PowerBright-Laser PBL 3P
Recharging the (rechargeable) batteries: Connect charger/main unit with
mains supply and socket (9). Please use only original charger/main unit as
otherwise the warranty will be affected. The unit does not work with non-
rechargeable batteries.
Aligning the PBL 3P: For approximate adjustment of the lasers, the top part
of the PBL 3P can be turned on the base. Precise positioning can then be
done with the precision adjustment knob (3). The adjustable feet (6) allow
the device to be positioned on sloping surfaces.
Switching on the PBL 3P: Turn the ON/OFF switch (2) to the right, thereby
releasing the transport securing device. The lasers can now be individually acti-
vated via buttons 14, 15, 16. To obtain maximum visibility of the laser line, the
hand receiver mode must be switched off (button 13). In this case, it is not
possible to work with the laser receiver.
Note:
If the device is too far off the horizontal (more than 3°), the lasers will blink.
Align the device using the adjustable feet (6) or place on a more level
surface. The round vial (8) is provided as an aid to alignment.
B
A
C
D
E
G
F
I
A
Power indicator
B
Switch accuracy
short range / long range
C
LED for accuracy
green / red
D
ON / OFF switch
E
Sound ON / OFF
F
Receiver field for laser beam
G
LED’s for Laserindication (front,
side, backside)
H
Universal mount
I
Battery compartment
(backside)
ENGLISH 11
H
