699083
18
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
15
Installation Tips
Installing the Magnetic Sensor
The magnetic sensor can be installed on windows, doors or any other object that can be opened or
closed. The sensor consists of two parts, the larger sensor part and the smaller magnet part. The sensor
attaches to the frame and the magnet to the moving part.
When installed correctly, the LED on the magnetic sensor blinks once when the two parts are separa-
ted by more than a centimetre. When closed, the spacing between the two parts must not be more
than one centimetre.
Both parts of the magnetic sensor attach with double sided tape or screws.
Do not install the magnetic sensor on metal surfaces or in places where there are a large number of
metal parts. Ensure the LED blinks when the window or doors opens.
IMPORTANT: On both parts of the magnetic sensor there is an arrow. Parts must be xed with the
arrow pointing towards you.
Connecting the Magnetic Sensor
1. Ensure the sensor is mounted next to the magnet at a distance of less than one centimetre.
2. Enter the passcode into the control panel and press “RECORD”.
3. Record button lights up.
4. Separate the two parts of the sensor from each other at a distance of greater than one centimetre.
5. The sensors will record the event. When the sensor is successfully paired, the control panel will beep.
If the control panel beeps twice, it means the sensor has already been paired.
Electric Lock Output
The PUSH and GND connector of the electric lock can be connected to the PUSH and GND at the rear
of the control panel.
Once the security system is connected to the electric lock and disarmed, the control panel sends a
signal to the lock and unlocks it.
NOTE: Doors equipped with an electric lock automatically unlock when there is a power failure. We strongly
recommend connecting a backup power device.
Installing the Control Panel
The control panel can be mounted directly on the wall or using the stand on any at surface.
Installing on the Wall
The control panel can be mounted on the wall using the bracket and screws included. Insert the con-
trol panel into the bracket from top to bottom. The bracket ensures that the tamper switch is conti-
nually depressed.
Installing on a Flat Surface
Using the stand, the control panel can be installed on any at surface. Insert the control panel into the
stand from top to bottom. The stand ensures that the tamper switch is continually depressed.
IMPORTANT: Pressing the tamper switch several times resets the system.
Assigning Sensors to Modes
Each sensor can be assigned to one of four dierent modes. The security system recognizes home
mode, normal mode, 24-hour mode and single zone mode.
IMPORTANT: Before you set the security system, decide which sensor to put in which group. If you
want to change which group the sensor is in, the sensor must be disconnected from the control
panel.
The gure below shows the sensor switch setting for each group.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lamax Shield Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lamax Shield Plus in de taal/talen: Duits, Engels, Pools als bijlage per email.

De handleiding is 2,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info