792735
53
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
53
The appliance does not automatically switch
to the sealing procedure after vacuuming:
A negative pressure sensor is installed in this
appliance. The appliance does not change to
the sealing procedure automatically if the
vacuum pressure in the bag cannot reach the
specied vacuum pressure.
Check the sealing strips and the foam seals
under the cover for soiling and correct posi-
tion. Wipe clean and smooth them again.
Try again.
Make sure that the foam seals on the cover
and on the base around the vacuum chamber
do not break or distort. Take this out of the
tray, wash and dry it thoroughly. Or replace it
with a new foam seal (obtain this from your
nearest service centre).
The vacuum bag may have a leak. For testing,
seal the bag with a little air, immerse it in
water and apply pressure. Bubbles are an
indication that there is a leak. Seal the bag
again or use another one.
Leaks may be along the seal that are caused
by folds, crumbs, grease of liquids. Open the
bag again, wipe out the top end of the bag
and smooth it along the sealing strip before
re-sealing.
Air enters the bag again after sealing:
Leaks may be along the seal that are caused
by folds, crumbs, grease of liquids. Open the
bag again, wipe out the top end of the bag
and smooth it along the sealing strip before
re-sealing.
Natural gases may be released or result in
fermentation of food products (such as fruit
and vegetables). Open the bag and if you
believe that the food is beginning to deterio-
rate, and throw it away. Insufcient cooling
or uctuating temperatures in the fridge may
lead to the food products deteriorating.
If the food product has not deteriorated, these
should be consumed immediately.
Check the bag for damage or a hole that may
allow the vacuum to escape.
Do not vacuum hard objects with sharp tips.
Pad sharp edges with paper towels in order to
avoid damage.
The bag melts:
If the sealing strip or the sealing element
overheats and brings the bag to melt, the
cover may have to be raised to allow the
sealing strip of the heating element to cool
down for a few minutes.
A vacuum is not generated in the container:
Make sure that the connecting hose is con-
nected tight with the appliance and container.
At the beginning of the vacuuming procedu-
re, press on the container lid OR on the hose
adapter in order to prevent the container seal
from leaking.
Check if there is any damage. If yes, replace
the damaged parts with new ones.
Check the function of the vacuuming appli-
ance.
Make sure that the edge of the container is
clean enough. If all situations mentioned
above have been ruled out, please contact
the service centre specied.
GB
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Leifheit Vacu Power 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Leifheit Vacu Power 100 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 1.49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info