618565
6
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
10 11
bread will be continued automatically within 10 minutes, even without pressing the START/
STOP button. If the interruption time exceeds 10 minutes, the memory cannot be kept and you
must discard the ingredients in the bread pan and start again. If the dough has not entered the
risingphasewhenthepowersupplybreaksoff,youcanpresstheSTART/STOPbuttondirectlyto
continue the programme from the beginning.
WARNING DISPLAY
If the display screen shows “H HH” after you have pressed the START/STOP button and the
machine beeps continuously the temperature inside is too high. Stop the programme, open the
lid and allow the bread maker to cool down for 10 – 20 minutes.
Ifthedisplayscreenshows“LLL”afterpressingtheSTART/STOPbuttonandthemachinebeeps
continuouslythetemperatureinsideistoolow.PresstheSTART/STOPbutton,openthelidand
allow the bread maker to rest for 10 – 20 minutes to return to room temperature.
Ifthedisplayscreenshows“EEO”or“EE1”aftertheSTART/STOPbuttonhasbeenpressedthe
temperature sensor has developed a fault. Contact Lakeland Customer Services for further advice.
How to assemble the Bread Maker and using for the very first time
When the Bread Maker is used for the first time it may emit a slight burning smell when first
switched on. This is completely normal with a new heating element.
You will need to operate the Bread Maker empty for the very first use. This will also show you how
easy the Bread Maker is to use.
To do this;
1. Wash the bread pan and kneading paddle in hot, soapy water, rinse and dry thoroughly.
2. Place the Bread Maker on a flat, dry surface.
3. Position the bread pan in the baking chamber holding it at a slight angle and turning it
clockwise until it clicks into place.
4. Fix the kneading paddle onto the drive shaft.
5. Close the lid.
6. Switch on at the socket.
7. The Bread Maker will beep and the display screen will show the default setting 1,3:00
8. Press the MENU button repeatedly – the programme numbers will scroll through. Stop
pressing at programme number 11, 1:00 (BAKE). If you go past the number you require
simply keep pressing until programme 11 comes round again.
9. Selectprogramme11(BAKE)andpressSTART/STOP.
10. The bread maker will begin to count down and you can follow this on the display screen.
Leave the Bread maker to BAKE for 10 minutes. You will hear some intermittent clicks during
this time.
11. PresstheSTART/STOPbuttonrmlytostoptheprogramme.
12. Open the Bread Maker and allow cooling completely.
13. Lift out the kneading paddle then remove the bread pan by turning anti clockwise and lifting out.
14. Wash, rinse and dry the bread pan and kneading paddle again and replace.
You are now ready to make your first loaf.
Instructions for use
HOW TO MEASURE INGREDIENTS
One of the most important steps for making good bread is to use the exact measure of ingredients.
Always use the measuring cup and spoons provided with your Bread Maker.
If you prefer to use kitchen scales, metric measurements have also been included in the recipe section.
• Anyliquidshouldbemeasuredwiththemeasuringcuporspoonprovided.Observethelevel
of the measuring cup at eye level.
• When measuring cooking oil or other liquids, wash, rinse anddrythemeasuring cup and
spoon thoroughly before measuring any other ingredients.
• Drymeasuringmustbedonebygentlyspooningingredientsintothemeasuringcupandthen,
once filled, level it off with a knife. Do not be tempted to add more than required or to pack
it down tightly into the cup as it will affect the recipe. When measuring small amounts of
dry or liquid ingredients, use the measuring spoon supplied. Measurements must be level, not
heaped, as this could affect the recipe.
• Themaximumquantityofouryoushoulduseis2
¹
³
/
rd cups, 375g; the maximum amount of
yeast is 5g, 2 teaspoons.
The measuring cup holds 160g, 200ml
1 teaspoon = 5ml
1 tablespoon = 15ml
MAKING A LOAF – Things to remember
How to put the ingredients into the bread pan;
Ensure the ingredients are put into the Bread Maker in the exact order given in the recipe,
for example;
First, liquid ingredients at room temperature or as specified in the recipe.
Second, dry ingredients. Add the flour gently and make sure it is evenly distributed over the
liquid. If you tip it onto the liquid too fiercely the liquid may seep up through the flour and affect
the action of the yeast. This is particularly important if you are using the time delay.
Last, yeast. The yeast must be kept separate from the wet ingredients and salt. Create a
small hole in the dry ingredients using your finger or a spoon and place the yeast in the hole.
Make sure the yeast is fresh – check the use by date.
Ensure the ingredients are at room temperature unless otherwise stated. Water should be cold
unless the recipe states otherwise (as in ULTRA FAST programme).
Dry ingredients
Yeast or sodaSalt
Water or liquid
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lakeland 16147 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lakeland 16147 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info