b) During disc, SD/MMC, USB playback mode:
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it if the playing time is more
than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is less than 2 seconds.
Press the >>| or |<< button and hold to skip forwards or backwards, release to resume normal
playback.
6. BAND BUTTON
During radio mode, press the BND button briefly to select the radio broadcasting band you would like
to hear. The AM/FM band is toggled cyclically through the tuning bands:
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
7. POWER ON/OFF,MUTE BUTTON
When the unit is power off, the unit comes to ON by pressing any button on the front panel (except
the OPEN key ). It also can turn on the unit to insert a disc, SD/MMC card or USB stick into their slots
or socket. When the unit is power on, press and hold the power button, the unit goes into power off
mode.
This button serves to switch the MUTED state on/off.
Press this button to suppress the loudspeaker temporarily, and press again to resume listening. The
muted state will be also released when the MODE, SEL button is pressed and VOL knob on the front
panel is used.
8. APS BUTTON (Auto-storage /Preset scan)
During radio mode:
1) when long pressing for more than 1 second, the radio searches from the current frequency and
checks the signal strength level until 6 station are found. And then the 6 stations frequency are
preset to the corresponding preset memory numbered bank. The auto-storage operation is
implemented in the each selected band.
When the auto-storage operation is finished, the radio execute the Preset Scan.
2) when short pressing, the radio searches for each preset station in the current band and holds at that
preset number for 5 seconds with releasing mute, and then search again.
In disc mode, MMC/SD or USB mode, press APS button repeatedly to select TRACK SEARCH,
DIRECTORY SEARCH o rFIRST CHARACTER SEARCH mode.
In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest digit0 that the
MMC/SD card, USB or MP3 disc contain. Rotate the knob to select the number of the flashing digit
from 0 ~ 9. Then press SEL button to confirm the number and flash next smaller digit 0.With the
same means, select the number of the flashing digit. After finishing selecting the number of all
flashing digit, press SEL button to play the track of the selected serial number.
In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is not the root folder, it
will find a root folder named ROOT). Then rotate the knob to select your desired folder, Finally press
SEL button to play the first track of the folder.
In FIRST CHARACTER SEARCH mode, the LCD will display A- rotate the knob to select file's first
character by the order of A~Z and 0~9. Then press >>| or |<< button to select one file its first
characters is the selected one. Finally press SEL button to play the selected file.
