Hardware
Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection
Power consumption Max. ca. 14 W
Environment Temperature range 0 – 40°C, humidity 0 – 95%,non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting,
Kensington lock; measures 210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces
LANCOM 730VA over ISDN
WAN: VDSL2
a VDSL2 as per ITU G.993.2; profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a
a Compatible to VDSL2 from Deutsche Telekom
a Compliant to: ADSL2+ over ISDN as per ITU G.992.5 Annex B with DPBO, ADSL2 over
ISDN as per ITU G.992.3/5 Annex B/J, ADSL over ISDN as per ITU G.992.1 Annex B
a Supports just one virtual connection at a time in ATM (VPI-VCI pair)
ETH 4 individual ports, 10/100/1000 Mbps Gigabit Ethernet, by default set to switch mode. Up to 3
ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in
the LCOS configuration.
Config (Com) Serial configuration interface / COM port (8-pin Mini-DIN):
9,600 – 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM-port server and provides transparent asynchronous serial-data transfer via TCP.
WAN protocols
VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without
DHCP), RIP-1, RIP-2, VLAN, GRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 dual
stack session), IP(v6)oE (autoconfiguration, DHCPv6 or static)
Declaration of conformity
For the declaration of conformity, see the product page on our website www.lancom-systems.eu
Package content
Manual Hardware Quick Reference (DE/EN),
Installation Guide (DE/EN)
Cable 1 DSL cable for an IP-based line, 4.25m
Power adapter External power supply adapter (230 V), NEST 12 V/1.5 A DC/S, barrel connector 2.1/5.5 mm
bayonet,
LANCOM Art.-No. 110723 or 111301 (EU,230V);
LANCOM Art.-No. 110829 or 111302 (UK, 230V)
a Power
Off Device switched off
Green on,
permanently
Device operational
Blinking
green/orange
Configuration password not set. Without a
configuration password, the configuration
data in the device is unprotected.
Blinking red Charge or time limit reached
b Online
Off WAN connection inactive
Green on,
permanently
WAN connection active
Red on,
permanently
WAN connection error
d ETH
Off No networking device attached
Green on,
permanently
Connection to network device operational,
no data traffic
Flickering green Data transmission
a b c d
S E T T I N G U P A N D C O N N E C T I N G T H E D E V I C E
T E C H N I C A L D A T A
LANCOM 730VA
Quick Reference Guide
This product contains separate modem firmware with open-source software components. These are subject to their
own licenses, in particular the General Public License (GPL). The license text for the modem firmware is available at
http://www.lancom-systems.de/docs/GPL/LC-DSL-Modem-Firmware-License-EN.txt. If the respective license demands,
the source files for the corresponding software components will be made available on a download server upon request.
Serial interface
Configuring the device via
the serial interface requires
a serial configuration cable
(available as an accessory).
Ethernet interface
Use the cable to connect one of
the interfaces ETH 1 to ETH 4 to
your PC or a LAN switch.
VDSL interface
Use the supplied DSL
cable for the IP-based
line to connect the VDSL
interface and the provider's
telephone socket. For
more information, please
contact your Internet service
provider.
ba
c
d
a cb d
c DSL
Off Interface deactivated
Green, on (constant) DSL connection active
Green, flickering DSL data transfer
Red, flickering DSL transfer error
Red/orange, blinking DSL hardware error
Orange, blinking DSL training
Orange, on (perma-
nently)
DSL sync
Green, blinking DSL connecting
