.
SCAN
/SUBTITLE
button
When in TV mode, press to scan the
programs
and press again to stop scanning.
When in
DVD
mode, press to select
alternate subtitle languages during
playback of a multiple language DVD disc.
28
. CH +/
-
button
When in TV mode, press to select
channel.
29.
ASPECT
button
Press to shift the aspect ratio
of the screen
between Fill Screen and Aspect
Normal .
30.
MENU button
Press to enter or exit the setup menu.
31.
SLEEP
button
This feature allows
you to set up sleep time
when in TV mode. Press the button and
then press the ENTER button to activate
thi
s function. Then press the
direction
buttons to select the desired time to sleep.
32.
Eject button
Press to eject the disc from the unit.
33.
STOP button
Press to stop disc playback when in DVD
mode.
34. /
Next Skip button
Press to skip to the previ
ous
or
next
chapter/track when in DVD mode.
35.
REPEAT button
Press to repeat a chapter, track, title or all
content when in DVD mode.
In
Teletext
mode, press to stop the
automatic
changing of pages consisting of
two or more sub pages.
36.
ANGLE button
Press to select various camera angles (if
the DVD supports multiple camera angles)
when in DVD mode
.
Under
Teletext
mode, Press button A first
time
to
double
the
size
of
teletext
letters in
the upper half of the screen,
a second time
to do
uble
the
size
of
te
letext letters in the
lower half of the screen
and
a third time to
resume normal
status
.
37.
CARD
button
Press to shift among disc playback, USB
playback and SD/MS/MMC playback.
Under
Teletext
mode, press to select
four
groups
3-digit numbers that are disp
layed
in different colors at the bottom of the
screen.
Press the colored buttons on the
remote control to select, then use the
number buttons to input the
corresponding
number
to display
the page.
Repeat
the above procedures for each
page to be stored, usi
ng a different colored
button
accordingly
each time.
Remote Control
- 10 -
38.
GOTO
button
Press to select the desired disc starting
time, title or chapter when in DVD mode.
In teletext mode, press to select a sub
page number,
it will
d
isplay at the bottom of
a screen.
Preparation
of
Remote Control
Softly push the back cover to open the battery
compartment.
Insert two batteries (1.5V, size AAA), please
make sure the polarity matches the marks
inside the compartment.
Soft
ly press the back cover to close it.
Under normal use the battery will last for
six months.
Take out battery when the remote is not in
use for a long time.
Using the Remote control
Point the remote control unit from no more than
about
7m
from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary
depending
on the amount of light in the
invironment
.
Notes:
Do not point bright lights
directly
at the
remote control sensor.
Do
not place objects between the remote
control unit and the remote control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.
System Connections
- 11 -
Do not connect the power cord until all other connections have been made.
Ensure that you observe the color
of the connectors
when connecting audio and video cables.
Connecting to Power Supply
Power is supplied through the provided appropriative power adapter, one end is connected to the
DC 12V IN jack on the side panel of the unit, the
other
end to the AC100~240V wall outlet.
Connecting to External AV Signal Source
Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the
external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear
panel of the unit to the external AV signal source.
After connection, turn on the power of the unit and the external AV si
gnal source and then press the
SOURCE button to shift to CVBS or S
-
VIDEO mode.
Note: the L/R audio input jacks can be used in the both CVBS and
S-
VIDEO
modes.
System Connections
- 12 -
Connecting to Ext
ernal AV Signal Source
YPbPr
Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to
the external AV signal source.
After connection, turn on the power of the unit and external AV signal source and then press the
SOURCE button to shift to
Component
mode.
Connecting to External AV Signal Source
SCART
Use the SCART cable to connect the SCART input Jacks on the rear panel of the unit to the
external AV signal source.
After connection, turn on the power of the unit and external AV signal source and then press the
SOURCE button to shift to
SCART
mode.
System Connections
- 13 -
Connecting to External AV Input Device
AV Output
Use the audio and video cable to connect the AV output jacks on the side panel of the unit to the
external AV input device.
