Handleiding Lenco Classic Phono TCD-2600 (pagina 12 van 92) (Nederlands, Duits, Engels, Frans, Spaans)

694852

Verklein

Vergroot

Pagina terug

1/92

Pagina verder

Rec

Select the RECORD button

You will need to position the needle on the record for a few seconds before the track starts, so that

you select the RECORD button at the beginning of your track.

Start playback on the USB turntable. You will see the waveform of the audio on the screen a

recording. You will hear the audio coming from the output of your computers soundcard.

No Audio?

selected and the speaker volume up on your computer.

Press Stop

Select the destination and file name for the project and click “Save”

Once finished recording, your screen should display your recording as below.

Recording

Select the RECORD button

You will need to position the needle on the record for a few seconds before the track starts, so that

you select the RECORD button at the beginning of your track.

Start playback on the USB turntable. You will see the waveform of the audio on the screen a

recording. You will hear the audio coming from the output of your computers soundcard.

No Audio?

selected and the speaker volume up on your computer.

Press Stop

SAVE YOUR FILE NOW by clicking on “File” followed by “Save Project”

Select the destination and file name for the project and click “Save”

Once finished recording, your screen should display your recording as below.

ording

Select the RECORD button

You will need to position the needle on the record for a few seconds before the track starts, so that

you select the RECORD button at the beginning of your track.

Start playback on the USB turntable. You will see the waveform of the audio on the screen a

recording. You will hear the audio coming from the output of your computers soundcard.

No Audio?

selected and the speaker volume up on your computer.

Press Stop

VE YOUR FILE NOW by clicking on “File” followed by “Save Project”

Select the destination and file name for the project and click “Save”

Once finished recording, your screen should display your recording as below.

ording

Select the RECORD button

You will need to position the needle on the record for a few seconds before the track starts, so that

you select the RECORD button at the beginning of your track.

Start playback on the USB turntable. You will see the waveform of the audio on the screen a

recording. You will hear the audio coming from the output of your computers soundcard.

No Audio?

selected and the speaker volume up on your computer.

Press Stop

VE YOUR FILE NOW by clicking on “File” followed by “Save Project”

Select the destination and file name for the project and click “Save”

Once finished recording, your screen should display your recording as below.

Select the RECORD button

You will need to position the needle on the record for a few seconds before the track starts, so that

you select the RECORD button at the beginning of your track.

Start playback on the USB turntable. You will see the waveform of the audio on the screen a

recording. You will hear the audio coming from the output of your computers soundcard.

No Audio?

go back to the preference menu and make sure you have “Software Play