Handleiding Lenco Boost 6 (pagina 3 van 12) (Engels)

601866

Verklein

Vergroot

Pagina terug

1/12

Pagina verder

USER’S MANUAL

Boost-6

Bluetooth Stereo Speaker

with

Aux Input

NFC & Power Bank

Splash-proof

For more information: www.lenco.com

A. Warning

Don’ts

 Do not place naked flames, such as lighted candles on or near the

product.

 Do not place objects filled with liquids, such as vases on or near the

product.

 Do not use or store this product in a place where it is subject to direct

sunlight, heat, excessive dust or vibration.

 Do not use this product with wet hands.

 Do not clean this product with water or other liquids.

 Do not block or cover the slots and holes in the product.

 Do not push foreign objects into the slots or holes in the product.

 Do not attempt to open this product yourself. There are no user

serviceable parts inside.

 Do not allow children access to plastic bags.

Safety Instructions

Before using this product, read and follow all warnings and instructions.

 This product is not intended for use by young children. Young children

should be properly supervised.

 This product is intended for household use only and not for

commercial or industrial use.

 Do not expose to dripping or splashing.

 No naked flame sources, such as lighted candles, should be placed on

the product.

 Ventilation should not be impeded by covering ventilation openings

with items such as newspapers, table cloths, curtains and the like.

 Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position or by failure to follow any

other warning or precaution contained within this user manual will

not be covered by warranty.

 Never remove the casing of this apparatus.

 Never place this apparatus on the other electrical equipment.

We, suggest retaining the packaging in case for future transport of the

product.

WARNING:

 Never remove the casing of this apparatus.

 Never place this apparatus on the other electrical

equipment.

B. Outlook and Controls

Front View

Back View

Top View

Item

Description

AUX IN (3.5mm Jack, Stereo)

Power Switch ON – OFF

CTL Button (for Power Bank)

Type A USB Socket (DC OUT: DC 5V 1A/1000mA)

Micro USB socket (DC Input: DC 5V 2A/2000mA)

Foot Stand

MIC Position (for hand-free)

Button (for Bluetooth Searching)

/ Button (Play/Pause, Pick up/Hang up call/Last dialed, AUX)

Button (Volume down, Previous track)

Button (Volume up, Next track)

NFC Sensor Position (for Bluetooth pair)

Mode LED (3 in 1; Charge-Red, Bluetooth-Blue, AUX IN-Green)

Left Bass Radiator

Right Bass Radiator

Left Speaker

Right Speaker

Rubber Seal Cover (for splash-proof)

C. About the rechargeable Battery

This Bluetooth Speaker has an internal, non–user-replaceable battery.

For best results, the first time you use this Bluetooth Speaker, let it charge

for about 6 ~ 8 hours or until the charging LED indicator light from On to

off which show you the battery is fully charged.

For maintain the battery life and performance, if speaker isn’t used for

a while, the battery might need to be recharged. Charge the battery at

least once every month.

To charge the rechargeable battery:

1. Connect the Bluetooth Speaker’s “Micro USB socket (5)” with the

USB power charger which able to provides output at least DC 5V 2A

for charge connection via the original USB cable (supplied).

2. The “Charge (13)” LED will turn On in red, the battery is in charging.

3. The “Charge (13)” LED will turn Off when the rechargeable battery is

fully charged.

4. Disconnect the USB cable when it is done.

Use a USB/AC adaptor with following specs 5 volt , 2 ampere . When

using lower ampere like 0,5A. or 0,8 A. , the charging time will be 3 or 4

times longer.

Important:

The device design with high power of audio output and power bank

function, so it does not recommend you connect to computer’s USB port

for charging the Bluetooth Speaker, as well as you use the Bluetooth

operation at the same time. It needs longer time to charge the battery

fully, and the Bluetooth Speaker will result works unstable or not proper

working especially the internal battery energy is in lower level.

D. Power ON and Pairing

1. Slide the “Power Switch (2)” to “ON” position to turn On the device,

the Bluetooth searching / reconnect function are open;

2. A series of tones will sound and the “Bluetooth (13)” LED is fast

blinking in blue.