After connection, turn on the power of the unit and external AV input device and then press the
SOURCE button to shift to
CVBS
mode.
Connecti
ng to Earphones
This unit can be connected to an earphone for listening
to
music privately. See the figure
below
for
details:
After
connecting to the earphone
s
, the internal speakers will turn off automatically.
System Connections
- 14 -
Connecting to PC
The unit can be connected to
a
PC (person computer) via the VGA cable
.
Follow the
steps and the
figure below to connect:
1.
Connect one end of the
VGA cable
to the VGA input jack on the rear panel of the unit.
2.
Connect the other end to the PC.
3. Connect
one end of the audio cable to the PC audio input jack on the rear panel of the u
nit.
4. Connect
the other end to the PC audio output jack.
5. Please set the PC s resolution at 1024x768@60Hz
After connection, turn on the unit and the PC and then press the SOURCE button to shift to VGA
mode.
System Connections
Connecting to TV Antenna
- 15 -
This unit can be connected to the TV signal input source via the TV jack on the rear panel.
After connection, turn on the power of the
unit.
Then press the SOURCE button to shif
t to TV mode.
After connecting to the antenna, turn on the unit, and go on with program searching, you can
follow the below steps to select channels:
1.
For 0~9 channel:
Press
the number buttons to select the channel X, wait several seconds and it will go to the
selected channel.
Or press the number button to select channel X, and then press the /+10 to go to the
selected channel immediately.
Or press the number buttons to input
00X
, it will go to the selected channel
immediately
.
2.
For
10~99 channel:
Press
the number buttons to select channel
XX
, wait three seconds and it will go to the selected
channel.
Press
the number buttons to select channel
XX
, and then press the
/+10 button to enter the
selected channel.
Or press the number bu
ttons to input
0XX
, it will go to the selected channel
immediately
.
3.
For
100~199 channels:
Press
the number buttons to select channels
XXX
, and it will go to the selected channel.
* X is the channel number.
TV Function
- 16 -
Preparations
1. After connection, press the POWER button to turn on the power. (
If
it is turned on, the power
indicator is blue.)
2.
Press
the SOURCE button to shift to TV mode. You can go on with the follo
wing operations:
Image Setting
Note:
This item is only available when there is signal input.
TV Function
Scheme Setup
Press the
button to select
Scheme
and
press the ENTER button to enter. Press the
button to select the desired
item and press
th
e ENTER button to confirm your selection.
Press
the
MENU
button to return to the previous
menu.
Picture Setup
Press the
button to select
Picture
and
press the ENTER button to enter. Press the
button to select the desired
item and press
the ENTER button to confirm your
selection.
Press
the
MENU
button to return to the previous
menu.
Press the MENU button once to enter the setup
menu.
Press
the
button to select
Image
and
press the ENTER button to enter the menu
shown on the right.
In the
Image
setup menu, press the
button
to select the desired item. Press the ME
NU
button to return to the previous menu.
- 17 -
Contrast Setup
Press the
button to select
Contrast
and p
ress
the
button to adjust the value. Press the
MENU
button to return to the previous menu.
Hue Setup
Press the
button to select
Hue
and
press the
button to adjust the value.
Press
the
MENU
button to return to the previous
menu.
Note:
This item is only available
in
SCART,
CVBS, S
-
VIDEO
and
Componen
t modes.
Saturation Setup
Press the
button to select
Saturation
and press the
button to adjust the value.
Press
the
MENU
button to return to the previous menu.
Sharpness S
etup
Press the
button to select
Sharpness
and press the
button to adjust the value.
Press
the
MENU
button to return to the previous menu.
Advanced Setup
Press the
button to select
Advanced
and
press the ENTER button to enter.
In the menu, press
the
button to select the desired item and then press the ENTER button to
confirm.
Press
the
MENU
button to return to the previous menu.
Note:
This item is only available
in
SCART,
CVBS, S
-
VIDEO
and
Componen
t modes.
TV Function
Brightness Setup
Press the
button
to select
Brightness
and p
ress
the
button to adjust the value. Press
the MENU button to return to
the previous menu.
