495489
18
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
18
1 Connect the signal cable to monitor, then turn on computer.
2. Connect the USB cable with monitor and computer.
3. Turn on the monitor (AC switch on).
4. Connect one side of USB cable (Type-B USB connector) on the
monitor side. See below picture. (Check “Connection” section
for exact location).
5. Connect the other side of USB cable (Type-A USB) to the USB
port on computer.
6. Wait for 5 seconds and the touch function is ready to go.
It can be activated by pen, fi nger, or any other pointer.
7. This touch monitor is Microsoft Windows 7 compatible. In order
to activate, go to
http://www.nextwindow.com/nextwindow_support/windriver.html
to download the latest driver.
Follow the direction in the NW Multitouch Device Driver
Installation Guide (part of the compressed fi le along with
the driver) to install the driver.
8. Once the driver is installed, restart the PC and the touch
function is ready to go with MS Windows 7.
9. Operating Systems Supported:
I. Microsoft Windows:
i. Windows 2000, XP, Vista, and 7: Plug-and-play
ii. Driver required to run dual-touch/gesture on
Windows 7 (works as a digitizer)
II. Mac OS: Plug-and-Play, Single touch only.
III. Linux: Supports Knoppix (based on Debian) distribution
with the following requirements:
i. Linux 2.6 kernel series
ii. Evtouch Touchscreen Driver
http://www.conan.de/touchscreen/evtouch.html
iii. Single touch only
10. 4-Point Calibration Procedure: (Note: no calibration is
required for fi rst time use, however, the touch panel might
be required for calibration over time depends on the usage)
I. Press the CAL button located next to the
USB connector (see page
8, item 4 for location) or press
the “Scroll Lock” key on the keyboard 6 times.
II. Wait for the beep sound, and the cursor will move to
near the upper left corner of the display automatically.
III. Place nger, gloved hand, or any other pointer on the
cursor, and stay for 2 seconds (a beep sound will occur
when the pointer is placed on the cursor). Then the cursor
will move to near the upper right corner automatically.
IV. Repeat the procedure of item III until all 4 points is
calibrated. (see image below for the places where
cursor appears).
V. Confi rm by tapping anywhere between the 4 points.
The calibration is completed and the touch monitor
is ready to be used now.
1. 2.
3.4.
8 Touch Operation
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Legamaster e-Screen FLEX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Legamaster e-Screen FLEX in de taal/talen: Engels als bijlage per email.

De handleiding is 8,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info