3. Then, activate the Bluetooth function in your Bluetooth device (such

as Mobile Phone or Personal Computer); the device will enter to

Bluetooth searching mode automatically, if not, tap the relate

selection to manually enter to searching mode. (refer to your device’s

manual when necessary)

4. Your Bluetooth device should show “Lenco Boost-6” in list, and then

select it for pairing. Waiting for some seconds and you will see

connected message as shown on your mobile device. (For some

Bluetooth devices, you may need to input “0000” as pairing

password)

5. If pairing is successful, a tone will sound and the “Bluetooth (13)” LED

will keep lighting blue from blinking.

6. Now, you can start to music play from the mobile device by its music

player program.

7. Slide the “Power Switch (2)” to “OFF” position to turn Off the device

when it is not in use.

E. Disconnect from paired device

1. To disconnect with paired device and for better result, turn Off the

Bluetooth Speaker by slide the “Power Switch (2)” to “OFF” directly;

2. Or, you can choose “Disconnect” from Bluetooth paired device list on

your mobile device;

3. In this case; the Bluetooth Speaker will turn back into “Searching /

Pairing” mode in seconds, a series of tones will sound and the

“Bluetooth (13)” LED will turn to fast blinking in blue from lighting.

4. Now, you can process for new mobile device pair or power Off the

Bluetooth Speaker if you wanted.

F. Auto reconnect with paired device

1. Every time you turn On the Bluetooth Speaker’s power; it will firstly

searching for the mobile device which has been paired previously and

still in record;

2. The Bluetooth Speaker will reconnect this mobile device as priority if

it in Bluetooth searching device mode and in connection range.

3. If no device found in some seconds, then the Bluetooth Speaker will

automatically turn into pairing mode.

4. Now you can process for new mobile device pair. (refer to item D.3 ~

D.6 methods)

G. Switch to new pairing from connected mode

1. In Bluetooth connected mode, you can switch the Bluetooth Speaker

into Bluetooth searching mode for paring with the new device at any

time you desired;

2. Press and hold the “ (8)” button until a series of tones sound and

the “Bluetooth (13)” LED will turn to fast blinking in blue from

lighting.

3. Now you can process for new mobile device pair. (refer to item D.3 ~

D.6 methods)

H. Use NFC for fast Bluetooth pairing

a. On Bluetooth Speaker:

1. Slide the “Power Switch (2)” to “ON” position.

2. Make sure that the NFC detection mark “ (12)” is at the right

place to touch.

b. On Mobile Phone:

1. Make sure that the mobile phone has the NFC function turned on and

the screen is active (unlocked).

2. Touch the mobile device NFC sensor on the Bluetooth Speaker’s NFC

detection mark. Keep touching until the mobile device vibrates and or

sound. (When the devices connect, some mobile phone may pop up a

dialog box to confirm on it screen)

3. After pairing is successful; from Bluetooth speaker, a tones will sound

and the “Bluetooth (13)” LED will keep lighting in Blue from blinking.

4. To disconnect the Bluetooth Speaker from an NFC connected phone,

touch it with the mobile device again.

Hint: If you cannot connect the unit, try the following:

 Move the mobile phone slowly over the “NFC” mark of the Bluetooth

Speaker.

 If the mobile phone is in case (especially metal), remove it from the

case.

I. Bluetooth Music Playing Controls (two way function)

a. On your Bluetooth Device:

1. Switch to music player menu and choose a music to start the play

from playlist or by using “ / ” button/icon. Play/Pause the

playing music by using “ / ” button/icon.

2. To adjust the volume level by using the device’s volume control

“Down / Up” button/icon on your Bluetooth device. (refer to your

device user’s manual when necessary)

b. On Bluetooth Speaker:

1. In playing music, press “ / (9)” button to pause the playing music.

Press it again to resume.

2. Press and hold the “ (11)” button to increases the volume level.

3. Press and hold the “ (10)” button to decreases the volume level.

4. When maximum or minimum volume is reached, a beep sound will

be heard.

5. Press the “ (11)” button to change next music file play.

6. Press the “ (10)” button to change previous music file play.

J. Hand Free Function

1. When there is an incoming call during Bluetooth music playing mode;

2. The ringing sound will up and the playing music will pause

automatically.