- 18 -
Audio Set
ting
Volume Setup
Press the
button to select
Volume
and press the
button to adjust the level.
Press
the
MENU
button to return to the previous menu.
Bass Setup
Press the
button to select
Bass
and
press the
button to adjust the level.
Press
the
MENU
button to return to the previous menu.
Treble Setup
Press the button to select
Treble
and press the
button to adjust the level. Press the
MENU
button to return to the previous menu.
Balance
Setup
Press the
button to select
Balance
and press the
button to adjust the level.
Press
the
MENU
button to return to the previous menu.
Auto Volume Setup
Press the
button to select Auto Volume and press the ENTER button to access
the
menu.
Press t
he
button to select
On
or
Off
and press
the
ENTER button to confirm.
Press
the
MENU
button to return to the previous menu.
TV Function
Press the MENU
button once to enter the setup
menu.
Press
the
button to select
Audio
and
press the ENTER button to enter the menu
shown on the right.
In the
Audio
setup menu, press the
button
to select the desired item. Press the MENU
button to return to the previo
us menu.
Sound Mode Setup
Press the
button to select Sound Mode
and press the ENTER button to enter.
Press
the
button to select the
desired
item and
then press the ENTER button to confirm your
selection. Press the
MENU button to return to
the previous menu.
- 19 -
Timer Setting
Setup Setting
TV Function
Press the
MENU
button once to enter the setup
menu. Press the
button to select
Timer
and
press the ENTER bu
tton to enter the menu
shown on the right.
In the
Timer
setup menu, press the
button
to select Off, 15Min, 30Min, 45Min, 60Min,
75Min, 90Min, 105Min or 120Min. Press the
MENU button to return t
o the previous menu
Press the
MENU
button once to enter the setup
menu. Press the
button to select
Setup
and
press the ENTER button to enter the m
enu
shown on the right.
In the
Setup
menu, press the
button to
select the desired item. Press the
MENU
button to return to the previous menu.
Tuner/Channel
Press
the
button to select the
Tuner/Channel
and press the ENTER
button to enter the menu shown on the
right. Press the
button to select the
desired item. Press the
MENU button to
return to the previous menu.
- 20 -
Auto Scan
Press
the
button to select the
Auto Scan
and press the ENTER button to start auto scan. The
screen will display following:
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and
memorize the programs in sequence automatically.
During tuning, press the MENU button to exit the auto scan mode.
TV Function
Prog Organizer
Press
the
button to select the
Prog Organizer and
press the
ENTER button to enter the menu
shown on the right.
In the
Prog Organizer
setup menu,
press the
button to select the
desired item. Press the
MENU
button to return to the previous
menu.
Country
Press
the
button to select
the
Country
and press the
ENTER button to enter the menu
shown on the right. Press the
button to select the desired
item. Press the MENU bu
tton to
return to the previous menu.
- 21 -
Channel Name
Press
the
button to select the Channel Name and press the ENTER button to enter.
Then
press the
button to select letters or press the number button to input numbers. Press the
MENU
button to return to the previous menu.
Skip
Press
the
button
to select
Skip
and press
the
ENTER button to activate
or cancel this function
.
Press the MENU button to return to the previous
menu
.
Swap
Press
the
button to select Swap from Ch and press the ENTER button to enter. Press the
number buttons to select program number. Repeat the above operations to Swap To Ch. Then
Press the
button
to select
Perform Swap
and press
the ENTER button
to confirm.
Search
Press the button to select
Search
and press the
or
to start searching forward or
backward
.
Press the MENU but
ton to return to the previous menu.
Color System
Press the button to select Color System and press the ENTER button to enter. Press the
MENU button to return to the previous menu.
Fine Tune
Press the
button to select
Fine Tune
and
press the ENTER b
utton to
enter
. Press the
or
controls to start fine tuning forward or backward. Press the MENU button to return to the previous
menu.
This feature allows for minor adjustments to the integrated electronic tuner s ability to tune in weak
broadcast signa
ls or where applicable solve minor irregularities in cable channel tuning parameters.
