594984
57
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
SETTINGS FOR CAMERA-CONTROLLED
AUTOMATIC FLASH MODE
Once the flash unit you are using has been turned on and set to the appropri-
ate mode for TTL operation, on the Leica S
1. the exposure metering must first be performed by gently pressing the
shutter release button before taking each flash picture, so that the display
in the viewfinder shows the shutter speed or switches over to the light
balance. If this stage is missed out by fully depressing the shutter release
button in one quick movement, the flash unit will not fire even if required.
2. set the preferred exposure mode or the desired shutter speed and/or
aperture. The faster flash sync speed must be taken into account as this
determines whether a "normal" flash is fired or an HSS flash.
TTL FLASH MODE
Fully automatic, i.e. camera controlled, TTL flash operation is available with
the Leica S when using system-compatible flash units (see p. 52), and in all of
the camera's exposure modes.
Automatic illumination control is also provided. This means that in order to
ensure a balanced relationship between flash and available light at all times,
the flash power is reduced by up to 1
2
/
3
EV as ambient brightness increases
(fill-in flash). However, if the available brightness requires a faster shutter
speed than the set sync speed (
1
/
125
s for the focal plane shutter,
1
/
1000
s for
lenses with central shutter) or it is set manually, the camera will automatically
switch a system-compatible flash unit to linear flash mode (HSS, see next
section).
In addition, the Leica S transfers the set sensitivity and aperture to the flash
unit. Provided it has the right displays, the flash unit can then automatically
adjust its displayed range accordingly.
Notes:
The settings and functions described in the following sections relate exclu-
sively to flash units that are system compatible to the Leica S.
An exposure compensation set on the camera (see p. 39) only influences
the measurement of available light.
If you want to simultaneously use compensation of the TTL flash exposure
measurement in flash mode – in parallel or in the opposite direction, you
must make this additional setting (on the flash unit).
More details of ash use, in particular for other ash units not specially
adapted to the Leica S and for different flash modes can be found in the
respective instructions.
HIGH SPEED SYNC MODE
Fully automatic, i.e. camera controlled flash operation is available with the
Leica S when using system-compatible flash units (see p. 52), with all shutter
speeds and in all of the camera's exposure modes. It is automatically activat-
ed by the camera if the selected or calculated shutter speed is faster than the
sync speed, i.e. ≤
1
/
180
s for the focal plane shutter. If the flash unit is set cor-
rectly, this change does not require any further action by the photographer.
STROBE FLASH MODE WITH SYSTEM COMPATIBLE FLASH UNITS
This flash method, in which several flashes are emitted in succession during
an exposure, is possible in all of the camera's exposure modes.
In
and modes, the camera automatically sets the necessary shutter
speed for the selected flash number and frequency. If the required shutter
speed results in overexposure due to the available light, this is indicated by
the light balance (2.6b).
In
and modes, an excessively fast shutter speed is indicated by the shut-
ter speed display flashing (2.2a/3.12) in the viewfinder and in the top panel
display.
In such cases, exposure compensation can be carried out by changing the
number of flashes and/or the flash frequency and/or the aperture and/or
the shutter speed (with
and ).
For a successful strobe photograph, for example when several phases of one
sequence of movement are recorded on one picture, the operating range of
the flash unit, the number of flashes, the distance and of course the aperture
are of crucial importance. You can find information about this in the instruc-
tions for your flash unit.
Note:
The HSS flash mode results in shorter ranges.
54
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Leica S-E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Leica S-E in de taal/talen: Engels als bijlage per email.

De handleiding is 11,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Leica S-E

Leica S-E Gebruiksaanwijzing - Nederlands - 78 pagina's

Leica S-E Gebruiksaanwijzing - Deutsch - 77 pagina's

Leica S-E Gebruiksaanwijzing - Français - 78 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info