3. Press and hold “ / (9)” button to reject the call if you want. Or,

4. Press “ / (9)” button to pick up the call.

5. Now you have hand free function with the Bluetooth speaker.

6. Press “ / (9)” again to hang up the call when finished. And the

paused music will resume automatically.

Tip: speak to the “MIC (7)” direct with distance in 30 ~ 60cm to get the

best speakerphone performance when necessary.

K. Redial For Last Call Function

1. To redial for last called number by the Bluetooth Speaker, even it is in

music playing mode.

2. Press twice the “ / (9)” button to enter into redial function, the

playing will pause and switch to hand free function for redial.

3. Press the “ / (9)” Button again to hang up the redial call.

4. Make sure that your mobile phone has have last dial call used, if not,

the redial for last call function cannot be activated.

L. Low Power Reminder And Auto Sleep

1. The Bluetooth Speaker will send tones sound out from speaker by

every 5 minutes. When you heard this reminder, please connect the

device to the USB power for charging, if you still want to use the

device.

2. If not, the Bluetooth Speaker will power Off to sleep mode when the

battery is keeping low energy level in some minutes.

3. In this case, the device cannot be turned On, until you recharging the

battery at least 10 ~ 15 minutes, because the rechargeable battery

has not enough energy.

M. Use AUX IN Function

In this design, the Bluetooth module give priority to Bluetooth

function as master, the AUX In function is become slave, if Bluetooth has

been connected and in playing mode.

a. Use AUX In under power ON mode: (Bluetooth un-paired)

1. Make sure that the external device has switched on and controlled to

AUX output source with music playing.

2. Slide the “Power Switch (2)” to “ON” position to turn on the device;

3. Connect the Bluetooth Speaker’s “AUX IN (1)” jack with an external

device’s “Earphone / AUX / LINE” jack output through the Audio

cable.

4. The mode will switch to “AUX IN” function automatically and the

“AUX IN (13)” LED will turn On in green with blinking blue. Now, the

Bluetooth Speaker’s AUX In function is in use.

b. Use AUX In under Bluetooth music playing mode:

1. In Bluetooth music playing mode, connect the Bluetooth Speaker’s

“AUX IN (1)” jack with an external device’s “Earphone / AUX / LINE”

Output through the Audio cable. The “AUX In (13)” LED will turn On in

green with blue.

2. In this case, the Bluetooth Speaker allow to switch over in between

the “AUX In” mode and “Bluetooth music playing” mode by press the

“ / (9)” button or tap the icon on your mobile device.

3. However, the waiting time of mode change will taking about 3 ~ 10

seconds depending on mobile phone’s OS. (example: 3 seconds for

Android’s mobile device or 10 seconds for iOS’s devices)

4. Or, press and hold the “ (8)” button to quick switch to AUX IN mode

if you want. The Bluetooth will disconnect automatically.

5. For Bluetooth reconnection, tap “Lenco Boost-6” in paired devices list

on you mobile device.

Note: the Bluetooth is staying at controlling mode at behind, so that the

Bluetooth mode LED is keep lighting or blinking in blue)

c. To adjust volume level:

1. Pressing or press and hold “ (10)” button to decrease the volume.

2. Pressing or press and hold “ (11)” button to increase the volume.

N. Splash-proof Handling

1. Make sure that the splash-proof “Rubber Seal Cover (18)” it tightens

closed at the right position.

2. The Bluetooth Speaker can handle a brief jet of water on its surface

(IPX4 Splash-proof). However, it should never be operated under

running water and under no circumstance it should never be fully

immersed in water.

3. Always wipe the Bluetooth Speaker surface thoroughly if it becomes

wet with moisture or water splashes. This will help to prevent the

internal parts of the unit from entry of water and possible moisture

damage.

O. Power Bank Function (Charge Output DC 5V 1A max.)

Before use the power bank function, make sure that the Bluetooth

Speaker’s internal battery is full charged. Or, we recommended, it has

enough energy, about 51 ~ 75% or more, for charge the external device.

a. To check the battery remaining energy level:

1. Press and hold the “CTL (3)” button, the “Charge (13)” LED will light

and or flashes in seconds for show the battery energy remaining

levels.

2. The “Charge (13)” LED will illumines as follow methods;

- Long light for few seconds if battery about 90 ~ 100% energy.