TV Function
Manual Install
Press
the
button to select the
Manual Install and
press the
ENTER button to enter the menu
shown on the right.
In the Manual Install
setup menu,
press the
button to select the
desired item. Press the
MENU
button to return to the previous
menu.
- 22 -
CH NO
Press the button to select CH NO and press the ENTER button to
enter
.
Press the number
buttons to enter the channel nu
mber.
Press the MENU button to return to the previous menu.
Store
Press the
button to select
Store
and
press the
ENTER button to
store the above operations.
Note:
The
CH NO
and
Store
items only
apply
when the program is
stored
.
Facto
ry Reset
Press
the
button to select the
Factory Reset
and
press the ENTER button to enter. Press
the
button to select
Yes
or
No
and press the ENTER button to confirm.
Press the MENU button
to return to the previous menu.
SCART Mode
Press the
button to select
SCART Mode
and
press the
ENTER
button
to
enter
.
Press the
button to select
Auto
or
Manual
and press the ENTER button to confirm.
Press
the
MENU
button
to return to the previous
menu
.
Encrypt Box
Press the
button to select
Encryp
t Box
and
press the
ENTER
button
to
enter
.
Press the
button to select
Yes
or
No
and press the ENTER button to confirm.
Press
the
MENU
button to
return to the previous
menu
.
NICAM Function
Language
Press
the
button to select the
Language
,
press the ENTER button to enter
the setup, press the
button to select
item. Press the
MENU button to return to the
previous menu.
- 23 -
The unit support NICAM fun
ction under TV mode.
Under NICAM TV broadcast:
1.
When
receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Stereo and
Mono
and the screen will
display
the following
:
2.
When
receiving bi
lingual
audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among Nicam I, Nicam II, Nicam I+II and
Mono
and the screen will display
the following
:
3.
When
receiving mono audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Mono and
Mono
. And the screen will
display the following:
Under A2 TV broadcast:
1.
When
receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between
Stereo
and
Mono
.
2.
When
receiving bi
lingual
audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among
I, II
and
I+II
.
3.
When
receiving mono a
udio signals, press the STEREO/AUDIO button on the remote control to
display sound track
Mono
on the screen.
DVD Playback
Operation
Preparation
After connections, turn on the
unit
and select the relevant video input before
p
layback.
Disc Loading Steps:
- 24 -
1.
Press the POWER button to turn on the power. Press the SOURCE button and select DVD,
press the ENTER button to confirm and shift to DVD mode.
2.
Insert the disc with its printed side. (Referring to the picture below.)
3.
Easily put
the disc into the disc tray
.
4.
The disc is automatically pulled into the disc tray,
the
player will play it automatically in DVD
mode.
Warning:
Do not play damaged discs that may damage the player s lens.
DVD Playback
Auto D
VD Function
Whether it is in DVD mode
or not
, when inserting disc into the disc tray, it will shift to DVD mode and
start playback automatically, and when the disc is injected, it will return to the prior mode
automatically.
R
egion
Code
DVD players and di
scs are coded by region. These regional codes must match the play
ed
discs. If
the codes don t match, the disc cannot
be
play
ed
. This player s default code is region 2.
Play
Press the PLAY button to start playback. Press the
STOP
button
once
on the remote control to
stop
playback
, and press
the PLAY button
again to resume playback.
DVD Playback
Operation
Stop
Press the
STOP
button once to stop playback and press the
PLAY
button to resume normal
playback
. Press the stop button
twice
repeatedly
to stop playback completely.
- 25 -
Pause
Press
the
PAUSE
but
ton
once
to pause the playback; press it repeatedly to start step-
by
-
step
playback.
Press
the
PLAY
button to resume normal playback.
Previous
and Next
Press
the
button
to go to
the next chapter. Press the
button once to return to the
beginning
of
the current chapter or track; press it twice to go to the previous chapter.
Fast Playback
Press the
or
FWD/REV SCAN button on the remote control to activate fast backward or
for
ward
playback
.
SLOW
During DVD disc playback, press the SLOW button on the remote control to start slow playback.
During
slow playback, press the PLAY button to resume normal playback.
Repeat
Use the REPEAT button
repeatedly
to repeat a chapter, title
or
all
.
Some discs do not support the repeat function.
A-
B Repeat
During DVD disc playback, press the A-B button to select the segment that you want to play
repeatedly.
Press
the A
-
B button
a
first time to set the
beginning
point
A
, press the A
-
B butto
n again to set the
ending point
B
and it will play the segment repeatedly. Press the A
-
B button
a
third time to cancel
the repeat segment.
Menu
Normally there is a selecting menu for DVD discs. You can press the
red
MENU button to enter the
menu, and u
se the direction buttons to highlight an item.
Then pr
ess the
ENTER
button to
confirm
.
Title & Chapter
Normally there are several titles on a DVD disc, and several chapters (sections) in a title. You can
select any title or chapter quickly by entering th
e relevant number.
Language (Audio)
There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc
you can use
press the AUDIO button on the remote control
to select a language.
DVD
Playback Operation
Subtitle
The DVD player can support multiple kinds of subtitles. When you play a multi
-
subtitle disc you can
press the SUBTITLE button on the remote control
to select different subtitles.
- 26 -
GOTO
During DVD disc playback, press the GOTO button on the remote control once, there will be a
menu displayed on the screen. You can set or select items according to your preference. Use the
direction buttons to select items and press the ENTER button to enter and use the
direction buttons to select the desired it
em. Press the
direction button to return. When select the
Title
/
Chapter
, TT Time/CH Time
, use number buttons to input desired title
/chapter
number time
.
Some DVD discs do not support the search function.
Various Camera Angles
The movies on some DVDs have been recorded from various camera positions. This lets you enjoy
the same scene from different perspectives. In this case you ll usually find a marking on the DVD
sleeve.
When playing a DVD containing various camera angles the camera symbol appears on the screen
.
Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be
adjusted in 1
2 seconds.
CD Playback
The pl
ayer will play all tracks on a CD disc by default. You can use the
and
(PREV/NEXT skip)
buttons, or number buttons to select a track.
Stop
Press the
STOP
button once to stop playback and press the
PLAY
button to resume normal
playback
. Press this
button twice
repeatedly
to stop playback completely.
Pause
Press
the
PAUSE
but
ton
to pause the playback
and then press the PAUSE button
again
or
PLAY
button to resume normal playback.
Previous and Next
Press
the
button once to go the beginning of thi
s track. Press twice repeatedly to go the previous
track.
press the
button
to play from the
beginning
of
the
next
t
rack.
DVD Playback
Operation
Fast Playback
Press the
or
FWD/REV SCAN button on the remote control to activate fast backward or
forward
playback
.
- 27 -
Repeat
Press the REPEAT button
repeatedly
to repeat
Track
,
All
or
to cancel repeat.
Some discs do not support the repeat function.
Audio
During CD playback, press the AUDIO button on the remote control to sele
ct the audio output mode:
Mono Left, Mono Right, Mix
-
Mono and Stereo.
Goto
Press the GOTO button to access the
time
-
selected
state. You can select Disc Go To, Track Go To
or Select Track respectively by pressing this button repeatedly. Use the 0-9 buttons to enter the
desired time,
and then
the player will play from
the selected time.
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image and has low
loss in resolution. Hundreds of pictures can be stored on a disc
in this format. In order to view JPEG
photo albums, you can ask your film development company to make a PICTURE CD when they
develop your film.
Normal Playback
Insert a JPEG disc. For JPEG discs, there will be a root menu displayed on the screen. Use t
he
ENTER button and the direction button to select a submenu, and then use the
direction button
to select the contents.
Many discs have other contents besides pictures.
For Picture CD disc
s
, it will display the pictures automatically.
During playback,
press the
or
button to select picture.
Many discs have other contents besides pictures.
Stop
Press the
STOP
button
once
to stop playback and return to the preview menu
.