- Flashes 3 times then light off if battery about 51 ~ 75% energy.

- Flashes 2 times then light off if battery about 26% ~ 50% energy.

- Flashing fast then light off if battery below 25% energy.

b. Power Bank Connection and Control:

1. The “Type A USB (4)” socket is for charge output connection with DC

5V 1A (max.) rating power.

2. The Bluetooth Speaker’s power bank charge output designed with

auto detect feature, it will turn ON the charge output function when

you connected the external device’s charge input into the “Type A

USB (4)” socket.

3. Besides, the “CTL (3)” button also is a control to turn ON the charge

output function manually for some needs. However, the charge

output function will turn OFF automatically in 30 seconds, if no

device has connected.

4. Press the “CTL (3)” button can turn ON the charge output function

manually.

c. To charge your mobile device:

1. Plug the USB cable into the Power Bank’s “Type A USB” socket and

then connect the other end of USB cable to the external device. The

power bank’s charge output function will turn ON automatically.

2. The “Charge (13)” LED flashing once at every 3 seconds; the external

device is in charging.

3. After the external device is fully charged, remove the USB cable, the

charge output supply will be cut off automatically in 30 seconds.

Important: The Power Bank function cannot activate If the battery level is

lower than 25% even you try to turn ON the power bank’s charge output

function.

P. Trouble Shooting

No power

 Check battery is it charged with enough energy.

 Check whether the device is in power OFF mode.

No sound

 Check whether volume level is in lower position on

your Bluetooth speaker and mobile device.

 Make sure that your Bluetooth device is within the

effective operation range.

 Check whether the Bluetooth device is paired.

 Check whether the Bluetooth device show

connected.

 Check if you have selected the correct audio

source.

No response from

speaker

 Restart the speaker by power Off and On.

Q. Specification

Dimension

250 mm (L) x 90 mm (D) x 101.5 mm (H)

Weight

850g (Approximate)

Bluetooth

Specification

V2.1 + EDR

Supported Profile

A2DP, AVRCP, HSP

Connection Distance

In 10 meters (open area)

Built-In Battery

Lithium 7.4V 4000mAh

(3.7V, 8000mAh; type 18650 x 4pcs)

Playing Time: 8 ~ 10 Hours

(at 75 ~ 80 % of volume setting)

Power Source Input

Micro USB Port

DC 5V, 2A / 2000mA

Power Bank Output

Type A USB Port

DC 5V, 1A / 1000mA

Audio

Output Power

5W (RMS) x 2 (4 Ohm)

Frequency

Responses

20Hz to 20,000Hz

I/O

Audio In Link

800mV RMS, 10K Ohm

NFC Connect

For Bluetooth pair

Splash-proof

IPX-4

Operating Temperature

0 to 40℃

R. Disclaimer

Updates to Firmware and/or hardware components are made

regularly. Therefore some of the instruction, specifications and pictures in

this documentation may differ slightly from your particular situation. All

items described in this guide for illustration purposes only and may not

apply to particular situation. No legal right or entitlements may be

obtained from the description made in this manual.

S. Service and Support

For information: www.lenco.com

For support: http://lencosupport.zendesk.com

Lenco helpdesk:

Germany 0900-1520530 (Local charges)

The Netherlands 0900-23553626 (Local charges + 1ct p/min)

Belgium 02-6200115 (Local charges)

France 03-81484280 (Local charges)

The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.

When contacting Lenco, you will always be asked for the model and serial

number of your product. The serial number can be found on the back of

the device. Please write down the serial number below:

Model: Boost-6

Serial number:_________________________________

Lenco offers service and warranty in accordance to European law, which

means that in case of repairs (both during and after the warranty period)

you should contact your local dealer.

Important note: It is not possible to send products that need repairs to

Lenco directly.

Important note: If this unit is opened or accessed by a non-official service

center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional

use, all warranty obligations of the manufacturer will be voided.

T. Recycling

This symbol indicates that the relevant electrical product

or battery should not be disposed of as general household

waste in Europe. To ensure the correct waste treatment of

the product and battery, please dispose them in accordance

to any applicable local laws of requirement for disposal of

electrical equipment or batteries. In so doing, you will help

Lenco Boost 6 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Lenco Boost 6

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info