Press the
PLAY button to resume normal playback. Press this button twice
repeatedly
to stop playback
completely.
Pause
Press
the
PAUSE
button to pause playback, press the PAUSE button again or PLAY button to
resume playback
.
DVD Playback
Operation
Repeat
During playback, press the REPEAT button re
peatedly, and the repeat modes are Shuffle, Random,
Single, Repeat One, Repeat All and Repeat Off.
- 28 -
Previous and Next
During playback, press the
or
button to select picture.
Menu
Press the MENU
button
once
to stop playback and
return to the root menu
.
GOTO
During playback, press the GOTO button on the remote control once, use the number buttons to
input the file number.
Picture Rotation
Use the
buttons to rotate the picture.
Some
JPEG disc may not support
the
rotating function
.
USB and SD/MS/MMC Card Function
USB and SD/MS/MMC Card
Function
Preparation:
1.
Connect the unit to the power supply.
2.
Press
the POWER to turn on the unit.
3.
Press
the SOURCE button to shift to DVD mode.
- 29 -
4.
Insert the USB into the unit s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the below figure:
Make sure that files are stored in the USB and SD/MS/MMC card before connection.
5.
Press the CARD button to shift among disc playback, USB playback and SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
6.
Press the
buttons to select the folder and press the ENTER button to enter.
7.
Press the
buttons to select the desired track. Then press the PLAY
button
to start
playback.
8.
Press the
STOP
button to stop playback. Press the
button to return to the folder menu.
Note:
1.
The screen display will vary from disc to disc.
2.
Pull out the USB or SD/MS/MMC card directly after the files are p
layed.
DVD
System Setup
Preparations
1.
Connect
to the power supply and turn on the unit.
2.
Press
the SOURCE button to shift to DVD mode.
3.
Press the
SETUP
button on the remote control
to
display the settings menu. The m
enu includes
General
s
etup,
Audio
s
etup,
Video s
etup
, Preference and Password setup
.
00
:
00
00
:0
0
001
/
002
BAK
JPEG
- 30 -
4.
Press
the
direction buttons on the remote control to select a category. All the items in the
category will appear on the screen.
5.
Press
the
SETUP button again to
exit the setup.
General
Setup
Page
P
ress the
SETUP
button to enter the
General
setup menu
.
The
screen will display
as
the
below
:
TV Display
Angle Mark
DVD
System Setup
OSD
Lang
In the
menu,
Use the
direction buttons
to
select
the desired
it
em. Press the
ENTER
button to
enter the item.
Press
the
button to return.
1.
Press
the
direction buttons to select
TV
Display
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select items.
4.
Press
the ENTER button again to
confirm
selection and return.
1.
Press
the
direction buttons
to select
Angle
Mark
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select On or
Off.
4.
Press
the ENTER button again to
confirm
selection and return.
The item is used to select the OSD lang
uage.
1.
Press
the
direction buttons to select
OSD
Lang.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select items.
4.
Press
the ENTER button again to
confirm
selection and return.
- 31 -
C
aptions
Screen Saver
Last Memory
DVD
System Setup
Media Center
1.
Press
the
direction buttons
to select
Screen Saver
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select On or
Off.
4.
Press
the ENTER button again to
confirm
selection an
d to return.
1.
Press
the
direction buttons to select
Last
Memory
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select On or
Off.
4.
Press
the ENTER button again to
confirm
selection and return.
1.
Press
the
direction buttons
to select
Media Center
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select DVD,
USB or CARD.
4.
Press
the ENTER button again to
confirm
selection and return.
1.
Press
the
direction buttons
to select
Captions
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select items.
4.
Press
the ENTER button again to
confirm
selection and return.
- 32 -
Audio
Setup
Page
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select
Audio Setup Page, t
he
screen will display
as
the
below
:
Dolby Digital Setup
Dual Mono
DVD
System Setup
Dynamic
In
the
menu,
Use the
direction buttons
to
select
the desired
item. Press the
ENTER
button to
enter the item. Press the
button to return.
1.
Press
the
direction buttons
to select
Dolby Digital
.
2.
Press
the ENTER button to enter the setup, the
screen will display as left:
3.
In the menu, use the
direction buttons
to
select items.
4.
Press the ENTER button
to
enter
the setup.
Press the
button to return.
1.
Press
the
direction buttons to select
Dual
Mono
.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select items.
4.
Press
the ENTER button again to
confirm
selection and return.
1.
Pr
ess
the
direction buttons
to select
Dynamic
.
2.
Press
the ENTER button to enter the setup, the
screen will display as left:
3.
Press the ENTER button to enter.
4.
Use
the
direction buttons
to adjust the
value.
5.
Press
the ENTER button again to
confirm
setting a
nd return.
- 33 -
HDCD Setup
In the Audio Setup Page, use the
direction buttons to s
elect
HDCD Setup.
Press
the ENTER
button to enter the setup and the screen will display as below:
Video Setup
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select Video Setup Page, t
he
screen will d
isplay
as
the
below
:
DVD
System Setup
Video Quality Setup
Select
Quality
, press the ENTER button to enter the menu as below:
1.
In the menu, press the ENTER button
to
enter
the setup.
2.
Use
the
direction buttons
to select items.
3.
Press
the ENTER button again to
confirm
selection and return.
4.
Press the
button to return.
In the
menu,
Use the
direction buttons
to
select
the desired
item. Press the
ENTER
button to
enter the item. Press the
button to return.
1.
In the
menu,
Use the
direction buttons
to
select
the desired
item.
2.
Press the
ENTER
button to
enter the item.
3.
Press the
button to return.
- 34 -
Color
Brightness
Contrast
DVD System
Setup
Preference
Setup
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select Preference Page, t
he
screen will display the following:
1.
Press
the
direction buttons to s
elect
Color.
2.
Press
the ENTER button to enter the setup.
3.
Use
the
direction buttons
to select High,
Medium or Low.
4.
Press
the ENTER button again to
confirm
selection and return.
1.
Press
the
direction buttons to
select
Brightness
.
2.
Press
the ENTER button to enter the se
tup, the
screen will display as left:
3.
Use the
direction buttons to adjust the
level.
4.
Press
the ENTER button again to
confirm
setting and return.
1.
Press
the
direction buttons to
select
Contrast
.
2.
Press
the ENTER button to enter the setup, the
screen will display as left
:
3.
Use the
direction buttons to adjust the
level.
4.
Press
the ENTER button again to
confirm
setting and return.
- 35 -
Audio
Subtitle
Disc Menu
DVD
System Setup
Parental
In the
menu,
Use the
direction buttons
to
select
the desired
item. Press the
ENTER
button to
enter the item. Press the
button to return.
1.
Press
the
direction buttons to
select
Audio
.
2.
Press
the ENTER button to enter the setup,
see the left figure:
3.
Press
the
direction buttons to select audio
language.
4.
Press
the ENTER button again to
confirm
setting and return.
1.
Press
the
direction buttons to
select
Subtitle
.
2.
Press
the ENTER button to enter the setup,
see the left figure:
3.
Press
the
direction buttons to select
Subtitle language.
4.
Press
the ENTER button again to
confirm
setting and return.
1.
Press
the
direction buttons to
select
Disc
Menu
.
2.
Press
the ENTER button to enter the setup,
see the left figure:
1.
Press
the
direction buttons to select Menu
language.
2.
Press
the ENTER button again to
confirm
setting and return.
DVD discs equipped with the
parental function are
rated according to their contents and settings vary
from disc to disc. Depending on the disc, you can
lock out playback of the disc altogether.
1.
Press
the
direction buttons to
select
Parental
.
2.
Press
the ENTER button to enter the se
tup,
- 36 -
Default
Password
Setup
Press the SETUP button to enter the setup menu, then use the direction buttons to select
Password Setup Page, t
he
screen
will display
as
the
below
:
DVD
System Setup
Password Mode
1.
Press
the
direction buttons to
select
Default.
2.
Press
the ENTER but
ton, all the settings will
return to the default values
In t
he
menu,
Use the
direction buttons
to
select
the desired
item. Press the
ENTER
button to
enter the item. Press the
button to return.
1.
Press
the
direction buttons to
select
Password Mode
.
2.
Press
the ENTER button to enter the setup,
see the figure on the left:
3.
Press
the
direction buttons to select On or
Off.
4.
Press
the ENTER button again to
confirm
- 37 -
Password Change
Other Functions
External AV Input Functio
n
The unit has
an
external AV input
function
. It
supports
SCART,
CVBS, S-
VIDEO
and
Component
You can change the pas
sword by yourself.
1.
Press
the
direction buttons to
select
Password
.
2.
Press
the ENTER button to enter the setup,
see the figure on the left:
3.
Press
the ENTER button again to change the
password.
4.
According to the indication in the menu, Use
the number button
s to input the old password,
then input the new password, then input again
to confirm. The password has been changed
successfully
.
5.
The Default Password is 3308.
- 38 -
modes. Use the audio, video, SCART cable and S-Video cable to connect the unit to the external
AV signal source such as recorder, vidicon, satellite receiver or ga
me
console
etc. Then turn on the
unit and the external AV signal source.
Press
the SOURCE button to shift to the corresponding
mode.
Computer Screen Function
The TFT LCD screen of
the
unit can be used as the computer screen. Take the steps of connecting
t
he unit to the PC and then you can set up the menu.
You had better set the PC
s resolution at: 1280 x 768@
60
Hz
.
The operations of
these menus
in
SCART, CVBS,
S-
VIDEO
, Component and VGA modes are
the same with those in the TV mode. Please refer to the in
troduction in
TV Function
.
Note: Some of these menus are not available
in
these modes.
Troubleshooting
SYMPTOM
CHECK ITEM
- 39 -
The player cannot play.
Make sure
disc is inserted
M
ake sure
disc isn t loaded upside down.
Make sure
disc is
not
dirty or warped.
Make sure
the player s region code is the same as region code
of DVD disc.
Make sure water condensation has
not
occurred.
If it occurs,
take out disc and leave the player on for
at least one hour.
There is no sound.
Make sure
system connection is correct.
Make sure
the sound setup of DVD disc is correct.
Make sure
disc is
not
dirty or warped.
Clean or
replace the disc
.
Make sure the speakers are not muted.
In the TV mode, set
the correct sound mode.
There is no picture
Make sure the unit is turned on and the connections are
correct.
Make sure the power adapter is correctly connected.
Cannot continue to play and
play a section repeatedly.
Make sure
is not
in A
-
B
or other
re
peat status.
Make sure
disc is
not
dirty or damaged.
There is no picture or picture is
distorted
Check if the connections with the external AV signal source
are correct.
Correctly set the items in the picture menu.
Check if the video type input signal
is not corresponding to the
unit.
Make sure the unit is turned on and in correct video type.
The remote control does not
work.
Make sure there are
no
obstructions between the remote
control and the player.
Make sure
the remote control is pointing at the
player.
Make sure
batter
ies
are inserted
and
the polarity is correct.
Make sure
batter
y
is not
weak.
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurs,
unplug the power
-
supply cord from the out
let and plug it in again to reset the player.
If
the problems
persist, then please disconnect the power and consult a qualified technician.
Specifications
TFT
-
LCD
Resolution
1024 x 768
- 40 -
TFT
-
LCD Screen
Size
19 inches
Power
AC100
240V
50/60Hz
DC 12V
Power Consumption
<
48
W
Dimension
494
mm
×
184
mm
×
412
mm
LXWXD
Weight
About 10 K
g
Ambient Temperature
10~45
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories
.
Dolby and the double-
D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works.
©
1992
-
1997 Dolby Laboratories
, Inc
.
All rights reserved.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Lenco-DVT1901

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lenco DVT1901 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lenco DVT1901 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Lenco DVT1901

Lenco DVT1901 Gebruiksaanwijzing - Nederlands - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info